Ordering number : ENA1341B Bi-CMOS LSI For DSC, and Cell Phone Camera Modules LV8413GP H-Bridge × 2-channel Motor Driver Overview The LV8413GP is an H-bridge × 2-channel motor driver IC and is able to control 4 modes of forward, reverse, brake, and standby. This IC housed in a miniature package is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones. Features • Saturation drive H-bridge : 2-channels • Built-in thermal protection circuit • Built-in low voltage malfunction prevention circuit • Incorporates a transistor for driving photosensors Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Power supply voltage 1 VM max 6 V Power supply voltage 2 VCC max 6 V Output peak current IO peak Outs 1 to 4, t ≤ 10msec, ON-duty ≤ 20% 600 mA Output continuous current 1 IO max1 Outs 1 to 4 400 mA Output continuous current 2 IO max2 PI 15 mA Allowable power dissipation Pd max Mounted on a circuit board* 0.7 W Operating temperature Topr -30 to +85 °C Storage temperature Tstg -55 to +150 °C * Specified circuit board : 50.0mm × 40.0mm × 0.8mm : glass epoxy four-layer board (2S2P) Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 62712 SY 20120613-S00001/51111 SY/N1908 MS PC 20081016-S00007 No.A1341-1/7 LV8413GP Recommended Operating Conditions at Ta = 25°C Parameter Symbol Conditions Ratings Unit Power supply voltage range 1 VM 2.5 to 5.5 Power supply voltage range 2 VCC 2.5 to 5.5 V Logic input voltage range VIN 0 to VCC+0.3 V Input frequency fIN IN1 to 4, INA to 100 V kHz Electrical Characteristics at Ta = 25°C, VM = 5V, VCC = 3.3V, unless otherwise specified. Ratings Parameter Symbol Conditions Unit min typ max 1.0 μA Standby mode current drain Istn IN1 to 4 = “L” VM current drain IM Any one of IN1 to 4 = “H”, with no load 70 150 μA VCC current drain ICC Any one of IN1 to 4 = “H” 0.6 1.2 mA VCC low-voltage cutoff voltage VthVCC 1.85 2.10 2.35 V Low-voltage hysteresis voltage VthHYS 100 150 200 mV Thermal shutdown temperature TSD Design guarantee value * 160 180 200 °C Thermal hysteresis width ΔTSD Design guarantee value * 10 30 50 °C Rin IN1 to 4 50 100 200 kΩ 1.0 μA 33 60 μA OUT1 to 4 Logic pin internal pull-down resistance Logic pin input current Logic input high-level voltage IinL VIN = 0, IN1 to 4 IinH VIN = 3.3V, IN1 to 4 20 VinH IN1 to 4 2.5 V Logic input low-level voltage VinL IN1 to 4 1.0 V Output on-resistance Ronu IO = 400mA, upper ON resistance 0.5 0.8 Ω Rond IO = 400mA, lower ON resistance 0.3 0.5 Ω 1 μA 1.0 Output leakage current IOleak Diode forward voltage VD ID = -400mA Rin INA Logic pin input current IinL VIN = 0, INA IinH VIN = 3.3V, INA 20 Logic input high-level voltage VinH INA 2.5 Logic input low-level voltage VinL INA Output on-resistance Ron IO = 10mA Output leakage current IOleak V PI Logic pin internal pull-down 50 100 200 kΩ 1.0 μA 50 μA 1.0 V resistance 33 V 4 6 Ω 1 μA No.A1341-2/7 LV8413GP Package Dimensions unit : mm (typ) 3318 TOP VIEW SIDE VIEW BOTTOM VIEW Allowable power dissipation, Pd max – W (0.13) 16 0.4 2.6 (C0.116) 2 1 0.5 LASER MARKED INDEX (0.55) (0.035) 0.8 SIDE VIEW 0.25 Pd max – Ta 0.8 (0.125) 2.6 Specified board : 50.0×40.0×0.8mm3 4-layer glass epoxy (2S2P) 0.7 0.6 0.4 0.36 0.2 0 – 30 0 30 60 90 120 Ambient temperature, Ta – °C SANYO : VCT16(2.6X2.6) 12 11 10 9 SGND VCC VM PGND Pin Assignment 13 PI OUT1 8 14 INA OUT2 7 OUT3 6 OUT4 5 LV8413GP 15 IN4 Top View IN1 VM PGND IN3 IN2 16 1 2 3 4 No.A1341-3/7 LV8413GP Block Diagram + VM VM OUT1 OUT2 OUT3 OUT4 PGND PGND Thermal shutdown circuit Logic circuit VCC + - LVS circuit 15mA max SGND IN1 IN2 IN3 IN4 INA PI VCC CPU No.A1341-4/7 LV8413GP Pin Functions Pin No. Pin name Pin Function 2 IN1 Control signal input pin 1 IN2 Control signal input pin 16 IN3 Control signal input pin 15 IN4 Control signal input pin 14 INA Control signal input pin Equivalent Circuit VCC 10kΩ 100kΩ GND 8 OUT1 Outpin 7 OUT2 Outpin 6 OUT3 Outpin 5 OUT4 Outpin VM PGND 13 PI Outpin GND 11 VCC Logic system power supply connection pin 3 VM Motor power supply connection pin 10 VM Motor power supply connection pin 12 SGND Signal ground 4 PGND Power ground 9 PGND Power ground No.A1341-5/7 LV8413GP Logic input specifications • Common channels 1 to 2 ch1 : IN1 to IN2, OUT1 to OUT2 ch2 : IN3 to IN4, OUT3 to OUT4 Input Output IN1 IN2 OUT1 OUT2 Operation mode L L OFF OFF Standby H L H L CW (forward) L H L H CCW (reverse) H H L L Brake • Output stage transistor function VM VM VM ON OFF OFF ON OFF OFF OFF ON ON OFF ON ON (Forward) (Reverse) (Brake) • Photo sensor driving transistor When thermal shutdown and VCC low-voltage cut circuits are activated, OUT1 through OUT4 are turned OFF under control of the internal circuit. But the output (PI) of photo sensor driving transistor continues operation. Input Photo sensor driving INA PI L OFF H ON No.A1341-6/7 LV8413GP SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of Jun, 2011. Specifications and information herein are subject to change without notice. PS No.A1341-7/7