Ordering number : ENA1819 Bi-CMOS LSI LV8416CB For DSC, and Cell Phone Camera Modules H-Bridge × 4-channel Motor Driver Overview The LV8416CB is an H-bridge×4-channel motor driver IC and is able to control 4 modes of forward, reverse, brake and standby. This IC housed in a wafer level package (WLP) is optimum for use in a stepping motor driving system for DSC or a camera module of cell phones. Functions • Saturation drive H-bridge: 4-channels • Various protection circuits (thermal protection, low voltage malfunction protection) Specifications Absolute Maximum Ratings at Ta = 25°C Parameter z Symbol Conditions Ratings Unit Power supply voltage VCC max 6.0 V Output peak current IO peak Output continuous current IO max Channels 1 to 4, t ≤ 10msec, ON-duty ≤ 20% 600 mA Channels 1 to 4 400 Allowable power dissipation Pd max Mounted on a circuit board* mA 1000 mW Operating temperature Topr -30 to +85 °C Storage temperature Tstg -55 to +150 °C Specified circuit board : 60mm × 60mm × 1.7mm, glass epoxy two-layer board. Recommended Operating Conditions at Ta = 25°C Parameter Symbol Power supply voltage range VCC op Logic input voltage range VIN Input frequency fIN Conditions IN1 to 8 Ratings Unit 2.5 to 5.5 V 0 to VCC+0.3 V to 100 kHz Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 81110 SY 20100728-S00004 No.A1819-1/5 LV8416CB Electrical Characteristics at Ta = 25°C, VCC = 5V Parameter Symbol Ratings Conditions min Standby mode current drain Ist IN1 to IN8 = “L” VCC current drain ICC1 VCC=VIN1 = 3.3V ICC2 VCC=VIN1 = 5.0V typ Unit max 40 1.0 μA 80 160 μA μA 50 100 200 VCC low-voltage cutoff voltage VthVCC 2.0 2.25 2.5 V Low-voltage hysteresis voltage VthHIS 100 150 200 mV Thermal shutdown temperature TSD Design guarantee value * 160 180 200 °C Thermal hysteresis width ΔTSD Design guarantee value * 10 30 50 °C Logic pin input current IinL VIN = 0V, IN1 to IN8 1.0 μA IinH VIN = 3.3V, IN1 to IN8 33 μA Logic input high-level voltage Vinh IN1 to IN8 Logic input low-level voltage Vinl IN1 to IN8 Input circuit current consumption ICCin VIN = 3.3V, power hit of IN1 to IN8 *1 Ronu Rond Input pin 8.3 16.5 0.5×VCC V 0.2×VCC V 80 250 μA IO = 100mA, upper ON resistance 0.5 0.75 Ω IO = 100mA, lower ON resistance 0.3 0.55 Ω 1.0 μA 0.75 1.2 V 30 Motor driver Output on-resistance Output leakage current IOleak Diode forward voltage VD ID = -100mA Turn-on time Ton Time of Input 50% → Output 50% *2 0.10 0.50 μsec Turn-off time Toff Time of Input 50% → Output 50% 0.15 0.55 μsec 0.4 At the rise time Tr Time of Output 10% → 90% 0.05 0.20 μsec Standing fall time Tf Time of Output 90% → 10% 0.05 0.20 μsec *1: The input circuit current consumption in CMOS circuit composition of the input steps is generated though it is unquestionable for IC operation when impressing it to VIN voltage that is lower than the VCC voltage. *2: Time from change edge to change edge (0.5×VCC) of control input at output level. It doesn't have an enable pin, and as for this IC, either in the input pin begins and the internal logic begins operation of "High". Therefore, the turn-on time becomes about three microseconds only at the initial motion work of the input terminal "High". Package Dimensions unit : mm (typ) 3401 BOTTOM VIEW 0.235 0.4 C B 1.27 A 0.4 2.47 0.69 MAX 6 0.175 SIDE VIEW 5 4 3 2 Pd max - Ta 1.5 1 0.245 SANYO : WLP18(2.47X1.27) Allowable power dissipation, Pd max -- W SIDE VIEW 0.235 TOP VIEW Specified circuit board : 60.0 × 60.0 × 1.7mm3 glass epoxy board 1.00 1.0 0.52 0.5 0 —30 0 30 60 90 Ambient temperature, Ta -- C No.A1819-2/5 120 LV8416CB Pin Assignment Top view Bottom view 1 OUT2 OUT1 VCC VCC OUT1 OUT2 1 2 OUT3 IN1 IN2 IN2 IN1 OUT3 2 3 OUT4 IN3 IN4 IN4 IN3 OUT4 3 4 OUT5 IN5 IN6 IN6 IN5 OUT5 4 5 OUT6 IN7 IN8 IN8 IN7 OUT6 5 6 GND OUT7 OUT8 OUT8 OUT7 GND 6 A B C C B A OUT4 OUT5 Block Diagram OUT1 OUT2 OUT3 OUT6 OUT7 OUT8 Logic Circuit VCC Low voltage protection circuit GND Overheating protection circuit Standard voltage IN1 IN2 IN3 IN4 IN5 IN6 IN7 IN8 CPU No.A1819-3/5 LV8416CB Pin Functions Pin No. Pin name Pin Function B2 IN1 Control signal input pin C2 IN2 Control signal input pin B3 IN3 Control signal input pin C3 IN4 Control signal input pin B4 IN5 Control signal input pin C4 IN6 Control signal input pin B5 IN7 Control signal input pin C5 IN8 Control signal input pin Equivalent Circuit VCC GND B1 OUT1 Motor driver output pin A1 OUT2 Motor driver output pin A2 OUT3 Motor driver output pin A3 OUT4 Motor driver output pin A4 OUT5 Motor driver output pin A5 OUT6 Motor driver output pin B6 OUT7 Motor driver output pin C6 OUT8 Motor driver output pin VCC GND C1 VCC Logic system power supply connection pin A6 GND Signal ground Logic input specifications • Common channels 1 to 4 ch1 : IN1 to IN2, OUT1 to OUT2 ch2 : IN3 to IN4, OUT3 to OUT4 ch3 : IN5 to IN6, OUT5 to OUT6 ch4 : IN7 to IN8, OUT7 to OUT8 Input Output IN1 IN2 OUT1 OUT2 Operation mode L L OFF OFF Standby H L H L CW (forward) L H L H CCW (reverse) H H L L Brake No.A1819-4/5 LV8416CB • Output stage transistor function VCC VCC VCC ON OFF OFF ON OFF OFF OFF ON ON OFF ON ON (Forward) (Reverse) (Brake) SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellctual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2010. Specifications and information herein are subject to change without notice. PS No.A1819-5/5