FUSEHOLDERS / SICHERUNGSHALTER PCB mount / Leiterplattenmontage FAB 5 20 mm for / for Fuseholder Type FAB horizontal shocksafe category PC2 Version with “kicked” PCB-terminals, tin plated 0031.3558 50 75 Drilling diagram 100 • bayonet type fuse carrier, slotted • with or without “kicked” PCB-terminals • degree of protection IP40 from frontside, according to IEC 60529 • suitable for equipment with protection classes I and II according to IEC 60536 Admissible power acceptance in Watt Derating curve Technical data • Rated voltage: 250 V • Rated current: 10 A • Rated power acceptance at ambient air temperature Ta 23 °C: 2 W • Power acceptance at higher Ta: see derating curves Take note of the information on pages 215–219 • Allowable ambient air temperatures Ta for accessible parts: –40 °C to +85 °C • Contact resistance: 5 mΩ • Dielectric strength: > 4 kV, 50 Hz, 1 Min.* • Insulation resistance (500 V DC/1 Min): > 103 MΩ • Solderability: 235 °C/2 s, according to IEC 60068-2-20, test Ta, method 1 • Resistance to soldering heat: 350 °C/5 s, according to IEC 60068-2-20, test Tb, method 1B • Materials socket: thermoset, UL 94 V-0 fuse carrier: thermoplastic, UL 94 V-0 Ambient air temperature Ta °C * between metal mounting plate and live parts Standards IEC 60127-6 EN 60127-6 UL 512, CSA C22.2-39 Approvals, Patents VDE SEV VDE SEMKO (10 A/250 V) (10 A/250 V) (10 A/250 V) UL CSA (12 A/250 V) (10 A/250 V) Patents in U.S. (No. 4,072,385) and in further countries Order No. / 0031.3551 0031.3558 0031.3555 Fuse carrier Fuseholder complete, with straight terminals, black / slotted Fuseholder complete, with kicked terminals, black / slotted Fuse carrier, bayonet, black / slotted Accessories see page 183 www.schurter.com 155