SMF102FL ~ SMF107FL Voltage 100V~ 1000V 1.0 Amp Surface Mount Fast Recovery Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES SOD-123FL Glass passivated device Ideal for surface mounted applications Low leakage current Metallurgically bonded construction High temperature soldering: 260°C /10 seconds at terminals A F B G MECHANICAL DATA Case: JEDEC SOD-123FL, molded plastic over passivated chip Terminals: Solder Plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.0008 ounces, 0.022 gram Mounting position: Any C E REF. MARKING Product Marking Code Product Marking Code SMF102FL RB SMF105FL RJ SMF103FL RD SMF106FL RK SMF104FL RG SMF107FL RM Millimeter Min. Max. D REF. Millimeter Min. Max. A 2.70 2.90 E 0.10 0.30 B 1.80 2.00 F 0.80 1.20 C 1.55 1.25 G 0.35 0.85 D 3.50 3.90 PACKAGE INFORMATION Package MPQ Leader Size SOD-123FL 2.5K 7’ inch http://www.SeCoSGmbH.com/ 09-May-2011 Rev. A Any changes of specification will not be informed individually. Page 1 of 3 SMF102FL ~ SMF107FL Voltage 100V~ 1000V 1.0 Amp Surface Mount Fast Recovery Rectifiers Elektronische Bauelemente MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameters Part Number Symbol SMF 102FL SMF 103FL SMF 104FL SMF 105FL SMF 106FL SMF 107FL Unit Recurrent Reverse Voltage (Max.) VRRM 100 200 400 600 800 1000 V RMS Voltage (Max.) VRMS 70 140 280 420 560 700 V DC Blocking Voltage (Max.) VDC 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA = 65°C 1 Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load TL=25°C Typical thermal resistance junction to ambient 2 Typical thermal resistance junction to lead 4 Maximum reverse recovery time 3 I(AV) 1.0 A IFSM 20 A RθJA 180 K/W RθJC 40 K/W TRR Operating Temperature Range Storage Temperature Range 150 250 500 ns Tj -55~150 °C TSTG -55~150 °C Notes： 1. Averaged over any 20 ms period. 2 2. Thermal resistance junction to ambient, 6.0 mm copper pads to each terminal. 3. Measured with IF=0.5A, IR=1A, IRR=0.25A. 4. Thermal resistance junction to case. ELECTRICAL CHARACTERISTICS Symbol Min. Typ. Max. Units Maximum instantaneous 5 VF - - 1.3 V forward voltage @ 1.0A Maximum DC reverse current IR - - 10 μA TA=25°C At rated DC blocking voltage IR - - 50 μA TA=125°C CJ - 4 - pF Parameters Typical junction capacitance 6 Testing Conditions Notes： 5. Pulse test:300μs pulse width,1% duty cycle. 6. Measured at 1.0MHz and applied average voltage of 4.0V DC. http://www.SeCoSGmbH.com/ 09-May-2011 Rev. A Any changes of specification will not be informed individually. Page 2 of 3 SMF102FL ~ SMF107FL Elektronische Bauelemente Voltage 100V~ 1000V 1.0 Amp Surface Mount Fast Recovery Rectifiers RATINGS AND CHARACTERISTIC CURVES (SMF102FL~SMF107FL) http://www.SeCoSGmbH.com/ 09-May-2011 Rev. A Any changes of specification will not be informed individually. Page 3 of 3