FFM101FL thru FFM107FL Fast Recovery Rectifiers Glass Passivation Junction 0.035(1.90) 0.067(1.70) 0.053(1.35) 0.031(0.80) 0.110(2.80) 0.102(2.60) 0.146(3.70) 0.130(3.30) Ordering Information 0.045(1.15) 0.032(0.81) Part Number 0.012(0.30) 0.002(0.05) Remark FFM10xFL General FFM10xFL-H Halogen Free FFM10xFL-Q Automotive PRIMARY CHARACTERISTICS IF 1A SOD-123F VRRM 50~1000V IFSM 20A Dimensions in inches and (millimeters) VF 1.3 13V TJ max 150°C 0.033(0.85) 0.014(0.35) Features Mechanical Date ‧Ideal for surface mount applications ‧Cases: SOD-123F ‧Easy pick and place ‧Case Material: Molded Plastic. UL Flammability ‧Built-in strain relief Classification Rating 94V-0 ‧Fast switching speed ‧Terminals: Lead free Plating (Tin Finish) Solderable per MIL-STD-202, Method 208 ‧AEC-Q101 qualified ‧Polarity: Cathode Band ‧Weight: 0.022 grams (approximate) MAXIMUM RATINGS (TA=25°C unless otherwise noted) SYMBOL FFM 101FL FFM 102FL FFM 103FL FFM 104FL FFM 105FL FFM 106FL Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V PARAMETER FFM UNIT 107FL 1000 V IF 1.0 A IFSM 20.0 A Maximum Instantaneous Forward Voltage IF=1A @ 25°C VF 1.3 V Maximum DC Reverse Current @ Tc=25°C at Rated DC Blocking Voltage @ Tc=100°C IR 5 100 uA Maximum Reverse Recovery Time(NOTE2) trr Typical Junction Capacitance(NOTE1) Cj Maximum average forward rectified current Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load Marking Code Typical Thermal Resistance(NOTE3) Operating Temperature Range Storage Temperature Range 150 500 250 ns 20 RA RB RD RG pF RJ RK RM RθJA 180 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C NOTES: 1.Measured at 1.0MHZ and applied reverse voltage of 4.0V DC 2.Measured with IF=0.5A, IR=1A, IRR=0.25A 3.Device mounted on FR-4 substrate, 1"*1", 2oz, single-sided, PC boards with 0.1"*0.15" copper pad. Revision: B01 lizhenhui MB:+86-13537087568 E-mail:[email protected] FFM101FL thru FFM107FL Fast Recovery Rectifiers Glass Passivation Junction FIG 1-TYPICAL FIG. 1 TYPICAL FORWARD CURRENT DERATING CURVE FIG 2-TYPICAL FIG. 2 TYPICAL FORWARD CHARACTERISTICS 100.00 1 0.8 06 0.6 0.4 0.2 0 0 25 50 75 100 125 150 INSTANTANEOUS FORW WARD CURRENT (A) AVERAGE FORWA ARD CURRENT,(A) 1.2 10.00 1.00 0.10 TJ=25℃ PULSE WIDTH 300us 2% DUTY CYCLE 0.01 0.2 0.4 0.6 AMBIENT TEMPERATURE(℃) 1.2 1.4 1.6 1.8 FIG. 4-TYPICAL REVERSE CHARACTERISTICS 100 30 25 TJ=25℃ 8.3ms Single H lf Si Half Sine Wave JEDEC 20 25℃ R REVERSE LEAKAGE CURREN NT (uA) PE EAK FORWARD SURGE CURR RENT (A) 1.0 FORWARD VOLTAGE (V) FIG. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 15 10 5 10 100℃ 1 0.1 0.01 0.001 0 1 10 20 100 40 NUMBER OF CYCLES AT 60Hz 60 80 100 PERCENTAGE RATED PEAK REVERSE VOLTAGE (%) FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-Reverse Recovery Time Characteristic and Test Circuit 50 JUNCT TION CAPACITANCE (pF) 0.8 50W NONINDUCTIVE trr 10W NONINDUCTIVE ( ) (+) 40 25Vdc (approx.) D.U.T. PULSE GENERATOR (NOTE 2) ( ) 1W NONINDUCTIVE 30 OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 20 2. Rise Time= 10ns max., Source Impedance= 50 ohms. | | | | | | | | +0.5A 0 -0.25A (+) -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm 10 0 0 1 10 100 REVERSE VOLTAGE (V) Revision: B01 lizhenhui MB:+86-13537087568 E-mail:[email protected]