HFM101FL thru HFM107FL High Efficiency Rectifiers Glass Passivation Junction 0..032(0.81) 0..045(1.15) 1 0.075(1.9) 0.067(1.7) 2 0.053(1.35) 0.031(0.80) 0.004 Max. (0.10) 0.114(2.90) 0.106(2.70) 0.153(3.90) 0.138(3.50) Ordering Information Part Number 0.033 (0.85) 0.014(0.35) Remark HFM10xFL General HFM10xFL H HFM10xFL-H Halogen Free HFM10xFL-Q Automotive PRIMARY CHARACTERISTICS IF 1A VRRM 50~1000V IFSM 30A VF 1.0,1.3,1.7 V TJ max 150°C SOD-123F Dimensions in inches and (millimeters) Features Mechanical Date ‧Low profile package ‧Cases: SOD-123F ‧Ideal for automated placement ‧Case Material: Molded Plastic. UL Flammability ‧Low reverse current Classification Rating 94V-0 ‧Fast reverse recovery time ‧Terminals: Terminals: Lead free Plating (Tin Finish) Solderable per MIL-STD-202, Method 208 ‧ Component in accordance to RoHS 2002/95/EC ‧AEC-Q101 qualified ‧Polarity: Cathode Band ‧Weight: 0.002 grams (approximate) MAXIMUM RATINGS (TA=25°C unless otherwise noted) SYMBOL HFM 101FL HFM 102FL HFM 103FL HFM 104FL HFM 105FL HFM 106FL Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V PARAMETER Maximum average forward rectified current Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load IF 1.0 A IFSM 30.0 A Maximum Instantaneous Forward Voltage IF=1A @ 25°C VF Maximum DC Reverse Current @ Tc=25°C at Rated DC Blocking Voltage @ Tc=100°C IR Maximum Reverse Recovery Time(NOTE2) trr Typical Junction Capacitance(NOTE1) Cj MARKING CODE T i l Thermal Typical Th l Resistance(NOTE3) R i t (NOTE3) Operating Temperature Range Storage Temperature Range HFM UNIT 107FL 1.0 1.7 1.3 V 5 100 uA 50.0 75.0 ns 20 H1 H2 H3 H4 pF H5 H6 H7 RθJA 80 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C NOTES: 1.Measured at 1.0MHZ and applied reverse voltage of 4.0V DC 2.Measured with IF=0.5A,IR=1A,IRR=0.25A 3.Device mounted on FR-4 substrate, 1"*1", 2oz, single-sided, PC boards with 0.1"*0.15" copper pad. Revision: B01 lizhenhui MB:+86-13537087568 E-mail:[email protected] HFM101FL thru HFM107FL High Efficiency Rectifiers Glass Passivation Junction FIG 1-TYPICAL FIG. 1 TYPICAL FORWARD CURRENT DERATING CURVE FIG 2-TYPICAL FIG. 2 TYPICAL FORWARD CHARACTERISTICS 100.00 1 0.8 06 0.6 0.4 0.2 0 0 25 50 75 100 125 150 HFM101FL~HFM104FL INSTANTANEOUS FORW WARD CURRENT (A) AVERAGE FORWA ARD CURRENT,(A) 1.2 HFM104FL 10.00 HFM105FL~HFM107FL 1.00 0.10 TJ=25℃ PULSE WIDTH 300us 2% DUTY CYCLE 0.01 0.2 0.4 0.6 AMBIENT TEMPERATURE(℃) 1.2 1.4 1.6 1.8 FIG. 4-TYPICAL REVERSE CHARACTERISTICS 100 R REVERSE LEAKAGE CURREN NT (uA) 30 PE EAK FORWARD SURGE CURR RENT 1.0 FORWARD VOLTAGE (V) FIG. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT TJ=25℃ 8.3ms Single H lf Si Half Sine Wave JEDEC 20 10 25℃ 10 100℃ 1 0.1 0.01 0.001 0.0001 0 1 10 20 100 NUMBER OF CYCLES AT 60Hz 40 60 80 100 PERCENTAGE RATED PEAK REVERSE VOLTAGE (%) FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-Reverse Recovery Time Characteristic and Test Circuit 50W NONINDUCTIVE 50 JUNCT TION CAPACITANCE (pF) 0.8 trr 10W NONINDUCTIVE ( ) (+) 40 25Vdc (approx.) D.U.T. PULSE GENERATOR (NOTE 2) ( ) 1W NONINDUCTIVE 30 OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. 20 | | | | | | | | +0.5A 0 5A 0 -0.25A (+) -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm 10 0 0 1 10 100 REVERSE VOLTAGE (V) Revision: B01 lizhenhui MB:+86-13537087568 E-mail:[email protected]