PENT1040D Universal 40 Watt (Pre-standard IEEE802.3at Compliant) High Power PoE Injector 1 Year Warranty •10/100 (MbPS) Data Rates •Self-contained Injector •100-250VAC Universal Input •Desktop Style / Non-vented Case •IEEE802.3af Compliant Detection, Disconnect, Overload and Over Voltage Control Function •Load Diagnostic LED •UNH IOL Test Report •Over Load Shutdown and Short Circuit Protection •Regulated Output With Low Ripple •Complies with EMI/RFI Regulations •CE Compliant • Midspan International Safety Standard Approvals Specifications Output Specifications Combined Line and Load Voltage Regulation Excluding Cord General Specifications ±1% Topology Switching-Fixed Frequency Flyback Dielectric Withstand Primary-Secondary Secondary-Ground 3000VAC, 4250VDC 500VDC Spacing 5mm Primary-Secondary Leakage Current Less than 250 uA Efficiency 75.1% min. EMC Information Emissions Harmonic VFF ESD RF EFI EFT Surge CDI CD Voltage Dips FCC Part 15. EN55022. EN61000-3-2 EN61000-3-3 EN61000-4-2. EN61000-4-3. EN61000-4-4. EN61000-4-5. EN61000-4-6. EN61000-4-8. EN61000-4-11 Class B Class B Level 2 Level 2 Level 2 Level 3 Level 2 Level 1 CE LVD, EMC, RoHS, WEEE, CE Compliant Hold-up Time @120VAC 18ms min. typ. Storage Temp -30° C to +85° C Approvals and Standards Safety cULus : UL/CSA60950 TUV : EN60950 CE: LVD, EMCD MTBF 100,000 Calculated Hours Ripple 1% Vp-p max. Transient Response 0.5ms for 50% Load Change Typical Protection Foldback Overcurrent Protection, Short Circuit Protection Input Specifications AC Input Voltage Range Line Frequency AC Input Current Protection Environmental Specifications 100-250VAC -10%, +6% 47-63Hz 1.0A max. Internal Primary Current Fuse, Inrush Limiting Operating Temperature 0° C to 40° C No Derating, Convectional Cooling Non Vented Case Thermal Performance Relative Humidity Non-Condensing 5% to 95% Altitude 0-10,000 feet SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com PENT1040D Universal 40 Watt (Pre-standard IEEE802.3at Compliant) High Power PoE Injector For the most current data and application support visit www.slpower.com Output Currents Output Voltage Min Max Ault Part Number PENT1040D5600F01 56 V 0.00 A 0.71 A Ripple Vp-p max. 40 W 560 mV Ault Part Number Key PENT 1 040 D 56 00 F 01 Product Family Name Number of Outputs Output Wattage Configuration Type Output Voltage Output Connector Input Configuration Standard (no modifications or special packaging) Input Configuration United Kingdom (G) Max Watts Australian IEC320Shaver C8 (E) w/ground C14 (N) (F) IEC320 w/o ground C18 (Q) Pin Connections N. America/ Japan (B) Europe (M) United Kingdom (G) Australian (E) Shaver C8 (N) General Specifications (continued from p. 1) Weight Case and Dimension 5.24L x 2.13W x 1.42H (in) 133.0L x 54.0W x 36.0H (mm) Case Material Black 94V0 Polycarbonate Cord and Connectors Personalized PoE Options (additional costs may apply): • Custom label artwork (excluding cord) 7 Ounces, 200 Grams Dual RJ45 jacks built into the enclosure • Custom agency approvals available • Surge protection (Input & Output) • Mounting bracket • Custom PoE modifications Power over Ethernet Plus (known as PoEP and/or PoE+) IEEE802.3at: • Proposed standard is in development; decision expected in the next 4-6 months • Operates on Cat5 and higher infrastructure • Uses all four pairs of standard Ethernet Category 5 cable to provide up to 56 watts of power • Backwards compatible with IEEE802.3af standard 87654321 J1 J1 Pins 1. Data Pair 1 2. Data Pair 1 3. Data Pair 2 4. + VDC 5. + VDC 6. Data Pair 2 7. - VDC 8. - VDC 87654321 J2 J2 Pins 1. Data Pair 1 2. Data Pair 1 3. Data Pair 2 4. No Connection 5. No Connection 6. Data Pair 2 7. No Connection 8. No Connection SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.9/3/08