PENT1040A Universal 40 Watt (IEEE802.3af Non-Compliant) High Power PoE Gigabit Injector •10/100/1000 (MbPS) Data Rates •Self-contained Injector •100-250VAC Universal Input •Desktop Style / Non-vented Case •IEEE802.3af Non-Compliant •Power ON LED •Over Load Shutdown and Short Circuit Protection •Regulated Output With Low Ripple •Complies with EMI/RFI Regulations •CE Compliant International Safety Standard Approvals Specifications Output Specifications Combined Line and Load Voltage Regulation Excluding Cord General Specifications ±1% Topology Switching-Fixed Frequency Flyback Dielectric Withstand Primary-Secondary Secondary-Ground 3000VAC, 4250VDC 500VDC Spacing 5mm Primary-Secondary Leakage Current Less than 250 uA Efficiency 75.1% min. EMC Information Emissions Harmonic VFF ESD RF EFI EFT Surge CDI CD Voltage Dips FCC Part 15. EN55022. EN61000-3-2 EN61000-3-3 EN61000-4-2. EN61000-4-3. EN61000-4-4. EN61000-4-5. EN61000-4-6. EN61000-4-8. EN61000-4-11 Class B Class B Level 2 Level 2 Level 2 Level 3 Level 2 Level 1 CE LVD, EMC, RoHS, WEEE, CE Compliant Hold-up Time @120VAC Storage Temp Approvals and Standards Safety Ripple 1% Vp-p max. Transient Response 0.5ms for 50% Load Change Typical Protection Foldback Overcurrent Protection, Short Circuit Protection Input Specifications AC Input Voltage Range Line Frequency AC Input Current Protection Environmental Specifications 100-250VAC -10%, +6% 47-63Hz 1A max. Internal Primary Current Fuse, Inrush Limiting Operating Temperature 0° C to 40° C No Derating, Convectional Cooling Non Vented Case Thermal Performance Relative Humidity Non-Condensing 5% to 95% Altitude 0-10,000 feet 18ms min. typ. -30° C to +85° C cULus : UL/CSA60950 TUV : EN60950 CE: LVD, EMCD SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com PENT1040A Universal 40 Watt (IEEE802.3af Non-Compliant) High Power PoE Gigabit Injector Output Currents Output Voltage Min Max Ault Part Number PENT1040A5600F01 For the most current data and application support visit www.slpower.com 56 V 0.00 A 0.71 A Ripple Vp-p max. 40 W 560 mV Ault Part Number Key PENT 1 040 A 56 00 F 01 Product Family Name Number of Outputs Output Wattage Configuration Type Output Voltage Output Connector Input Configuration Standard (no modifications or special packaging) Input Configuration United Kingdom (G) Max Watts Australian IEC320Shaver C8 (E) w/ground C14 (N) (F) IEC320 w/o ground C18 (Q) Pin Connections N. America/ Japan (B) Europe (M) United Kingdom (G) Australian (E) Shaver C8 (N) General Specifications (continued from p. 1) MTBF 100,000 Calculated Hours Weight (excluding cord) 7 Ounces, 200 Grams Case and Dimension 5.24L x 2.13W x 1.42H (in) 133.0L x 54.0W x 36.0H (mm) Case Material Black 94V0 Polycarbonate Cord and Connectors Dual RJ45 jacks built into the enclosure 87654321 J2 (Power and Data Out) Personalized PoE Options (additional costs may apply): • Custom label artwork • Custom agency approvals available • Surge protection (Input & Output) • Mounting bracket • Custom PoE modifications J1 (Data In) (Rear of Unit) PoE Gigabit Pin-out Connections: POWER (+) Data Pins 4/5 (Data + PWR) 87654321 Data Pins 1/2 (Data Only) Data Pins 3/6 (Data Only) Data Note: POWER (-) Pins 7/8 (Data + PWR) = Transformer SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.8/28/08