PW149RB Universal 12 Watt Series ITE / Switch Mode Power Supply 1 Year Warranty •100-240 VAC Universal Input •Single Output to 10W – 12W •Eight Models Available from 5V to 48V •Meets Safety Agency Requirements •Complies with Class B EMI/RFI Regulations •CE Compliant •Impact Resistant Polycarbonate Enclosure •Private Label Marking Available •Modified and Custom Designs Also Available • Meets ENERGY STAR Criteria Level IV and EISA Requirements — see reverse side for details International Safety Standard Approvals Specifications Output Specifications General Specifications Line and Load Voltage Regulation Excluding cord +/-1% (±5% at no load) Topology Switching-Fixed Frequency Flyback Ripple % V p-p max. for output 1 current of >0.175A Dielectric Withstand 3000VAC, 4250VDC Primary-Secondary Transient Response 0.5ms for 50% Load Change Typical Spacing >5mm Primary-Secondary Leakage Current <250 uA Protection Foldback Over-current Protection Short Circuit Protection Efficiency Meets Energy Star Level IV EMI Class B CE CE Compliant Hold-up Time @120VAC @240VAC 17ms, Typical 30ms, Typical Storage Temp -30° C to +85° C Approvals and Safety Standards UL/cUL60950-1, TUV:EN60950-1 Input Specifications Voltage 100-240VAC -10%, +6% Line Frequency 47-63Hz Input Current 90VAC Input 0.4A max. Protection Internal Primary Current Fuse, Inrush Limiting Weight 4.80 Ounces, 136 Grams MTBF 500,000 Calculated Hours Case and Dimension 3.35L x 1.81W x 1.30H (in) 85.0L x 46.0W x 33.0H (mm) 0° C to 40° C Case Material Black 94VO Polycarbonate Cord and Connectors Environmental Specifications Thermal Performance Relative Humidity Non-condensing 5% to 95% Altitude 0-10,000 feet Operating temperature with no derating convectional cooling Non vented case 6ft. 2 Conductor, 18AWG, 20AWG, 22AWG, AULT#3 Connector. Other connectors are also available. SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com PW149RB Universal 12 Watt Series ITE / Switch Mode Power Supply Output Currents Output Voltage Min Max Ault Part Number Max Watts PW149RB05XXX01 5V 0.00 A 2.00 A 10.0 W PW149RB09XXX01 9V 0.00 A 1.30 A 12.0 W PW149RB12XXX01 12 V 0.00 A 1.00 A 12.0 W PW149RB15XXX01 15 V 0.00 A 0.80 A 12.0 W PW149RB18XXX01 18 V 0.00 A 0.67 A 12.0 W PW149RB24XXX01 24 V 0.00 A 0.50 A 12.0 W PW149RB33XXX01 33 V 0.00 A 0.36 A 12.0 W PW149RB48XXX01 48 V 0.00 A 0.25 A 12.0 W Ault Part Number Key PW149 R B 48 XX X 01 Product Family Name Manufacturing Location Design Revision Changes Voltage DC Connector Number Input Configuration/ Model Type Standard (no modifications or special packaging) Input Configuration IEC320 w/ground C14 (F) IEC320 IEC320 w/ground w/o ground C14 C18 (F)(Q) IEC320 N. America/ N. America/ Europe Japan w/o ground Japan (M) (B) C18 (B) (Q) Europe United (M) Kingdom (G) United Australian Kingdom (E) (G) Australian Shaver (E) C8 (N) 2007 Energy Independence and Security Act – EISA he Energy Independence and Security Act of 2007 was passed in December T of 2007 and addresses minimum efficiency standards and standby levels for Class A external power supplies that are 250 watts and under. This law stipulates that external power supplies manufactured on July 1, 2008 and beyond meet certain minimum efficiency and standby criteria as defined below. Minimum Efficiency Criteria ctive mode is defined as when a power supply’s input is connected to line A voltage AC and its output is connected to a DC or AC load drawing a portion of the product’s power output. Depending on the power rating for the power supply, it must meet the minimum efficiency criteria outlined below. Energy-Efficiency Criteria for Active Mode: output power on minimum average adapter label efficiency percentage ≥ 0.50 * output power on adapter label 0 to ≤ less than 1 watt ≥ [0.09 * Ln (output power on adapter > 1 to ≤ 51 watts label )] + 0.50 ≥ 0.85 > 51 watts he power supply must also meet a requirement for when its input is T connected to a line voltage AC but its output is not connected to a load. Depending on the power output of the supply, it must keep its energy consumption below the following values. Energy Consumption Criteria for No Load Mode: output power on maximum power consumption adapter label in no-load mode ≤ 0.5 watts 0 to < 250 watts Shaver C8 (N) Specify the Input Configuration Code in your order. Pin Connections Pinout Code Center contact: positive Description Switchcraft 760 plug or equivalent Suggested Mating Switchcraft 712A jack or equivalent Other Connectors are available by special order SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.6/9/08