Specifications - SL Power Electronics

PW156
Universal 75 Watt Series
ITE / Switch Mode Power Supply
 100-240 VAC Universal Input
 ENERGY STAR Level IV Compliant
 Low Life-Cycle Operation Cost
 Desktop Style
 Complies with EMI/RFI Regulations
 CE Compliant (LVD, EMC, WEEE, RoHS)
 Impact Resistant, Non-vented Polycarbonate Enclosure
 Modified and Custom Designs also Available
International Safety Standard Approvals
Specifications
General Specifications
Output Specifications
Line and Load
Voltage Regulation
Excluding Cord
Ripple
Transient Response
3.0ms max. for 50%
Load Change
Protection
Cycle-by-Cycle
Current Limiting
+/-1%
Topology
1% Vp-p max.
Efficiency
Slew Rate of 0.1A/us
Automatic Recovery
for Overload or Short
Circuit; Active OVP
Input Specifications
Voltage
100-240VAC Nominal
Line Frequency
47-63Hz
Input Current
2.0A max.
Protection
Input Fuse
Inrush Limited
Hold-up Time
Quasi-resonant Fly-back
Current-mode Control
Energy Star Level IV
@120V
16ms, Typical
Storage Temp
-20° C to +85° C
Approvals and
Safety Standards
UL60950-1,
TUV/EN60950-1
IEC60950-1
MTBF
165,000 Hours
Weight
408g (14.8oz)
Case and Dimension
LP6
5.44L x 2.19W x 1.32H (in)
138.2L x 55.6W x 33.5H (mm)
Case Material
Cord and Connectors
V-0 Polycarbonate
Bl ack
1m 2-Conductor,
18AWG Standard
AULT#3 Connector.
Environmental Specifications
Thermal Performance
Operating Temperature
0° C to 40° C
with no Derating
Cooling
Convectional
Non-ventilated Enclosure
Relative Humidity
Non-condensing
5% to 95%
Altitude
0-10,000 feet
SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com
PW156
Universal 75 Watt Series
ITE / Switch Mode Power Supply
Output
Voltage
Ault Part Number
For the most current data and application support visit www.slpower.com
Min
Output Currents
Max
Max
Watts
PW156RA1203N01
12 V
0.00 A
6.30 A
75.0 W*
PW156RA1503N01
15 V
0.00 A
5.00 A
75.0 W
PW156RA1803N01
18 V
0.00 A
4.20 A
75.0 W
PW156RA2403N01
24 V
0.00 A
3.10 A
75.0 W
Ault Part Number Key
PW156
R
A
12
03
Output
Type
Output
Product
Manufacturing
Voltage
Revision
Family
Location
Connector
Style
Name
*12V model rated 70W with input voltages rated 100-119V, 75W with input voltages rated 120-240VAC.
EMI Compliance
N
01
Input
Connector
Style
Standard Item
(other numbers
for custom)
Optional Features
FCC
EN55024
Harmonic
ESD
IEC 61000-3-2
IEC 61000-4-2
RFS
EFT
Surge
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
Class B
Conducted and Radiated
Class A
CD Level 2
AD Level 3, Criterion B
Level 2, Criterion A
Level 2, Criterion A
Level 3, Criterion B
Various output cord wire gauges and connector styles available. See
Ault connector style sheets for connector options
“Power-on” LED
IEC 61000-3-2 Class D Harmonic Input Cord
Active, Auto-recovery Over Temperature Protection Circuit
Synchronous Rectification for Output Voltages Lower than 12V
Private Label Marking
Input Configuration
Pin Connections
Shaver
C8 (N)
Pinout Code
Center contact: positive
Description
Switchcraft 760 plug or equivalent
Suggested Mating
Switchcraft 712A jack or equivalent
Other Connectors are available by special order
SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com
Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power
accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.12/12/12