100, 150, 165, 180, 250, 350, 360, 500, 520 WATTS SINGLE OUTPUT SC-100 SC-150 SC-165 SC-180 SC-250 SC-350 SC-360 SC-500 SC-520 Featuring: • Output voltages from 3.3 V to 48 V • Power density to 3.6 watts/in3 • Meets international safety agency requirements • Remote sense, thermal protection, and OVP • Cannot be damaged by no load or low line conditions • AC automatic line selection option • System air or self cooling options • Available in 48 Vdc input STANDARD SC SERIES 150 WATTS 9” x 5” x 2.5” L FRAME Option C MODEL OUTPUT RATING SC-3.3-30 3.3V @ 30A SC-5-30 5V @ 30A SC-12-15 12V @ 15A SC-15-12 15V @ 12A SC-24-7.5 24V @ 7.5A SC-28-6.5 28V @ 6.5A SC-48-3.7 48V @ 3.7A PWR OUT 100 150 180 180 180 180 180 350 WATTS 11.5” x 5” x 2.5” MODEL SC-5-70 SC-12-30 SC-15-24 SC-24-15 SC-28-13 SC-48-8 OUTPUT RATING 5V@ 70A 12V@ 30A 15V@ 24A 24V@ 15A 28V@ 13A 48V@ 8A PWR OUT 350 360 360 360 360 360 250 WATTS 9” x 5” x 2.5” MODEL OUTPUT RATING SC-3.3-50 3.3V @ 50A SC-5-50 5V @ 50A SC-12-21 12V @ 21A SC-15-17 15V @ 17A SC-24-11 24V @ 11A SC-28-9 28V @ 9A SC-48-5.5 48V @ 5.5A PWR OUT 165 250 250 250 250 250 250 500 WATTS 11.5” x 5” x 2.5” MODEL SC-5-100 SC-12-42 SC-15-34 SC-24-21 SC-28-18 SC-48-11 OUTPUT RATING 5V @ 100A 12V @ 42A 15V @ 34A 24V @ 21A 28V @ 18A 48V @ 11A PWR OUT 500 500 500 500 500 520 Option F Consider this series of single output switching power supplies for the design of your high end OEM products ranging from process controls to sophisticated telecommunications systems. Incorporating Condor design features such as surface mount components and single PCB construction for high reliability, these switchers are rugged enough to withstand the harsh environments that typify industrial control applications. They also incorporate the sophistication and advance design features needed to power computer and telecommunications systems. Check out the specifications of this series, your single choice for single output switchers. Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com 100, 150, 165, 180, 250 WATTS 9”x 5”x 2.5” SC-100,150, 180, 250 Dimensions: 350, 360, 500, 520 WATTS 11.5”x 5”x 2.5” SC-350, 360, 500, 520 SC-100, 150, 165, 180, 250 SC-350, 360, 500, 520 2.0 lbs - 0.9 kgs 3.8 lbs - 1.7 kgs Inches Millimeters SPECIFICATIONS: ALL MODELS INPUT AC Input: 90-132 Vac/180-264 Vac, 47 to 63 Hz. User selectable. See option “A” for automatic line selection. 150 watt units fused for 7 A. 250 watt units fused for 10 A. 350 and 500 watt units fused for 15 A. Inrush: Cold start AC current is less than 16 A at 115 Vac and 32 A at 230 Vac for 150 watt models; 10 A at 115 Vac and 18 A at 230 Vac for 250 watt models; 80 A at 115 Vac and 20 A at 230 Vac for 350 and 500 watt models. Limited by thermistor. Holdup Time: 16 ms minimum after removal of power, at nominal line, full load. Efficiency: 80% typical. Brownout Protection: Holds regulation to 85 Vac or 170 Vac. OUTPUT Adjustability: User adjustable ±10% minimum. Line & Load Reg: ±1% over AC input range and 0 to 100% load change. Ripple & Noise: Less than 1% p-p or 100 mV, whichever is greater. Remote Sense: Compensates for 250 mV total line drop. Open sense lead protection. Temperature Coefficient: 0.02% per degree C. Stability: 0.1% over 8 hours after 30 minutes warm-up. Transient Response: Output voltage returns to within 1% in less than 500 µs for a 50% load change. Peak transient does not exceed 5%. Overload Protection: All outputs are protected against overload and short circuit. Automatic recovery upon removal of fault. Overvoltage Protection: Protects load against power supply induced overvoltage. Trip point is factory set so that output voltage cannot exceed 136% of nominal. Remote Inhibit: Contact closure to the negative sense line drops output power to nominal zero. Not available in 150 or 180 watt units. Reverse Voltage: Protected against reverse voltage up to supply current rating. ENVIRONMENTAL Thermal Protection: Shuts down power supply if overheated. Automatic recovery. Temperature Range: 0° to 50°C at full ratings. Derate to half power at 70 °C. Safety Agencies: Most models are approved to UL1950; CSA 22.2 #234; IEC 950 and TÜV EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive). Conducted RFI: Meets FCC Part 15, Subpart J, Class A; EN55022 Class B; CISPR 22 Class B. Output Isolation: Isolated from ground 50 Vdc, except 100 Vdc for 48 Vdc models. Cooling: 30 CFM required to achieve full ratings. OPTIONS: Option “A”, AC Auto-Range: Automatically selects proper AC line voltage range to enable power operation at either 115 or 230 Vac without user intervention. Option “C”, Cover*: Limits contact with power supply interior. Option “F”, Fan/Cover Assembly*: Cover with integral ball-bearing fan provides proper cooling to achieve full ratings at 50°C ambient temperature. Option “G”, DC Power Good ( 5 V outputs)*: Provides a TTL “1” open collector when output is above 4.6 V nominal. Not available if option “P” is selected. Option “P”, AC Power Fail: Provides TTL “0” 5 ms before output voltage goes out of regulation band upon loss of AC power. VMEbus compatible, provides 48 mA sink current capability. Not available if option “G” is selected. Option “V”, Fan/Cover Assembly*: Low profile, end venting cover with integral ball-bearing fan. *Options C, F, G, and V not available on 150 and 180 watt models. Consult factory for other available options. AC INPUT FUNCTION Input Select Short 115 VAC Open 230 VAC CONNECTOR 0.110,0.187, or 0.250 male Fastons TB1- (L ) TB1- (N) TB1- ( ) Line Neutral Safety Ground Line 1 Line 2 Safety Ground Barrier strip #6-32 screws 3/8” centers LOCATION Terminal +5V Terminal COM Terminal +V Terminal COM Terminal +V Terminal COM CONNECTOR Bus bars #6-32 screws DC OUTPUT FUNCTION Output Voltage MODEL All SC-150W models All SC-250W models All SC-350W and 500W models Bus bars #8-32 screws Bus bars #1/4-20 screws STATUS AND CONTROL FUNCTION SC-150W CONNECTOR Remote Sense +S #6-32 screw terminals –S AC Power Fail PF DC Power Good Inhibit J1-4 (IH) SC-250W SC-350 & 500W J1-1 (+S) J1-4 (+S) J1-2 (–S) J1-3 (–S) J1-3 (PF) J1-2 (PF) CONNECTOR AMP MTA type 640456-4 pin header (locking) J1-1 (INH) Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com