433.92 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02587S DESCRIPTION • • • 433.92 MHz SAW Filter with a 7 MHz typical 3dB bandwidth 3.8 x 3.8 mm LCC package. RoHS compliant. TYPICAL PERFORMANCE Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02587S Rev A 26-Mar-2010 ECN 36650 Page 1 of 3 433.92 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02587S SPECIFICATION Parameter Center Frequency, FC 1 Insertion Loss 433.05 – 434.79 MHz Attenuation (Reference level from 0 db) 389.0 – 392.0 MHz 411.0 – 414.0 MHz 454.0 – 457.0 MHz 475.0 – 478.0 MHz Amplitude Ripple 433.05 – 434.79 MHz Source/Load Impedance Ambient Temperature Min - Typ 433.92 1.9 Max 3.7 Units MHz dB 42 40 40 42 - 54 50 51 52 0.3 1.5 dB dB dB dB dB - - - -94 50 25 Min Max -40 -10 - 85 60 10 3 - ppm/˚C ohms ˚C MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level DC Voltage Units ˚C ˚C dBm V MATCHING CIRCUIT Note: No Matching Components Required Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02587S Rev A 26-Mar-2010 ECN 36650 Page 2 of 3 433.92 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02587S PACKAGE OUTLINE SUGGESTED FOOTPRINT Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02587S Rev A 26-Mar-2010 ECN 36650 Page 3 of 3