SPECTRUM SF1575BA02506S

1575.42 MHz SAW Filter
55 MHz Bandwidth
Part Number SF1575BA02506S
DESCRIPTION
•
•
•
1575.42 MHz SAW bandpass filter with a 55 MHz bandwidth for GPS applications.
2.5 x 2 mm LCC package.
RoHS compliant.
TYPICAL PERFORMANCE
Amp
10 dB/div
Amp
1 dB/div
Phase
20 deg/div
Delay
25 ns/div
Center = 1575.42 MHz, 30 MHz/div (312.5 kHz incr)
S11 (1325.42-1825.42 MHz)
S22 (1325.42-1825.42 MHz)
Spectrum Microwave, Inc.
400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401
www.SpectrumMicrowave.com
DSSF1575BA02506S Rev X7 30-Dec-10
Page 1 of 3
1575.42 MHz SAW Filter
55 MHz Bandwidth
Part Number SF1575BA02506S
SPECIFICATION
Parameter
Min
Typ
Max
-
2.2
dB
1.0
dB
Insertion Loss
-
1575.4
2
1.5
Passband Amplitude Ripple1
-
0.1
Center Frequency FC
1
2
Units
MHz
Stopband Rejection, DC to 1400 MHz
35
37
-
dB
Stopband Rejection, 1400 to 1475 MHz2
30
34
-
dB
Stopband Rejection, 1475 to 1525 MHz2
25
37
-
dB
Stopband Rejection, 1625 to 1640 MHz2
30
45
-
dB
Stopband Rejection, 1640 to 2000 MHz2
32
34
-
dB
Stopband Rejection, 2000 to 3000 MHz2
20
28
-
dB
-
1.2
2.0
--
VSWR
1
Source and Load Impedance
Ambient Temperature
Notes:
50
25
ohms
˚C
1. Defined over 1574.22 to 1576.62 MHz.
2. Relative to 0 dB
MAXIMUM RATINGS
Parameter
Storage Temperature Range
Operating temperature Range
Input Power Level
Max. D. C. Voltage between Each Terminal
Min
Max
-40
-40
-
85
85
10
5
Units
˚C
˚C
dBm
V
MATCHING CIRCUIT
2
4
Input
50 Ω
Single ended
Output
50 Ω
Single ended
GND
All other pads
GND
Notes:
•
•
External matching components are not required.
Device is intended to operate in a 50 Ω single ended system.
Spectrum Microwave, Inc.
400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401
www.SpectrumMicrowave.com
DSSF1575BA02506S Rev X7 30-Dec-10
Page 2 of 3
1575.42 MHz SAW Filter
55 MHz Bandwidth
Part Number SF1575BA02506S
PACKAGE OUTLINE
Date Code:
Y= Last digit of Year
WW = Week
Package Material:
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 1 µm min,
over a 1.3-8.9 µm Ni plating
PAD NO.
2
4
1,3
SUGGESTED FOOTPRINT
DESCRIPTION
INPUT
OUTPUT
GROUND
NOTES:
DIMENSIONS IN MM
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice.
© 2010 All rights reserved.
Spectrum Microwave, Inc.
400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401
www.SpectrumMicrowave.com
DSSF1575BA02506S Rev X7 30-Dec-10
Page 3 of 3