914.5 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0915BA02620S DESCRIPTION • • • 914.5 MHz SAW filter with a 16 MHz typical 3dB bandwidth. 3.8 mm Square LCC Package. RoHS compliant. TYPICAL PERFORMANCE Spectrum Microwave 324 Clark Street, Worcester, MA 01606, USA • Phone 1-508-852-5400 • Fax 1-508-852-8456 www.SpectrumMicrowave.com DSSF0915BA02620S Rev A ECN 36650 8-Apr-2010 Page 1 of 3 914.5 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0915BA02620S SPECIFICATION Parameter Center Frequency (Fc) 1 Maximum Insertion Loss (910.5 to 918.5 MHz) Amplitude Ripple (910.5 to 918.5 MHz) Attenuation (Reference level from maximum insertion loss) 10 to 830 MHz 830 to 893.5 MHz 893.5 to 895.5 MHz 959 to 980 MHz 980 to 1200 MHz Source Impedance Load Impedance Ambient Temperature Min - Typ 914.5 2.8 0.5 Max 4 2.0 45 36 27 32 42 - 52 45 40 45 47 50 50 25 - Units MHz dB dB p-p dB dB dB dB dB ohms ohms °C MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Input Power Level DC Voltage Min Max -40 -20 - 85 65 10 5 Units ˚C ˚C dBm V MATCHING CIRCUIT Notes: 1. Filter to operate in a single ended system. 2. External matching components are not required. Spectrum Microwave 324 Clark Street, Worcester, MA 01606, USA • Phone 1-508-852-5400 • Fax 1-508-852-8456 www.SpectrumMicrowave.com DSSF0915BA02620S Rev A ECN 36650 8-Apr-2010 Page 2 of 3 914.5 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0915BA02620S PACKAGE OUTLINE Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 µm min, over a 1.3-8.9 µm Ni plating MARKING Units: mm Pin Configuration: Input: Output: Ground: 2 6 1, 3, 4, 6, 7, 8 SUGGESTED FOOTPRINT ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 324 Clark Street, Worcester, MA 01606, USA • Phone 1-508-852-5400 • Fax 1-508-852-8456 www.SpectrumMicrowave.com DSSF0915BA02620S Rev A ECN 36650 8-Apr-2010 Page 3 of 3