434 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02617S DESCRIPTION • • • 433.92 MHz SAW Filter with nominal 7 MHz bandwidth. 3 x 3 mm LCC Package, 6 pads. RoHS compliant. TYPICAL PERFORMANCE Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02517S Rev X2 4-Feb-11 Page 1 of 3 434 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02617S SPECIFICATION Parameter Min Typ Max Center Frequency (Fc) Nominal Bandwidth (1 dB) Insertion Loss (433.00 – 434.71 MHz) - 433.92 7 2.0 2.7 MHz MHz dB Amplitude Ripple (433.00 – 434.71 MHz) - 0.3 1.3 dB p-p 42.0 40.0 40.0 42.0 54.0 50.0 51.0 52.0 - Attenuation (Reference level from 0 dB) (389.0 to 392.0 MHz) (411.0 to 414.0 MHz) (454.0 to 457.0 MHz) (475.5 to 478.5 MHz) Ambient Temperature System Source and Load Impedance 25 50 Units dB dB dB dB ˚C Ohm MAXIMUM RATINGS Parameter Operating Temperature Range Storage Temperature Range Input Power Level DC voltage Min -10 -40 - Max 60 85 +10 3 Units ˚C ˚C dBm V MATCHING CIRCUIT 2 5 Input 50 Ω Single ended Output 50 Ω Single ended GND All other pads GND Notes: • • External matching components are not required. Device is intended to operate in a 50 Ω single ended system. Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02517S Rev X2 4-Feb-11 Page 2 of 3 434 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02617S PACKAGE OUTLINE NOTE: Dimensions shown are all in mm. FOOTPRINT PAD Configuration: 2 Input 5 Output 1,3,4,6 Ground MARKING SMI ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2011 All rights reserved. Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02517S Rev X2 4-Feb-11 Page 3 of 3