STMICROELECTRONICS STICE

STICE CF/Stice_Connect
AD/Stice_Connect AS/Stice_Connect
Full-featured cost-effective emulation system
for ST microcontrollers
Data brief
Features
■
Emulation system
– Real-time emulation of STM8 MCUs (CPU
frequency from 250 Hz up to 50 MHz)
– Application profiling for execution time or
number of executions at instruction/source
code/function level
– Coverage analysis on code (at
instruction/source code/function level) or
data (memory locations or variables) for the
entire memory space
– Unlimited instruction breakpoints for the
entire MCU memory space
– Data breakpoints
– Advanced breakpoints with up to 4 levels of
user-configured conditions
– Control of application memory accesses
configurable at byte level
– Trace of 128 K records with time stamp
– Non-intrusive read/write on-the-fly to data
memory during emulation
– Power supply follower managing STM8
application voltages in range 1.65 to 5.5 V
(0.8 V possible for MEB with specific TEB)
– 8-bit probe analyzer
– Input trigger and 2 output triggers
– In-circuit debugging/programming via
SWIM
May 2011
CF/Stice_Connect
AD/Stice_Connect
AS/Stice_Connect
– USB 2.0 (high-speed) interface to host PC
■
Connection accessories
– CF/Stice_Connect: 60- or 120-pin flexible
cable to connect to the application
– AD/Stice_Connect: connection adapter to
adapt the connection flex to the target
device package
– AS/Stice_Connect: adapter socket
soldered onto the application and receiving
the AD/Stice_connect
Table 1.
Part numbers
Contents
STICE
Emulation system
CF/Stice_Connect
Connection flex
AD/Stice_Connect
Connection adapter for
target device package or
SWIM connector
AS/Stice_Connect
Adapter socket
Doc ID 13797 Rev 4
For further information contact your local STMicroelectronics sales office.
Device summary
1/9
www.st.com
9
Description
STICE
Description
The STice is the advanced in-circuit emulation system from STMicroelectronics. It offers a
complete range of proven debugging features such as advanced breakpoints and trace
recording. In addition, it provides new profiling and coverage capabilities to help detect and
eliminate dead code and bottlenecks in application execution.
In addition to emulation, the STice provides in-circuit debugging and programming capability
for ST microcontrollers via the ST single wire interface module (SWIM). SWIM allows nonintrusive debugging of an application while it runs on the target microcontroller.
The STice is supported by the free STM8 toolset, which includes the ST Visual Develop
(STVD) integrated development environment for building, debugging and fine-tuning
applications, the ST Visual Programmer (STVP) microcontroller programming interface and
the STM8 Assembler.
The STice offers improved cost-effectiveness by allowing users to order exactly what they
need to meet their development requirements and to adapt their emulation system to
support existing and future ST microcontrollers. All these connection accessories and the
STice emulation boards can be ordered independently as replacement parts.
2/9
Doc ID 13797 Rev 4
STICE
Working environment
Working environment
The STice is a modular emulation system that connects to a host PC via a USB interface, to
an application board in place of the target microcontroller. It is made up of:
●
A main emulation board (MEB) that provides interface and emulation resources
common to all emulated MCU families,
●
A target emulation board (TEB) that provides the analog emulation resources for a
specific family of microcontrollers.
It may also include a peripheral emulation board (PEB) that provides emulation resources
specific to an emulated peripheral for a microcontroller sub-family.
Figure 1.
STICE and connection accessories (full emulation configuration)
&REE34TOOLSET
346$AND3460RUNNINGONYOUR0#DRIVE34ICE
34)#%
INCLUDESALLEMULATIONRESOURCES
-%"4%"AND0%"
#&3TICE?#ONNECT
#ONNECTIONFLEXTOCONNECTTO
APPLICATIONBOARD
!$3TICE?#ONNECT
#ONNECTIONADAPTERTOADAPT
CONNECTIONCABLETO-#5
!33TICE?#ONNECT
!DAPTERSOCKETONAPPLICATION
BOARDTOPLUGINEMULATORIN
PLACEOF-#5
For emulation, STice connects to an application board via connection accessories that you
specify when ordering the STice.
The STice emulation system and connection accessories are shown in Figure 1. The
connection accessories for emulation are:
●
Connection flex (CF/Stice_Connect) – flexible cable (60- or 120-pin depending on the
target MCU) that relays signals from the STice to your application board.
●
Connection adapter (AD/Stice_Connect) – adapts the connection flex either to the
target microcontroller footprint or to the SWIM connector on your application board.
●
Adapter socket (AS/Stice_Connect) – socket that solders to your application board in
place of your MCU and receives the connection adapter. Sockets also allow installation
of your target microcontroller.
Doc ID 13797 Rev 4
3/9
Working environment
STICE
The free STM8 toolset provides all the software required to develop and debug applications
with STice, and to program an application to a microcontroller. Software includes:
Figure 2.
●
STVD – Integrated development environment (IDE) that runs on the host PC connected
to the emulator and allows users to edit, build and debug applications and then
program them to the target STM8 microcontroller. STVD supports the full range of
emulation and in-circuit debugging features for STice. It also offers a quick
programming interface based on STVP, for programming microcontrollers without
leaving STVD.
●
STVP – Full-featured software programming interface that runs on the host PC
connected to the emulator. Provides the full range of features for device programming
including a project mode for saving programming configurations and automating
programming sequences.
In-circuit debugging/in-circuit programming configuration
2IGHTPANEL
(OST0#RUNNING
346$FOR)#0AND)#$OR
3460FOR)#0
)#0
)#$PORTON34ICERIGHTPANELFOR)#$)#0
USING37)!$3TICE?#ONNECT)#$)#0ADAPTER
RELAYEDTOMICROCONTROLLERALLOWS
CONNECTIONOFTHEFLATCABLEFROM34ICE
9OUR
MICROCONTROLLER
53"CONNECTIONTOHOST0#
4/9
Doc ID 13797 Rev 4
STICE
Ordering STice
Ordering STice
The STice emulation system is designed in a modular fashion so that you can order just the
components that you need to emulate your target microcontroller.
To help you order what you need, refer to Table 2 for a description of each component and to
Table 3 for the list of accessories required for your microcontroller. Make sure to use the
correct order codes.
Table 2.
Device contents
Part numbers
Order codes
Contents
Emulation system
STICE
STICE-SYSxxx(1)
Includes emulator case with:
– MEB, TEB and PEB(2) for a microcontroller sub-family
– USB cable
– Power supply
– Trigger cables
– Analyzer input cable
Connection flex
CF/FP60
60-pin connection cable for connection to the application board
CF/FP120
120-pin connection cable for connection to the application board
CF/Stice_Connect
Connection adapter
AD/xxxxxx-xxx(1)
AD/Stice_Connect
AD-ICD/ICP
A connection adapter that is specific to your microcontroller’s
package
ICD/ICP adapter kit for STice
Adapter socket
AS/Stice_Connect
AS/xxxxxxx(1)
AS-DIP-SO
A socket that is specific to your microcontroller’s package
1. Refer to Table 3: Connection accessories for STice systems for the order codes required for your microcontroller.
2. Peripheral emulation board (PEB) is provided only when required to emulate a specific sub-family of microcontrollers.
Doc ID 13797 Rev 4
5/9
Ordering STice
Table 3.
MCU
STM8AFxx
STM8L101
STM8L15x
STM8L16x
Connection accessories for STice systems
Package
(size, pitch in
mm)
Stice system
Connection
flex
Connection
adapter
Adapter
socket
LQFP32
(7x7, 0.8)
STICE-SYS001
CF/FP60
AD/QFP32B-A03
AS/QFP32BC
LQFP48
(7x7, 0.5)
STICE-SYS001
CF/FP60
AD/QFP48B-A03
AS/QFP48BA
LQFP64
(10x10, 0.5)
STICE-SYS001
CF/FP120
AD/QFP64C-B02
AS/QFP64CA
LQFP80
STICE-SYS001
(14x14, 0.65)
CF/FP120
AD/QFP80F-B01
AS/QFP80FB
TSSOP20
(6.5x4.4,
0.65)
STICE-SYS001
QFN20
(3x3, 0.5)
STICE-SYS005
QFN28
(4x4, 0.5)
STICE-SYS005
QFN32
(5x5, 0.5)
STICE-SYS005
LQFP32
(7x7, 0.8)
STICE-SYS005
CF/FP60
TSSOP20
(6.5x4.4,
0.65)
STICE-SYS005
CF/FP60
QFN28
(4x4, 0.5)
STICE-SYS009
QFN32
(5x5, 0.5)
STICE-SYS009
QFN48
(7x7, 0.8)
STICE-SYS009
LQFP32
(7x7, 0.8)
STICE-SYS009
LQFP48
(7x7, 0.5)
LQFP64
(10x10, 0.5)
CF/FP60
-(1)
In circuit
debug/program
adapters
AD/TSSO20A-A02 AS/TSSO20AB
AD/QFN20J-Z01
AS/QFN20JA
AD/QFN28H-Z01
AS/QFN28HA
AD/QFN32A-Z01
AS/QFN32AA
AD/QFP32B-A04
AS/QFP32BC
AD-ICD/ICP
AD/TSSO20A-A01 AS/TSSO20AB
AD/QFN28H-Z01
AS/QFN28HA
AD/QFN32A-Z01
AS/QFN32AA
AD/QFN48B-Z02
AS/QFN48BA
CF/FP60
AD/QFP32B-A04
AS/QFP32BC
STICE-SYS009
CF/FP60
AD/QFP48B-A04
AS/QFP48BA
STICE-SYS009
CF/FP120
AD/QFP64C-B03
AS/QFP64CA
LQFP80
STICE-SYS009
(14x14, 0.65)
CF/FP120
AD/QFP80F-B02
AS/QFP80FB
-(1)
(2)
AS/TSSO20AB
TSSOP20
(6.5x4.4,
0.65)
6/9
STICE
STICE-SYS009
-(1)
Doc ID 13797 Rev 4
STICE
Table 3.
MCU
Ordering STice
Connection accessories for STice systems (continued)
Package
(size, pitch in
mm)
Stice system
Connection
flex
Connection
adapter
Adapter
socket
SDIP32
(400 mils,
1.778)
STICE-SYS001
CF/FP60
AD/DIP32C-A03(3)
AS-DIP-SO
SDIP32
(400 mils,
1.778)
STICE-SYS001
CF/FP60
AD/DIP32C-A02(4)
AS-DIP-SO
QFN20
(3x3, 0.5)
STICE-SYS001
AD/QFN20J-Z01
AS/QFN20JA
QFN32
(5x5, 0.5)
STICE-SYS001
QFN32
(5x5, 0.5)
STICE-SYS001
LQFP32
(7x7, 0.8)
STICE-SYS001
CF/FP60
LQFP32
(7x7, 0.8)
STICE-SYS001
CF/FP60
LQFP44
(10x10, 0.8)
STICE-SYS001
LQFP48
(7x7, 0.5)
STM8Sx0x
-(1)
AD/QFN32A-Z03
(3)
AD/QFN32A-Z02
(4)
AD/QFP32B-A05
(3)
AD/QFP32B-A03
AS/QFN32AA
AS/QFN32AA
AS/QFP32BC
(4)(5)
AS/QFP32BC
CF/FP60
AD/QFP44C-A02
AS/QFP44CC
STICE-SYS001
CF/FP60
AD/QFP48B-A03
AS/QFP48BA
LQFP64
(10x10, 0.5)
STICE-SYS001
CF/FP120
AD/QFP64C-B02
AS/QFP64CA
LQFP64
(14x14, 0.8)
STICE-SYS001
CF/FP120
AD/QFP64F-B01
AS/QFP64FC
LQFP80
STICE-SYS001
(14x14, 0.65)
CF/FP120
AD/QFP80F-B01
AS/QFP80FB
TSSOP20
(6.5x4.4,
0.65)
STICE-SYS001
CF/FP60
In circuit
debug/program
adapters
AD-ICD/ICP
AD/TSSO20A-A02 AS/TSSO20AB
1. “-”: no accessories required.
2. Contact your nearest ST Sales offices.
3. STM8Sx03xx.
4. STM8S105xx.
5. STM8S207xx.
Doc ID 13797 Rev 4
7/9
Revision history
STICE
Revision history
Table 4.
8/9
Document revision history
Date
Revision
Changes
31-Mar-2008
1
Initial release.
10-May-2010
2
Modified as CB-xx parts are now obsolete.
08-Nov-2010
3
Modified Table 1, Table 2 and Figure 1 as part numbers changed:
– AS/xxxxxx became AS/Stice_Connect
– AD/xxxxxx-xxx and AD-ICD/ICP became AD/Stice_Connect
– CF/FPxxx became CF/Stice_Connect
Order code AS-DIP-SO added to Table 2.
24-May-2011
4
Removed CB-xxx part numbers from the whole document.
Added STice accessories description and ordering information.
Doc ID 13797 Rev 4
STICE
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 13797 Rev 4
9/9