ES07B-ES07D Surface Mount Rectifiers REVERSE VOLTAGE: 100 - 200 V CURRENT: 1.0 A SOD - 123FL Features 1.9± 0.1 1.0±0.2 Cathode Band Top View Glass passivated device Ideal for surface mouted applications Low leakage current Metallurgically bonded construction High temperature soldering: 250℃/10 seconds at terminals 0.10-0.30 2.8±0.1 1.4± 0.15 ◇ ◇ ◇ ◇ ◇ 0.6±0.25 Mechanical Data ◇ ◇ ◇ ◇ Case:JEDEC SOD-123FL,molded plastic over passivated chip 3.7±0.2 Polarity: Color band denotes cathode end Weight: 0.003 ounces, 0.01 gram Mounting position: Any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single hase,half wave,60Hz,resistive or inductive load.For capactive load,derate current by 20%. ABSOLUTE RATINGS Device marking code ES07B ES07D EB ED UNITS Maximum recurrent peak reverse voltage VRRM 100 200 V Maximum RMS voltage V RMS 70 140 V Maximum DC blocking voltage VDC 100 200 V Maximum average forword I(AV) 1.0 A IFSM 30 A RJθA 180 K/W Maximum reverse recovery time (NOTE 3) trr 25 ns Operating temperature range Tj - 55 --- + 150 ℃ TSTG - 55 --- + 150 ℃ rectified current T A=65℃ (NOTE 1) Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load T L=25℃ Typical thermal resistance (NOTE 2) Storage temperature range NOTES:1.Averaged over any 20 ms period. 2. Thermal resistance junction to ambient, 6.0 mm 2 coppeer pads to each terminal. 3.Measured with I F=0.5A, IR=1A, Irr=0.25A. ES07B-ES07D Surface Mount Rectifiers ELECTRICAL CHARACTERISTICS Parameter Symbol Min Typ. Max. Unit VF - - 0.98 V - - 10 - - 100 - 4 - Maximum instantaneous (NOTE 4) forward voltage at 1.0A Maximum DC reverse current @TA=25℃ at rated DC blockjing voltage @T A=125℃ Typical junction capacitance (NOTE 5) IR Cj NOTES: 4.Pulse test:300µs pulse width,1% duty cycle. 5.Measured at 1.0MHz and applied average voltage of 4.0V DC. µA pF ES07B-ES07D Surface Mount Rectifiers Ratings AND Charactieristic Curves FIG.2 -- TYPICAL JUNCTION CAPACITANCE 100 10 10 T J =25 Pulse Width=300us 9 4 8 CAPACITANCE, pF 2 AMPERES INSTANTANEOUS FORWARD CURRENT FIG.1 --TYPICAL FORWARD CHARACTERISTIC 1.0 0.4 0.2 0.1 0.06 0.04 7 6 5 4 3 2 0.02 0.01 0.6 0.8 1 1.0 1.2 1.4 1.6 0 0 5 INSTANTANEOUS FORWARD VOLTAGE,VOLTS 20 25 30 35 40 FIG.4 -- FORWARD DERATING CURVE 1.2 TJ = 150°C 10 TJ = 125°C TJ = 100°C 1 TJ = 75°C TJ = 50°C 0.1 TJ = 25°C 0 100 200 300 400 500 600 700 800 900 INSTANTANEOUS REVERSE VOLTAGE,VOLTS Resistive or Inductive Load 1.0 0.8 AMPERES AVERAGE FORWARD CURRENT, 100 MICROAMPERES INSTANTANEOUS REVERSE CURRENT 15 REVERSE VOLTAGE,VOLTS FIG.3 -- TYPICAL INSTANTANEOUS REVERSE CHARACTERISTICS 0.01 10 0.6 0.4 0.2 3.0 x 3.0mm 40 µm Thick Copper Pad Areas 0 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE,℃ 160