GP15A THRU GP15M 50V-1000V 1.5A GLASS PASSIVATED JUNCTION RECTIFIER FEATURES ¨ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¨ High temperature metallurgically bonded construction ¨ Glass passivated cavity-free junction ¨ Capable of meeting environmental standards of MIL-S-19500 ¨ 1.5 Ampere operation at TA=55°C with no thermal runaway ¨ Typical IR less than 0.1mA ¨ High temperature soldering guaranteed: 350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AC molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS GP 15A GP 15B GP 15D GP 15G GP 15J GP 15K GP 15M UNITS Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 1.5 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps VF 1.1 Volts IR(AV) 100.0 mA IR 5.0 200.0 mA Typical reverse recovery time (NOTE 1) trr 2.0 ms Typical junction capacitance (NOTE 2) CJ 15.0 pF RQJA RQJL 45.0 20.0 °C/W TJ, TSTG -65 to +175 °C Maximum instantaneous forward voltage at 1.5A Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length atTA=55°C Maximum reverse current at rated DC blocking voltage TA= 25°C TA=150°C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Reverse recovery conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com GP15A THRU GP15M 50V-1000V 1.5A GLASS PASSIVATED JUNCTION RECTIFIER RATINGS AND CHARACTERISTIC CURVES GP15A THRU GP15M FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 HZ RESISTIVE OR INDUCTIVE LOAD 1.25 50 1.0 0.75 0.5 0.25 0.375"(9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 175 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - FORWARD CURRENT DERATING CURVE 1.5 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 20 10 0 AMBIENT TEMPERATURE, °C 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PULSE WIDTH=300µs 1% DUTY CYCLE TJ=150°C 1 TJ=25°C 0.1 0.01 0.4 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0.6 0.8 1.0 1.2 1.4 0 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 40 60 80 100 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE (°C/W) JUNCTION CAPACITANCE, pF 30 20 PERCENT OF RATED PEAK REVERSE VOLTAGE, % 100 10 1 0.1 0.01 0.1 1 10 100 t, PULSE DURATION, sec 1 10 100 REVERSE VOLTAGE, VOLTS E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com