EGP20A THRU EGP20G 50V-400V 2.0A GLASS PASSIVATED FAST EFFICIENT RECTIFIER FEATURES * * * * * * * GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage , high current capability Low leakage current High surge current capability o High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 MECHANICAL DATA Case : JEDEC DO-204AC molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.015 ounes , 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS EGP 20A EGP 20B EGP 20C EGP 20D EGP 20F EGP 20G UNITS Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS voltage VRMS 35 70 105 140 210 280 Volts Maximum DC blocking voltage VDC 50 100 150 200 300 400 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 2.0 Amps Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 75.0 Amps Maximum instantaneous forward voltage at 2.0A VF 1.25 Volts IR 5.0 100.0 µA Maximum reverse recovery time (NOTE 1) trr 50.0 ns Typical junction capacitance (NOTE 2) CJ Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=125°C 0.95 Typical thermal resistance (NOTE 3) Operating junction and storage temperature range 70.0 45.0 pF RΘJA RΘJL 40.0 15.0 °C/W TJ, TSTG -65 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient, and from junction to lead at 0.375” (9.5mm) lead length, P.C.B. mounted E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com EGP20A THRU EGP20G 50V-400V 2.0A GLASS PASSIVATED FAST EFFICIENT RECTIFIER RATINGS AND CHARACTERISTIC CURVES EGP20A THRU EGP20G 3.0 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 90 RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1 - MAXIMUM FORWARD CURRENT DERATING CURVE 2.0 1.0 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, °C TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 75 60 45 30 15 0 1 10 100 NUMBER OF CYCLES AT 60 Hz FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 50 PULSE WIDTH=300µs INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 1% DUTY CYCLE 10 TJ=150°C TJ=25°C 1 0.1 10 TJ=150°C TJ=125°C 1 0.1 TJ=75°C 0.01 EGP20A - EGP20D EGP20F & EGP20G 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 TJ=25°C 1.8 0.001 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, % JUNCTION CAPACITANCE, pF TJ=25°C f=1.0 MHz Vsig=50mVp-p 120 100 80 60 40 20 0 0.1 EGP20A - EGP20D EGP20F & EGP20G 10 1 100 1,000 TRANSIENT THERMAL IMPEDANCE, °CW FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 5 - TYPICAL JUNCTION CAPACITANCE 140 10 1 0.1 0.01 0.1 1 10 100 t, PULSE DURATION, sec. REVERSE VOLTAGE, VOLTS E-mail: [email protected] 100 2 of 2 Web Site: www.taychipst.com 140