TYSEMI FCX1151A

Transistors
IC
SMD Type
Product specification
FCX1151A
Features
2W power dissipation.
5A peak pulse current.
Excellent HFE characteristics up to 5 Amps.
Extremely low saturation voltage E.g. 60mv Typ.
Extremely low equivalent on-resistance.
RCE(sat) 66mÙ at 3A.
Absolute Maximum Ratings Ta = 25
Parameter
Symbol
Rating
Unit
Collector-base voltage
VCBO
-45
V
Collector-emitter voltage
VCEO
-40
V
Emitter-base voltage
VEBO
-5
V
Continuous collector current
ICM
-5
A
Peak pulse current *3
IC
-3
A
Base current
IB
-500
mA
1 *1
W
2 *2
W
Power dissipation
Operating and storage temperature range
Ptot
Tj,Tstg
-55 to +150
*1 recommended Ptot calculated using FR4 measuring 15X15X0.6mm
*2 Maximum power dissipation is calculated assuming that the device is mounted on FR4
substrate measuring 40X40X0.6mm
*3 Measured under pulsed conditions. Pulse width=300ìs. Duty cycle
http://www.twtysemi.com
[email protected]
2%
4008-318-123
1 of 2
Transistors
IC
SMD Type
Product specification
FCX1151A
Electrical Characteristics Ta = 25
Parameter
Symbol
Testconditons
Min
Typ
Max
Unit
Collector-base breakdown voltage
V(BR)CBO IC=-100ìA
-45
V
Collector-emitter breakdown voltage *
V(BR)CEO IC=-10mA
-40
V
Emitter-base breakdown voltage
V(BR)EBO IE=-100ìA
-5
V
Collector cut-off current
-0.3
-100
nA
ICBO
VCB=-36V
Collector Emitter Cut-Off Current
ICES
VCE=-32V
-0.3
-100
nA
Emitter Cut-Off Current
IEBO
VEB=-4V
-0.3
-100
nA
Collector-emitter saturation voltage *
IC=-0.1A, IB=-1mA
VCE(sat) IC=-0.5A, IB=-5mA
IC=-1A, IB=-20mA
IC=-3A, IB=-250mA
-60
-120
-140
-200
-90
-180
-220
-300
mV
Base-emitter saturation voltage *
VBE(sat) IC=-3A, IB=-250mA
-985 -1050
mV
Base-emitter ON voltage *
VBE(on) IC=-3A, VCE=-2V
-850
mV
Static Forward Current Transfer Ratio *
hFE
IC=-10mA,VCE=-2V
IC=-0.5A,VCE=-2V
IC=-2A,VCE=-2V
IC=-3A,VCE=-2V
IC=-5A,VCE=-2V
270
250
180
100
450
400
300
190
45
-950
800
IC=-50mA, VCE=-10V, f=50MHz
145
MHz
Cobo
VCB=-10V, f=1MHz
40
pF
Turn-on time
t(on)
IC=-2A, VCC=-30V
170
ns
Turn-off time
t(off)
IB1=IB2=-20mA
460
ns
Transitional frequency
fT
Output capacitance
* Pulse test: tp = 300 ìs; d
0.02.
Marking
Marking
151
http://www.twtysemi.com
[email protected]
4008-318-123
2 of 2