Product specification P6SMBJ8.5A ■ Features DO-214AA(SMB) ● For surface mounted applications in order to optimize board space. Unit: mm 4.12 3.92 4.699 4.064 2.108 1.905 ● Low profile package ● Built-in strain relief 3.937 3.302 1 2 ● Glass passivated junction 2.30 2.10 2.65 2.45 5.59 5.39 5.588 5.080 ● Excellent clamping capability ● Low inductance 2.348 2.108 0.305 0.152 0.203 0.051 1.270 0.762 Recommended Land Pattern ■ Absolute Maximum Ratings Ta = 25℃ Symbol Ratings Units Peak Power Dissipation at TA=25℃, TP=1ms (Note 1,2) Parameter PPPM Minimum 600 W Peak Forward Surge Current IFSM 100 A (Note 2,3) Peak Pulse Current Current on 10/1000μs waveform (Note 1) Operating and Storage Temperature Range IPPM See Table A Tj, TSTG -55 to +150 ℃ ■ Electrical Characteristics Ta = 25℃ Reverse Stand-off Voltage Part Number VRWM Breakdown Voltage VBR @ I Min. P6SMBJ8.5A Test Current Reverse Leakage Max. Clamp Voltage Peak Pulse Current IT I R @ VRWM VC @ IPP I PP T Max. V V V mA μA V A 8.5 9.44 10.82 1.0 10 14.4 41.7 NOTES: 1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25℃ per 2.Mounted on 5.0mm 2 ( .013mm thick) land areas. 3.Measured on 8.3ms , single half sine-wave or equivalent square wave , duty cycle= 4 pulses per minutes maximum. ■ Marking Marking KT http://www.twtysemi.com [email protected] 4008-318-123 1 of 2 Product specification P6SMBJ8.5A P PPM , PEAK PULSE POWER, kW 100 PEAK PULSE POWER (P PP ) OR CURRENT(I PP ) DERATING IN PERCENTAGE% ■ Typical Characteristics 100 Non-Repetitve Pulse Wavefom Shown in Flgure3 TA=25 C 10 1.0 Mounted on 5.0mm Copper Land Areas 0.1 0.1US 10US 1.0US 1.0ms 100US 10ms 75 50 25 0 0 t P ,PULSE WIDTH 25 50 75 100 125 150 175 200 TA , AMBIENT TEMPERATURE (℃ ) Figure 1,Peak Pulse Power Rating Curve Figure 2,Derating Curve 150 I PPM , PEAK PULSE CURRENT-% I FSM ,PEAK FORWARE SURGE CURRENT, AMPERES 200 tf=10u sec TA=25 C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of Ipp Peak Value Ippm 100 Half Value-Ipp 2 10/1000u sec Waveform as Defined bye R.E.A. 50 e-kt 100 50 10 1 td 0 T J =T J max 8.3ms Single Half Since-Wave JEDEC Method 0 1.0 2.0 5 10 50 100 4.0 3.0 t,TIME (ms) T L , LEAD TEMPERATURE, C Figure 3,Pulse Waveform Figure 4,Maximum Non-Repetitive Peak Foward Surge Current 6,000 Tj=25 C f=1.0MHZ Vsig=50mVp-p 4,000 2,000 CJ,CAPACITANCE,pF Measured at Zero Bias 1,000 800 600 400 Measured at Stand-Off Voltahe(V MW ) 200 100 80 60 40 20 10 1.0 2.0 5.0 10 20 50 100 200 V( BR ), BREAKDOWN VOLTAGE, VOLTS Figure 5,Typical Capacitance http://www.twtysemi.com [email protected] 4008-318-123 2 of 2