LED LAMP VAOL-10GCE4 Feature § § § Package Dimension Low Power Consumption High Intensity I.C. compatible Applications § § § § Commercial Outdoor Sign Board Front Panel Indicator Dot-Matrix Module LED Bulb Description § § § These High Intensity LEDs are Based on GaAsP/GaP Material Technology Emitted color:Yellow Water Transparent Lens ＊Tolerance：± 0.01 0.25 Unit：± inch mm Absolute Maximum Ratings at Ta＝25℃ Symbol Parameter Max. Unit 100 mW PD Power Dissipation VR Reverse Voltage 5 V IAF Average Forward Current 25 mA IPF Peak Forward Current（Duty＝0.1，1kHz） 85 mA ― Derating Linear Form 25℃ 0.4 mA∕℃ Topr Operating Temperature Range –40 to ＋ 80 ℃ Tstg Storage Temperature Range –40 to ＋ 100 ℃ Lead Soldering Temperature [1.6mm（0.063inch）From Body] 260℃ For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta＝25℃ Symbol Parameter VF Forward Voltage IR Reverse Current △θ IV Half Intensity Angle Luminous Intensity Test Condition IF＝ 20 mA Min. Typ. Max. Unit 2.0 2.4 V 100 μA VR＝ 5 V IF＝ 20 mA 30 Deg. IF＝ 20 mA 200 mcd. λp Peak Wavelength IF＝ 20 mA 593 nm λd Dominant Wavelength IF＝ 20 mA 590 nm Electrical Characteristics at Ta＝25℃ Symbol Iv VF λD Parameter Luminous Intensity Forward Voltage Dominant Wavelength Condition IF＝20mA IF＝20mA IF＝20mA Unit mcd V nm Grade Binning Range Grade Range Grade Range B 1.8~1.9 Y3 589~591 C 1.9~2.0 Y4 591~593 D 2.0~2.1 Y5 593~595 E 2.1~2.2 F 2.2~2.3 G 2.3~2.4 Intensity: Tolerance of minimum and maximum = ± 15% Vf: Tolerance of minimum and maximum = ± 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. 2. Specific binning requirements –please contact our home office Radiation Diagram IF=20 mA 50% Power Angle Angle =30∘ YELLOW Y: Yellow (GaAsP/GaP) Typical Electro-optical Characteristic Curves (25°C Free Air Temperature Unless O therwise Specified) λ