LED LAMP VAOL-5701CE4 Feature § § Package Dimension Low Power Consumption I.C. compatible Applications § § Dot-Matrix Module LED Bulb Description § § § These LEDs are Based on GaAsP/GaP Material Technology Emitted color:Yellow Water Transparent Lens ＊Tolerance：± 0.01 0.25 Unit：± inch mm Absolute Maximum Ratings at Ta＝25℃ Symbol Parameter Max. Unit 120 mW PD Power Dissipation VR Reverse Voltage 5 V IAF Average Forward Current 30 mA IPF Peak Forward Current（Duty＝0.1，1kHz） 100 mA ― Derating Linear Form 25℃ 0.4 mA∕℃ Topr Operating Temperature Range –40 to ＋ 85 ℃ Tstg Storage Temperature Range –40 to ＋ 100 ℃ Lead Soldering Temperature [1.6mm（0.063inch）From Body] 260℃ For 5 Seconds. Electrical / Optical Characteristics and Curves at Ta＝25℃ Symbol Parameter Test Condition VF Forward Voltage IF＝ 20 mA IR Reverse Current VR＝ 5 △θ Half Intensity Angle IF＝ 20 mA 100 Deg. IV Luminous Intensity IF＝ 20 mA 80 mcd. λd Dominant Wavelength IF＝ 20 mA 590 nm Min. Typ. 2.2 V Max. Unit 2.4 V 100 μA Electrical Characteristics at Ta＝25℃ Symbol Paramet er Conditi on Unit Iv VF λD Luminous Intensity Forward Voltage Dominant Wavelength IF＝20mA IF＝20mA IF＝20mA mcd V nm Grade Binning Range Grade Range Grade Range C 1.9~2.0 Y3 587~589 D 2.0~2.1 Y4 589~591 E 2.1~2.2 Y5 591~593 F 2.2~2.3 G 2.3~2.4 Intensity: Tolerance of minimum and maximum = ± 15% Vf: Tolerance of minimum and maximum = ± 0.05v NOTE: 1. Static electricity and surge damages the LED. It is recommend to use a anti-static wrist band or anti-electrostatic glove when handing the LEDs. All devices, equipment and machinery must be properly grounded. 2. Specific binning requirements –please contact our home office Radiation Diagram IF=20 mA 50% Power Angle Angle =100∘ YELLOW Typical Electro-optical Characteristic Curves (25°C Free Air Temperature Unless Otherwise Specified) λ