1A1 WILLAS THRU SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere Pb Free Product FEATURES * Extremely Low VF * Extremely thin package * Low stored charge R-1 * Majority carrier conduction .100 (2.55) High reliability Low leakage Low forward voltage drop High current capability .112 (2.85) FEATURES * * * * 0.1AM 1A7 MECHANICAL DATA * * * * * Case: Molded plastic black body Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.19 gram .059 (1 MECHANICAL DATA * Pb free plating .043 (1 * Case:Molded plastic, JEDEC SOD-323(SC-76) * Terminal : Solder plated, solderable per MIL-STD-750, Method 2026 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS * Polarity : Indicated by cathode band Ratings at 25 o C ambient temperature unless otherwise specified. * Mounting Position : Any Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. * Weight : 0.000159 ounce, 0.0045 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 25 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range SYMBOL 1A1 1A2 1A3 1A4 1A5 1A6 1A7 UNITS VRRM 50 100 200 400 600 800 1000 Volts VRMS 35 50 70 100 140 200 280 400 420 600 560 800 700 1000 Volts MAXIMUM RATING AND ELECTRICAL C VDC o Amps I FSM 25 For capacitive load, derate current by 20% Amps CJ Maximum Full Load Reverse Current Full Cycle Average .375” (9.5mm) lead length at T L = 75oC 15 R θJA pF 0 60 Parameter T J , T STG Repetitive Peak Reverse Voltage Continuous ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC @T A = 25 o C Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 100 o C Volts Rating 25 C ambient temperature unless otherwise specified. IO 1.0 Single phase half wave, 60Hz, resistive of inductive load. C/ W Conditions 0 -65 to + 150 C Reverse Voltage SYMBOL 1A1 F Forward VVoltage 1A2 IR Reverse Current 1A3 1A4I = 1A5 1A6 10mA DC F 1.1 5.0 I F = 100mA DC 50 VR = 10V DC 100 1A7 UNITS Volts uAmps uAmps Mean Rectifying Current NOTES : Measured at 1 MHZ and applied reverse voltage of 4.0 volts Peak forward surge current Capacitance between terminals Operating Temperature Storage Temperature Back WILLAS ELECTRONIC CORP.