V965ME07-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • High Speed Digital Clocks • Microwave Radios • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 6834 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -80 Harmonic Suppression (2nd) -20 Tuning Voltage 0 Tuning Sensitivity (avg.) Power Output Max Units 6835 MHz dBc/Hz -15 dBc 2.8 Vdc MHz/V 140 -4 3 dBm Input Capacitance 20 pF Pushing 10 MHz/V Pulling (12 dB Return Loss, Any Phase) 25 MHz 70 °C Max Units Load Impedance Operating Temperature Range 50 0 Package Style Power Supply Requirements -.5 MINI-16HL-SM Min Typ Supply Voltage (Vcc, nom.) 4.5 Supply Current (Icc) 24 Vdc 30 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B Voltage-Controlled Oscillator Surface Mount Module V965ME07-LF Rev A1 Tuning Curve, typ. 6950 FREQUENCY (MHz) 6900 6850 6800 70 °C 25 °C 0 °C 6750 6700 6650 6600 6550 6500 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint 5 RECOMMENDED FOOTPRINT 4 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 3 2 1 0 -1 -2 -3 0.030 MIN. CUTBACK FROM LIVE PADS -4 -5 -6 -7 -8 6542 6574 6609 6636 6662 6687 6712 6740 6765 6789 6812 6841 6869 6895 6921 FREQUENCY (MHz) 70 °C 25 °C 0 °C Physical Dimensions SOLDER MASK GOLD PLATED PADS PIN CONFIGURATION BOTTOM Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B