UTS Series Contact selector guide Available platings Electrical characteristics: contact resistance Machined < 6mΩ A 2μ Ni + 2μ Ag Stamped & formed < 15mΩ J Gold flash over 2μ Ni Machined < 3mΩ K Min 0.4μ gold over 2μ Ni Stamped & formed < 6mΩ S31 Gold flash over Ni #12 Ø2.4mm Machined < 5mΩ S18 0.75μ gold min in active part over 2μ Ni Gold flash over Ni #8 Ø3.6mm Machined < 5mΩ S25 S26 Active part: 0.75μ Au over Ni Crimp area: flash Au over Ni T T: 2μm Ni mini all over + 3 to 5 μm Sn all over TK6 2-5μ Sn pre-plated #20 Ø1mm #16 Ø1.6mm Packaging Conscious of the wide variety of applications, contact packaging has been considered for small series (bulk packaging) and high volume production (reeled contacts): • 50 pieces bulk packing (standard) • 1000 pieces bulk packing • 3000 pieces reeled stamped & formed contacts 42 • 5000 pieces reeled machined contacts UTS Series Crimp contacts Standard version #20 Ø1 mm #16 Ø1.6 mm Type Part number AWG mm² Male Machined 26-24 0.13-0.20 S&F 26-24 0.13-0.25 Machined 22-20 0.32-0.52 S&F 22-20 0.35-0.5 Machined Machined Machined 20-18 30-28 26-24 0.50-0.93 0.05-0.08 0.13-0.2 S&F 26-24 0.13-0.25 Machined 22-20 0.32-0.52 S&F 22-20 0.35-0.5 Machined 20-16 0.52-1.5 S&F 18-16 0.8-1.5 S&F 18-16 0.8-1.5 Machined Machined 16-14 16-14 1.5-2.5 1.5-2.5 S&F 14 2.0 22 20 18 16 14 12 16 14 12 10 8 0.13-0.4 0.5 0.75-1.0 1.5 2.5 4 1.5 2.5 4 6.0 10.0 RM24W3SM24W3S26 (1) SM24WL3S26 (2) RM20W3SM20W3S26 (1) SM20WL3S26 (2) RM18W3RM28M1RM24M9SM24M1- (1) SM24ML1- (2) RM20M13RM20M12SM20M1- (1) SM20ML1- (2) RM16M23SM16M1- (1) SM16ML1- (2) SM16M11- (1) SM16ML11- (2) RM14M50RM14M30SM14M1- (1) SM14ML1- (2) 8291 1457N8291 1459N8291 1461N8291 1463N8291 1465N8291 1467N8291 36018291 36038291 36058291 36078291 3609- #12 Ø2.4 mm Machined #8 Ø3.6 mm Machined Female Max wire Ø RC24W3SC24W3S25 (1) SC24WL3S25 (2) RC20W3SC20W3S25 (1) SC20WL3S25 (2) RC18W3RC28M10.55 RC24M90.8 SC24M1- (1) 0.89-1.28 SC24ML1- (2) RC20M131.18 RC20M12SC20M1- (1) 1.17-2.08 SC20ML1- (2) RC16M231.8 SC16M1- (1) 3.0 SC16ML1- (2) SC16M11- (1) 2.0-3.0 SC16ML11- (2) RC14M502.05 RC14M302.28 SC14M1- (1) 3.2 SC14ML1- (2) 8291 14568291 14588291 14608291 14628291 14648291 14668291 36008291 36028291 36048291 36068291 3608- (1) contact reeled (2) loose contact 43 Max insulator Ø 1.58 max 0.89-1.58 1.58 max 1.17-2.08 2.10 max 1.1 1.6 1.8 2.2 3.2 3.2 3.2 Color band Plating available Front Rear Red - - - S31, S18, TK6 Black Blue - K, J, T - - S31, S18, TK6 - - K, J, T - - S31, S18, TK6 - - S31, S18, TK6 - - K, J, T K, J, T - - S31, S18, TK6 K S25, S26 K S25, S26 K K, J, T K, J, T 4.9 - A, K 6.5 - A Contacts Wire size Contact size UTS Series Crimp contacts First Mate Last Break contacts Contact size Type #16 Ø1.6 mm Longer male contact (+1mm) Machined 22-20 20-16 16-14 16-14 30-28 26-24 #16 Ø1.6 mm Shorter female contact (-0.7mm) Wire size AWG mm² 30-28 0.05-0.08 26-24 0.13-0.2 Machined 22-20 20-16 16-14 16-14 Part number Male Female RM28M1GE1□ RM24M9GE1□ RM20M13GE1□ 0.32-0.52 RM20M12 GE1□ 0.52-1.5 RM16M23 GE1□ 1.5-2.5 RM14M50 GE1□ 1.5-2.5 RM14M30 GE1□ 0.05-0.08 RC28M1GE7□ 0.13-0.2 RC24M9GE7□ RC20M13GE7□ 0.32-0.52 RC20M12GE7□ 0.52-1.5 RC16M23GE7□ 1.5-2.5 RC14M50GE7□ 1.5-2.5 RC14M30GE7□ Max wire Ø Max insulator Ø 0.55 0.8 1.1 1.6 1.8 2.2 3.2 1.1 1.6 1.8 2.2 3.2 - 1.18 1.8 2.05 2.28 0.55 0.8 1.18 1.8 2.05 2.28 Color band Front Rear Red Red Red Black Red Blue Red Red Red Red Blue Red Blue Black Blue Blue Blue Blue Blue Blue Plating available □= K, J or T □= K, J or T How to make FMLB / LMFB connection Contact 1 Contact 2 Standard male contact Shorter female contact Longer male contact Standard male contact Standard female contact Standard female contact First Mate Last Break contacts should be chosen only if the cavity is not marked with the earth symbol. For cavities marked with the earth symbol, standard contacts will fulfill the same role as a first mate, last break contact used in a standard cavity. FMLB Ground symbol LMFB 44 UTS Series Coaxial contacts Coaxial contact range We provide 2 types of coaxial contacts suitable for 50 or 75Ω, coaxial cable or twisted pair cable. Monocrimp coaxial contact • The monocrimp one-piece coaxial contacts offer high reliability plus the economic advantage of a 95% reduction in installation time over conventional assembly methods. • This economy is achieved by simultaneously crimping both the inner conductor and outer braid or drain wire. Multipiece crimp coaxial contact • The inner conductor and outer braid is crimped individually. • The thermoplastic insulating bushing in the outer body is designed to accept and permanently retain the inner contact. • An outer ferrule is used to connect the braid to the outer contact and provide cable support to ensure against bending and vibration. • For jacket diameter from 0.64 to 1.45mm Inner conductor from AWG30 to AWG24 • For jacket diameter from 1.78 to 3.05mm Inner conductor up to 2.44mm diameter Contacts for coaxial cable summary Contact range Contact type Male contact Contact part number with cable combination Female contact Multipiece RMDXK10D28 RCDXK1D28 Monocrimp RMDX60xxD28 RCDX60xxD28 See page 68 Cabling notice See pages 72 & 73 See page 74 Contacts for twisted pairs cable summary Contact range Male contact Female contact Contact part number with cable combination Multipiece RMDXK10D28 + YORK090 RCDXK1D28 + YORK090 See page 69 Monocrimp RMDX60xxD28 RCDX60xxD28 Contact type Cabling notice See page 70 See page 71 45 Contacts Suitable for Coaxial cable or Twisted cable UTS Series PCB contacts PCB contacts PCB soldering UTS range can be carried out with a wave soldering process, but not reflow soldering process. All high temperature processes are prohibited. Contact size Type #20 Ø1mm #16 Ø1.6mm Part number Male Female Short version RMW50A7□ RCW50A7□ Long version RMW5016□ RCW5016□ Short version RM20M12E8□ Long version Plating □=K RC20M12E8□ RC20M12E83□ RM20M12E83□ RC20M12E84□ 46 □ = K or T UTS Series Fibre optic contacts Description Size 16 Fibre optic contacts for TRIM TRIO® connectors Size 16 Fibre optic contacts are optical contacts designed for the integration of optical links in all TRIM TRIO® cable connectors. The Fibre optic contacts are designed to accommodate: • Plastic Optical Fibre (POF) 1 mm core and 2.2 mm jacket • Plastic Clad Fibre (PCF) 230µm core and 2.2 mm jacket • Multimode Silica Fibre 62.5/125µm type 2.0 mm max. jacket • Singlemode Silica Fibre 9/125µm type 2.0 mm jacket Typical features and benefits are: • Socket contact is spring loaded to avoid any air gap between the two optical faces. • Low insertion loss is provided by high precision pieces. Technical characteristics Performance • Fibre type: POF/PCF • Wave length: 650 nm • Optical insertion loss (typ.): 2 dB max. 2.2mm • Jacketed external diameter: • Temperature range: -25°C to +70°C 49N • Cable retention: • Mating cycles without cleaning: 50 • Max. mating cycles: 500 Construction • Contact body: Multimode 62.5/125µm 1300 nm < 0.5 dB 2.0mm max. -25°C to +70°C Singlemode 9/125µm 1310 nm < 0.35 dB 2.0mm max. -25°C to +70°C Copper alloy Connector accommodation Any TRIM TRIO® size 16 contact can be used in any contact position in any connector in the TRIM TRIO® size 16 interconnection system : UTP, UTS, UTG, UTO. 47 Contacts • Single jumpers, multiway harness and active device housings can be supplied regarding customer requirement. UTS Series Fibre optic contacts Ordering information POF Contacts (Plastic Optical Fibre) Male contact RMPOF1000 Female contact RCPOF1000B Silica Contacts - Multimode Male contact RMMMOFA Female contact RCMMOFA PCF Contacts (Plastic Clad Fibre) Male contact RMPCF230 Female contact RCPCF230B Silica Contacts - Monomode Male contact RMSMOFA Female contact RCSMOFA POF Contact (Plastic Optical Fibre) SPECIFIC TOOLING LIST - can be ordered only separately STANDARD TOOLING KIT - P/N 80MS0004 The standard tooling kit is made of the part numbers below that can be ordered separately as well. Part numbers Descriptions Part numbers Descriptions 80WD0005 Stripping tool 80WG0010 Needle 80WD0025 Automatic stripping tool for Ø 0.5 mm, 0.6 mm, 0.7 mm & 3.8 mm 80WG0015 Capsule 80WM0006 Ruler 80WP0005 Polishing plate 80WP0013 Non slip base (to hold the polishing plate) 80WP0014 Polishing disk (grain size 9µm) 80WP0018 Polishing tool 80WP0019 Polishing disk (grain size 30µm) 80WS0002 Crimping plier 80WG0016 Syringe 80WN0005 Dry air spray 80WN0006 Optical paper 80WN0012 Dropping bottle 80WN0008 Wiping solvent PCF Contact (Plastic Clad Fibre) STANDARD TOOLING KIT - P/N 80MG0039 Descriptions Descriptions Stripping tool for Ø 2.2 mm Polishing disk (grain size 9µm) Kevlar scissors Polishing disk (grain size 0.3µm) Stripping tool for Ø 0.25 mm Curing oven Alumina blade Polishing plate Polishing tool Non slip base (to hold the polishing plate) Press fit tool Glue Microscope 48 UTS Series Fibre optic contacts Multimode Contact - Silica STANDARD TOOLING KIT - P/N 80MG0027 SPECIFIC TOOLING LIST - can be ordered only separately The standard tooling kit is made of the part numbers below that can be ordered separately as well. Part numbers Part numbers Descriptions Descriptions 80WC0001 Aramid yarn scissors 80WD0036 Stripping tool for Ø 0.9 mm & 0.25 mm 80WC0003 Cutter 80WD0005 Stripping tool for Ø 2.2 mm & 1.5 mm 80WC0004 Alumina blade 80WL0001 Microscope x400 80WD0008 Stripping tool for Ø 0.20 mm 80WL0008 Microscope adaptor 80WD0010 Stripping tool for Ø 0.25 mm 80WP0025 Polishing tool 80WD0014 Stripping tool for Ø 0.60 mm 80WS0002 Crimping tool 80WD0025 Automatic stripping tool for Ø 0.5 mm, 0.6 mm, 0.7 mm & 3.8 mm 80WT0005 Contact support for polymerisation 80WG0010 Needle 80WM0006 Ruler 80WP0005 Polishing plate 80WP0013 Non slip base (to hold the polishing plate) 80WT0009 Curing oven Protective tube Glue Capsule 80WG0016 Syringe 80WN0005 Dry air spray 80WN0006 Optical paper 80WN0012 Dropping bottle 80WP0014 Polishing disk (grain size 9µm) 80WP0015 Polishing disk (grain size 0.3µm) Contacts 80WT0008 80WG0014 80WG0015 49