AK682048D 2,097,152 x 8 Bit CMOS Static Random Access Memory ACCUTEK MICROCIRCUIT CORPORATION DESCRIPTION The Accutek AK682048D high density memory module is a static random access memory organized in 2 Meg x 8 bit words. The assembly consists of one medium speed 2 Meg x 8 SRAM in a Type 1 TSOP package. The module is supplied in a 600 mil wide, 36 pin DIP (Dual In-Line Package) configuration. This pinout is completely compatible with industry standard monolithic designs. These modules are intended for use in applications where limited board space dictates compact module designs. The operation of the AK682048D is identical to standard monolithic 8 bit word wide SRAMs. The AK682048D offers the features of low power and medium speed by using CMOS devices and makes high density mounting possible with no surface mount technology. FEATURES • 2,097,152 x 8 bit organization ELECTRICAL SPECIFICATIONS • Fast access time: 45 - 70 nSEC • Completely static RAM, no clock or timing strobe required • Inputs and outputs TTL compatible • Conventional 600 mil wide SIP package with industry compatible pinout Timing diagrams and basic electrical characteristics are those of the standard 2048 Meg x 8 SRAMs used to construct these modules. Accutek’s module design allows the flexibility of selecting industry-compatible 2048 Meg x 8 SRAMs from any of a number of semiconductor manufacturers. • Single 5 volt power supply - AK682048D • Single 3.3 volt power supply - AK682048D/3.3 • Operating free air temperature 00 to 700C PIN NOMENCLATURE DQ1 - DQ8 Data In/Data Out A0 - A20 Adress Inputs CE1 Chip Enable 1 CE2 Chip Enable 2 WE Write Enable Vcc 5v Supply Vss Ground OE Output Enable TIMING OPTIONS 55 nSEC Access Time 70 nSEC Access Time PIN ASSIGNMENT FUNCTIONAL DIAGRAM MECHANICAL DIMENSIONS ORDERING INFORMATION PART NUMBER CODING INTERPRETATION Position 1 2 3 4 5 6 7 8 1 2 3 4 5 6 Inches 7 8 Product AK = Accutek Memory Type 4 = Dynamic RAM 5 = CMOS Dynamic RAM 6 = Static RAM Organization/Word Width 1 = by 1 16 = by 16 4 = by 4 32 = by 32 8 = by 8 36 = by 36 9 = by 9 Size/Bits Depth 32 = 32K 1024 = 1 MEG 64 = 64K 4096 = 4 MEG 128 = 128K 8192 = 8 MEG 256 = 256K 16384 = 16 MEG 512 = 512K Package Type G = Single In-Line Package (SIP) S = Single In-Line Module (SIM) D = Dual In-Line Package (DIP) W = .050 inch Pitch Edge Connect Z = Zig-Zag In-Line Package (ZIP) Special Designation P = Page Mode N = Nibble Mode K = Static Column Mode W = Write Per Bit Mode V = Video Ram Separator - = Commercial 00C to +700C M = Military Equivalent Screened (-550C to +1250C) I = Industrial Temperature Tested (-450C to +850C) X = Burned In Speed (first two significant digits) DRAMS SRAMS 50 = 50 nS 8 = 8 nS 60 = 60 nS 12 = 12 nS 70 = 70 nS 55 = 55 nS 80 = 80 nS 70 = 70 nS The numbers and coding on this page do not include all variations available but are show as examples of the most widely used variations. Contact Accutek if other information is required. EXAMPLES: AK682048D-70 2048 x 8, 70 nSEC SRAM Module, DIP Configuration ACCUTEK MICROCIRCUIT CORPORATION 5 NEW PASTURE ROAD NEWBURYPORT, MA 01950-4040 PHONE: 978-465-6200 FAX: 978-462-3396 Email: [email protected] Internet: www.accutekmicro.com Accutek reserves the right to make changes in specifications at any time and without notice. Accutek does not assume any responsibility for the use of any circuitry described; no circuit patent licenses are implied. Preliminary data sheets contain minimum and maximum limits based upon design objectives, which are subject to change upon full characterization over the specific operating conditions.