Series X518 Single and Dual Row Collet Sockets with Solder Tail Pins FEATURES: • Aries collet sockets are available in single or dual rows. • Cuttable to the number of pins desired to fit the application. • Side-to-side and end-to-end stackable. SPECIFICATIONS: • Body material is black UL 94V-0 Glass-filled 4/6 Nylon. • Pin body is Brass Alloy 360 1/2 hard per UNS C36000 ASTM-B16-00. • Pin body plating is either 10 μ [.25μm] min. Gold per MIL-G-45204 or 200μ [5.08μm] min. 93/7 Tin/Lead per ASTM B545 or 200μ [5.08μm] min. Tin per ASTM B545 Type 1 over 100μ [2.54μm] min. Nickel per SAE-AMS-QQ-N-290. • 4-fingered collet contact is Beryllium Copper Alloy per UNS C17200 ASTM-B194-01. • Contact plating is either 200 μ [5.08μm] min. 93/7 Tin/Lead per ASTM B545 or 200μ [5.08μm] min Tin per ASTM B545 Type 1 or 10μ [.25μm] Gold per MIL-G-45204 over 50 μ min. [1.27μm] Nickel per SAE-AMSNote: Aries specializes in custom design and production. In addition to QQ-N-290. Heavy 30μ [.76μm] Gold Plating also available. the standard products shown on this page, special materials, platings, • Contact current rating=3 Amps. sizes, and configurations can be furnished, depending on quantities. • Insertion Force=180 grams/pin; Withdrawal Force=90 grams/pin; Normal Aries reserves the right to change product specifications without notice. Force=140 grams/pin; based on a .018 [.46] dia. test lead. ORDERING INFORMATION • Operating temperature=221°F [105°C] Tin & Tin/Lead plating =257°F [125°C] Gold plating. XX-X518-1XXXX • Insertion Force=180 grams/pin; Withdrawal Force=90 grams/pin; Normal Optional suffix: No. of pins: Force=140 grams/pin; based on a .018 [.46] dia. test lead. H=Heavy Gold Single row: 1-40 pins • Accepts leads .015-.025 [.38-.64] in diameter. plating on collet Dual row: 2-40 pins • Accepts lead lengths from .100 [2.54] min. T=Tin collet/ Tin MOUNTING CONSIDERATIONS: 0=Single row shell •Suggested PCB hole size=.030 ± .002 [.76 ± .05] dia. 1=Dual row ALL DIMENSIONS: INCHES [MILLIMETERS] All tolerances ± .005 [.13] unless otherwise specified “A”=(NO. OF PINS PER ROW) X .100 [2.54] “B”=(NO. OF PINS PER ROW - 1) X .100 [2.54] TL=Tin/Lead collet/ Tin/Lead shell E=Extra long solder tail pin Series Solder tail pin Consult Data Sheet No. 12021 for Series X518 Collet Sockets with wire wrap pins. SOLDER TAIL Bristol, PA USA TEL: (215) 781-9956 FAX: (215) 781-9845 Plating: 0=Gold collet/Tin shell 0TL=Gold collet/ Tin/Lead Shell 1=Gold collet/Gold shell EXTRA LONG “E” abc 12020 http://www.arieselec.com • [email protected] REV. G PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED