ARJ45® Category 7a Connectors RoHS Compliant Features & Benefits • Meets IEC 60603-7-71 standard for Category 7a performance up to 1000 MHz • Meets IEC 60603-7-7 standard for Category 7 performance up to 600 MHz • Performance capability up to 3GHz • Meets the industry standard mechanical interface as defined by IEC 61076-3-110 • Interface compatible with the Nexans' GG45 connectors • Right angle PCB jack available for Category 7a patch panel designs and high speed active equipment applications • Uses data transmission pair isolation techniques to achieve high frequency performance • Plug design includes a built-in strain relief boot as well as an anti-snag feature for plug tab protection The ARJ45® is Bel Stewart’s family of connectors for Category 7 and Category 7a premise wiring systems deployed in 10GBase-T Ethernet and higher speed data transmission environments. This connector family consists of a cable-mounted plug and a single-port, PCB-mounted jack designed to meet Category 7a performance standards up to 1000 MHz as defined by the IEC60603-7-71. Additionally, the ARJ45® can be used as a high speed connector replacement for closed loop applications currently using less economical connector types. Bel Stewart’s ARJ45® connector systems provide a competitive advantage in that they are built on the proven reliability of standard RJ45 interface mechanics which have been enhanced to support increased Category 7a data speeds. In addition, the ARJ45® connectors are interfacecompatible with the Nexans' GG45 connector system. This makes the ARJ45® / GG45 connector system a proven intermatable connector solution for Category 7 and Category 7a that is commercially available today from two independent manufacturing sources. ARJ45® Jack Part Number Description SS-77100-004 Single port, horizontal, and shielded ARJ45® Cable Assemblies Part Number Description CA77-010M0-2 10 meter cable assembly CA77-007M0-2 7 meter cable assembly CA77-005M0-2 5 meter cable assembly CA77-003M0-2 3 meter cable assembly CA77-002M0-2 2 meter cable assembly CA77-001M0-2 1 meter cable assembly 11118 Susquehanna Trail South Glen Rock, PA 17327 Tel: 717.235.7512 Fax: 717.235.4675 Document number US/LIT-ARJ45v02.13 @2013 Bel connector Inc. Specification Subject To Change ARJ45® Category 7a Connectors RoHS Compliant Typical Mechanical Dimensions of ARJ45® PCB Jacks Front View ARJ45® Category 7a Application Performance Data ARJ45 Category 7a 7a Return Loss ARJ45 Category Return Loss Side View 0.0 0.530 [13.46] 0.055 ±0.020 [1.40 ±0.51] 0.055 ±0.020 [1.40 ±0.51] -10.0 -15.0 -20.0 -25.0 0.125 signal and [3.17] LED leads Return Loss (dB) 0.600 [15.24] -5.0 -30.0 -35.0 -40.0 -45.0 -50.0 -55.0 -60.0 -65.0 0.290 [7.37] 0.560 [14.22] 0.678 [17.23] -70.0 -75.0 0.155 [3.94] ground leads -80.0 1 45 .170 [4.32] .145 [3.68] .120 [3.05] .340 [8.64] 8 2 x .040 [1.02] .140 [3.56] .308 [7.81] 1 Limit -60.0 3 x ø.062 [ø1.57] 6 7 78 -50.0 8 x ø.035 [ø0.89] -70.0 ø.006 [ø0.15] 3 5 36 1000 ARJ45 Category 7a Mated NEXT ø.006 [ø0.15] 4 12 100 ARJ45 Category 7a Mated NEXT .110 [2.79] max 2 Front edge of PCB .240 [6.10] .615 [15.62] PCB Recommended Hole Layout Seen From Component Side -80.0 NEXT (dB) .215 [5.46] .265 [6.73] PCB Recommended Hole Layout 2 x .050 [1.27] (MHz) 10 -90.0 -100.0 -110.0 -120.0 -130.0 1 10 45-12 45-36 100 Frequency MHz 45-78 12-36 12-78 1000 36-78 LIMIT All centerline dimensions are basic. 11118 Susquehanna Trail South Glen Rock, PA 17327 Tel: 717.235.7512 Fax: 717.235.4675 Document number US/LIT-ARJ45v02.13 @2013 Bel connector Inc. Specification Subject To Change