ETC 95-050-40

UniCam® Standard-Performance Connector,
SC
50 µm multimode (OM2)
133
Corning Cable Systems UniCam® Multimode Standard­Performance Connectors offer optical performance in a
fast, easy field­-termination solution ideal for fiber­-to­-the­workstation applications where setup and teardown time
is critical. The high­-precision mechanical splice technology enables fiber optic networks to be installed quickly
and cost effectively. The lightweight, handheld installation
tool and the high­-performance cleaver virtually eliminate
human variability from installation, ensuring terminations
are right the first time, every time. This kit was designed
with consideration for network installers, from the cleaver,
with its integrated fiber scrap bin and dual­-clamp precision hold, to the installation tool, with its immediate go/no­
-go feedback signal. Installation is as easy as strip, clean,
cleave, cam and crimp, with exceptional optical performance guaranteed. Every UniCam Connector is guaranteed to meet the published specification at the time of
installation or Corning Cable Systems will replace it.
Corning
Cable
Part Number: 95-050-40
Features and Benefits
Factory-polished end face
Consistent optical performance
Fast termination and no consumables
Low installation cost
Minimum insertion loss
Optimum optical performance
Standards
1
1
Approval and Listings
Compliant with EIA/TIA
568-B.3
Intermateability
Connectors are FOCIS
compliant with TIA/EIA 6043 and IEC61754-4
22.88
115
0
Product Specification 95-050-40_NAFTA_AEN
Page 1 | Revision date 2012-07-15
UniCam® Standard-Performance Connector,
SC
50 µm multimode (OM2)
Specifications
General Specifications
Product Type
Field-Installable Connectors
Technology
No-Epoxy/No-Polish
Keyed
No
Corning Logo
Yes
Packaging
Single Pack
Fiber Category
50 µm MM (OM2)
Temperature Range
Operation
0 °C to 60 °C, meets TIA/EIA 568-B.3 (32 °F to 140 °F, meets
TIA/EIA 568-B.3)
Chemical Characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Ordering Information
Part Number
95-050-40
Product Description
UniCam® Standard-Performance Connector, SC, 50 µm multimode (OM2), ceramic ferrule, logo, single pack, black housing, black boot
Shipping Information
Units per Delivery
1/1
Package Contents
Connector, shroud, crimp band, boot (900 µm), boot (3.0 mm)
Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/cablesystems
A complete listing of the trademarks of Corning Cable Systems is available at www.corning.com/cablesystems/trademarks.
Corning Cable Systems is ISO 9001 certified. © 2012 Corning Cable Systems. All rights reserved.
Product Specification 95-050-40_NAFTA_AEN
Page 2 | Revision date 2012-07-15