MICROCIRCUIT DATA SHEET Original Creation Date: 07/01/96 Last Update Date: 03/31/97 Last Major Revision Date: 07/01/96 MN54AC258-X REV 1B0 Quad 2 Input Multiplexer With TRI - STATE Outputs General Description The AC258 is a quad 2-input multiplexer with 3-state outputs. Four bits of data from two sources can be selected using a Common Data Select Input. The four outputs present the selected data in the complement (inverted) form. The outputs may be switched to a high impedance state with a logic HIGH on the common Output Enable (OE) input, allowing the outputs to interface directly with bus-oriented systems. Industry Part Number NS Part Numbers 54AC258 54AC258DMQB 54AC258FMQB 54AC258LMQB Prime Die Z258 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MN54AC258-X REV 1B0 Features - Icc and Ioz reduced by 50% Multiplexer expansion by tying outputs together Inverting TRI-STATE outputs Outputs source/sink 24 mA Standard Military Drawing (SMD) - AC258: 5962-91604 2 MICROCIRCUIT DATA SHEET MN54AC258-X REV 1B0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Vi = Vi = DC Input Diode Current (Iik) -0.5V Vcc +0.5V VOltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Source or Sink Current (Io) +50 mA DC Vcc or Ground Current Per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to 150 C Junction Temperature (Tj) CDIP Note 1: 175 C Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specification should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 2.0V to 6.0V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature (Ta) -55 C to +125 C Minimum Input Edge Rate (Delta V/Delta t) AC Devices Vin from 30% to 70% of Vcc Vcc @ 3.0V, 4.5V, 5.5V 125 mV/ns 3 MICROCIRCUIT DATA SHEET MN54AC258-X REV 1B0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 3.0V to 5.5V, Temperature Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL IIH IIL VOL PARAMETER High Level Input Current Low Level Input Current Low level output voltage CONDITIONS NOTES VCC=5.5V, VM=5.5V, VINL=0.0V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUTS 0.1 uA 1 1, 2 INPUTS 1.0 uA 2, 3 1, 2 INPUTS -0.1 uA 1 1, 2 INPUTS -1.0 uA 2, 3 1, 2 OUTPUTS .36 V 1 1, 2 OUTPUTS .50 V 2, 3 VCC=3.0V, VIH=2.1V, VIL=0.9V, IOL=50.0uA 1, 2 OUTPUTS .10 V 1, 2, 3 VCC=4.5V, VIH=3.15V, VIL=1.35V, IOL=50.0uA 1, 2 OUTPUTS .10 V 1, 2, 3 VCC=5.5V, VIH=3.85V, VIL=1.65V, IOL=24.0mA 1, 2 OUTPUTS .36 V 1 1, 2 OUTPUTS .50 V 2, 3 VCC=5.5V, VIH=3.85V, VIL=1.65V, IOL=50.0uA 1, 2 OUTPUTS .10 V 1, 2, 3 VCC=4.5V, VIH=3.15V, VIL=1.35V, IOL=24.0mA 1, 2 OUTPUTS .36 V 1 1, 2 OUTPUTS .50 V 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VM=0.0V, VINH=5.5V VCC=3.0V, VIH=2.1V, VIL=0.9V, IOL=12.0mA VIOL Dynamic output current LOW VCC=5.5V, VINH=3.85V, VIL=1.65V, IOL=50.0mA, 1, OUTPUTS 2, 5 VOH High level output voltage VCC=3.0V, VIH=2.1V, VIL=0.9V, IOH=-50.0uA 1, 2 OUTPUTS 2.90 V 1, 2, 3 VCC=3.0V, VIH=2.1V, VIL=0.9V, IOH=-12.0mA 1, 2 OUTPUTS 2.56 V 1 1, 2 OUTPUTS 2.40 V 2, 3 1, 2 OUTPUTS 4.86 V 1 1, 2 OUTPUTS 4.70 V 2, 3 1, 2 OUTPUTS 3.86 V 1 1, 2 OUTPUTS 3.70 V 2, 3 VCC=4.5V, VIH=3.15V, VIL=1.35V, IOH=-50.0uA 1, 2 OUTPUTS 4.40 V 1, 2, 3 VCC=5.5V, VIH=3.85V, VIL=1.65V, IOH=-50.0uA 1, 2 OUTPUTS 5.40 V 1, 2, 3 VCC=5.5V, VIH=5.5V, VIL=1.65V, IOH = -50mA 1, OUTPUTS 3.85 2, 5 V 1, 2, 3 VCC=5.5V, VIH=3.85V, VIL=1.65V, IOH=-24.0mA VCC=4.5V, VIH=3.15V, VIL=1.35V, IOH=-24.0mA VIOH Dynamic output current HIGH 4 MICROCIRCUIT DATA SHEET MN54AC258-X REV 1B0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 3.0V to 5.5V, Temperature Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL IOZH PARAMETER CONDITIONS NOTES Maximum TRI-STATE Leakage Current High VCC=3.0V, VM=3.0V, VINL=0.0V, VIH=2.1V VCC=4.5V, VM=4.5V, VINL=0.0V, VIH=3.15V VCC=5.5V, VM=5.5V, VINL=0.0V, VIH=3.85V IOZL Maximum TRI-STATE Leakage Current Low VCC=3.0V, VM=0.0V, VINH=3.0V, VIH=2.1V VCC=4.5V, VM=0.0V, VINH=4.5V, VIH=3.15V VCC=5.5V, VM=0.0V, VINH=5.5V, VIH=3.85V ICCH ICCL ICCZ Supply Current Outputs HIGH Supply Current Outputs LOW Supply Current Outputs Tri-State VCC=5.5V, VINH=5.5V, VINL=0.0V VCC=5.5V, VINL=0.0V VCC=5.5V, VINH=5.5V, VINL=0.0V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 OUTPUTS 0.25 uA 1 1, 2 OUTPUTS 5.00 uA 2, 3 1, 2 OUTPUTS 0.25 uA 1 1, 2 OUTPUTS 5.00 uA 2, 3 1, 2 OUTPUTS 0.25 uA 1 1, 2 OUTPUTS 5.00 uA 2, 3 1, 2 OUTPUTS -0.25 uA 1 1, 2 OUTPUTS -5.00 uA 2, 3 1, 2 OUTPUTS -0.25 uA 1 1, 2 OUTPUTS -5.00 uA 2, 3 1, 2 OUTPUTS -0.25 uA 1 1, 2 OUTPUTS -5.00 uA 2, 3 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 4.0 uA 1 1, 2 VCC 80 uA 2, 3 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. tpLH(1) tpHL(1) Propagation Delay Propagation Delay VCC=4.5V VCC=4.5V 5 3, Sn to 4, 6 Zn 1.5 9.50 ns 9 3, Sn to 4, 6 Zn 1.5 11.5 ns 10, 11 3, Sn to 4, 6 Zn 1.5 9.00 ns 9 3, Sn to 4, 6 Zn 1.5 10.5 ns 10, 11 MICROCIRCUIT DATA SHEET MN54AC258-X REV 1B0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. SYMBOL tpLH(2) tpHL(2) tpZH(1) tpZL(1) tpHZ(1) tpLZ(1) tpLH(3) tpHL(3) tpLH(4) tpHL(4) PARAMETER Propagation Delay Propagation Delay Output Enable Time Output Enable Time Output Disable Time Output Disable Time Propagation Delay Propagation Delay Propagation Delay Propagation Delay CONDITIONS NOTES VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=3.0V VCC=3.0V VCC=3.0V VCC=3.0V 6 PINNAME MIN MAX UNIT SUBGROUPS 3, In to 4, 6 Zn 1.5 7.5 ns 9 3, In to 4, 6 Zn 1.5 9.5 ns 10, 11 3, In to 4, 6 Zn 1.5 6.5 ns 9 3, In to 4, 6 Zn 1.5 7.5 ns 10, 11 3, OE to 4, 6 Zn 1.5 7.50 ns 9 3, OE to 4, 6 Zn 1.5 9.0 ns 10, 11 3, OE to 4, 6 Zn 1.5 7.0 ns 9 3, OE to 4, 6 Zn 1.5 8.5 ns 10, 11 3, OE to 4, 6 Zn 1.5 8.50 ns 9 3, OE to 4, 6 Zn 1.5 9.50 ns 10, 11 3, OE to 4, 6 Zn 1.5 7.0 ns 9 3, OE to 4, 6 Zn 1.5 8.5 ns 10, 11 3, 4 Sn to Zn 1.0 12.0 ns 9 3, 4 Sn to Zn 1.0 15.0 ns 10, 11 3, 4 Sn to Zn 1.0 11.5 ns 9 3, 4 Sn to Zn 1.0 14.0 ns 10, 11 3, 4 In to Zn 1.0 9.50 ns 9 3, 4 In to Zn 1.0 12.0 ns 10, 11 3, 4 In to Zn 1.0 8.50 ns 9 3, 4 In to Zn 1.0 10.5 ns 10, 11 MICROCIRCUIT DATA SHEET MN54AC258-X REV 1B0 Electrical Characteristics AC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. SYMBOL tpZH(2) tpZL(2) tpHZ(2) tpLZ(2) PARAMETER Output Enable Time Output Enable Time Output Disable Time Output Disable Time Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: CONDITIONS NOTES VCC=3.0V VCC=3.0V VCC=3.0V VCC=3.0V PINNAME MIN MAX UNIT 3, 4 OE to Zn 1.0 9.50 ns 9 3, 4 OE to Zn 1.0 11.5 ns 10, 11 3, 4 OE to Zn 1.0 9.00 ns 9 3, 4 OE to Zn 1.0 10.5 ns 10, 11 3, 4 OE to Zn 1.0 10.0 ns 9 3, 4 OE to Zn 1.0 11.5 ns 10, 11 3, 4 OE to Zn 1.0 9.00 ns 9 3, 4 OE to Zn 1.0 10.5 ns 10, 11 SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C, TEMPERATURE, SUBGROUPS A1, 2, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A9 & 10. TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2MSEC DURATION MAX. +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS. 7 SUBGROUPS