DTL1N60/DTP1N60/DTU1N60 www.din-tek.jp Power MOSFET FEATURES PRODUCT SUMMARY • Halogen-free According to IEC 61249-2-21 Definition • Dynamic dV/dt Rating • Repetitive Avalanche Rated • Available in Tape and Reel • Fast Switching • Ease of Paralleling • Compliant to RoHS Directive 2002/95/EC 600 VDS (V) RDS(on) (Ω) VGS = 10 V Qg (Max.) (nC) 7 14 Qgs (nC) 2.7 Qgd (nC) 8.1 Configuration Single TO-220AB D DPAK (TO-252) IPAK (TO-251) D D G G S G D S S G D S N-Channel MOSFET Top View ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current SYMBOL VDS VGS VGS at 10 V TC = 25 °C TC = 100 °C ID LIMIT 600 ± 20 1.4 0.89 UNIT V A Currenta Pulsed Drain IDM5.6 Linear Derating Factor Linear Derating Factor (PCB Mount)e Single Pulse Avalanche Energyb EAS Repetitive Avalanche Currenta IAR Repetitive Avalanche Energya EAR Maximum Power Dissipation TC = 25 °C PD Maximum Power Dissipation (PCB Mount)e TA = 25 °C Peak Diode Recovery dV/dtc dV/dt Operating Junction and Storage Temperature Range TJ, Tstg Soldering Recommendations (Peak Temperature) for 10 s Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = 50 V, starting TJ = 25 °C, L = 37 mH, Rg = 25 Ω, IAS = 1.4 A (see fig. 12). c. ISD ≤1.4 A, dI/dt ≤ 40 A/μs, VDD ≤ VDS, TJ ≤ 150 °C. d. 1.6 mm from case. e. When mounted on 1" square PCB (FR-4 or G-10 material). 0.28 0.020 93 1.4 3.6 36 2.5 3.8 - 55 to + 150 260d W/°C mJ A mJ W V/ns °C * Pb containing terminations are not RoHS compliant, exemptions may apply 1 DTL1N60/DTP1N60/DTU1N60 www.din-tek.jp THERMAL RESISTANCE RATINGS SYMBOL MIN. TYP. MAX. Maximum Junction-to-Ambient PARAMETER RthJA - - 110 Maximum Junction-to-Ambient (PCB Mount)a RthJA - - 50 Maximum Junction-to-Case (Drain) RthJC - - 3.5 UNIT °C/W Note a. When mounted on 1" square PCB (FR-4 or G-10 material). SPECIFICATIONS TJ = 25 °C, unless otherwise noted PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage VDS VGS = 0 V, ID = 250 μA 600 - - V ΔVDS/TJ Reference to 25 °C, ID = 1 mA - 0.88 - V/°C VGS(th) VDS = VGS, ID = 250 μA 2.0 - 4.0 V Gate-Source Leakage IGSS VGS = ± 20 V - - ± 100 nA Zero Gate Voltage Drain Current IDSS VDS = 600 V, VGS = 0 V - - 100 VDS = 480 V, VGS = 0 V, TJ = 125 °C - - 500 Drain-Source On-State Resistance Forward Transconductance RDS(on) gfs ID = 1.2 Ab VGS = 10 V VDS = 50 V, ID = 1.2 A μA - - 7.0 Ω 1.4 - - S - 229 - - 42 - - 2.6 - - - 14 Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs - - 2.7 Gate-Drain Charge Qgd - - 8.1 Turn-On Delay Time td(on) - 10 - tr - 13 - - 30 - - 25 - - 4.5 - - 7.5 - - - 2.0 - - 8.0 - - 1.6 - 290 580 ns - 0.67 1.3 μC Rise Time Turn-Off Delay Time Fall Time td(off) VGS = 0 V, VDS = - 25 V, f = 1.0 MHz, see fig. 5 VGS = 10 V ID = 1.4 A, VDS = 360 V, see fig. 6 and 13b VDD = 300 V, ID = 1.4 A, Rg = 18 Ω, RD = 135 Ω, see fig. 10b tf Internal Drain Inductance LD Internal Source Inductance LS Between lead, 6 mm (0.25") from package and center of die contact pF nC ns D nH G S Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulsed Diode Forward Currenta ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Forward Turn-On Time ton MOSFET symbol showing the integral reverse p - n junction diode A G S TJ = 25 °C, IS = 1.4 A, VGS = 0 Vb TJ = 25 °C, IF = 1.4 A, dI/dt = 100 A/μsb V Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. Pulse width ≤ 300 μs; duty cycle ≤ 2 %. 2 D DTL1N60/DTP1N60/DTU1N60 www.din-tek.jp TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 10 10 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V I D , Drain-to-Source Current (A) I D , Drain-to-Source Current (A) TOP 1 0.1 4.5V 20μs PULSE WIDTH TJ = 25 °C 0.01 0.1 1 10 100 TJ = 150 ° C 1 TJ = 25 ° C 0.1 4.0 VDS , Drain-to-Source Voltage (V) I D , Drain-to-Source Current (A) 1 4.5V 20μs PULSE WIDTH TJ = 150 ° C 10 VDS , Drain-to-Source Voltage (V) Fig. 2 - Typical Output Characteristics 100 RDS(on) , Drain-to-Source On Resistance (Normalized) 3.0 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V BOTTOM 4.5V 1 6.0 7.0 8.0 9.0 Fig. 3 - Typical Transfer Characteristics TOP 0.1 5.0 VGS , Gate-to-Source Voltage (V) Fig. 1 - Typical Output Characteristics 10 V DS = 100V 20μs PULSE WIDTH ID = 1.4A 2.5 2.0 1.5 1.0 0.5 0.0 -60 -40 -20 VGS = 10V 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature ( °C) Fig. 4 - Normalized On-Resistance vs. Temperature 3 DTL1N60/DTP1N60/DTU1N60 www.din-tek.jp 10 f = 1MHz V GS = 0V, C iss = C gs + C gd, C dsSHORTED C rss = C gd C oss = C ds + C gd ISD , Reverse Drain Current (A) C, Capacitance (pF) 10000 1000 C iss 100 C oss 10 TJ = 150 ° C 1 TJ = 25 ° C Crss 1 0.1 0.4 A 1 10 100 1000 Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage 1.2 OPERATION IN THIS AREA LIMITED BY RDS(on) ID , Drain Current (A) VGS , Gate-to-Source Voltage (V) 1.0 Fig. 7 - Typical Source-Drain Diode Forward Voltage VDS = 480V VDS = 300V VDS = 120V 12 8 10 10us 100us 1 1ms 4 FOR TEST CIRCUIT SEE FIGURE 13 0 0 2 4 6 8 10 12 14 QG , Total Gate Charge (nC) Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage 4 0.8 100 ID = 1.4A 16 0.6 VSD ,Source-to-Drain Voltage (V) V DS , Drain-to-Source Voltage (V) 20 V GS = 0 V 0.1 TC = 25 ° C TJ = 150 ° C Single Pulse 10 10ms 100 1000 VDS , Drain-to-Source Voltage (V) Fig. 8 - Maximum Safe Operating Area 10000 DTL1N60/DTP1N60/DTU1N60 www.din-tek.jp 1.6 RD VDS VGS D.U.T. ID , Drain Current (A) Rg + - VDD 1.2 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % 0.8 Fig. 10a - Switching Time Test Circuit VDS 0.4 90 % 0.0 25 50 75 100 125 150 10 % VGS TC , Case Temperature ( ° C) td(on) Fig. 9 - Maximum Drain Current vs. Case Temperature td(off) tf tr Fig. 10b - Switching Time Waveforms Thermal Response (Z thJC ) 10 D = 0.50 1 0.20 0.10 0.05 PDM 0.02 0.01 0.1 SINGLE PULSE (THERMAL RESPONSE) t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.01 0.00001 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case VDS 15 V tp L VDS Rg D.U.T IAS 20 V tp Driver + A - VDD IAS 0.01 Ω Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms 5 DTL1N60/DTP1N60/DTU1N60 200 ID 0.65A 0.9A BOTTOM 1.4A 770 TOP 160 120 80 40 0 25 50 75 100 125 150 V DSav , Avalanche Voltage (V) EAS , Single Pulse Avalanche Energy (mJ) www.din-tek.jp 750 730 710 690 670 0.0 A 0.4 1.2 1.6 I av , Avalanche Current (A) Starting TJ , Junction Temperature ( °C) Fig. 12c - Maximum Avalanche Energy vs. Drain Current 0.8 Fig. 12d - Basic Gate Charge Waveform Current regulator Same type as D.U.T. 50 kΩ QG VGS 12 V 0.2 µF 0.3 µF QGS QGD + D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13a - Maximum Avalanche Energy vs. Drain Current 6 Fig. 13b - Gate Charge Test Circuit DTL1N60/DTP1N60/DTU1N60 www.din-tek.jp Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - Rg • • • • + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple ≤ 5 % ISD Note a. VGS = 5 V for logic level devices Fig. 14 - For N-Channel 7 Package Information www.din-tek.jp TO-220AB MILLIMETERS A E F D H(1) Q ØP 3 2 L(1) 1 M* L b(1) INCHES DIM. MIN. MAX. MIN. A 4.25 4.65 0.167 MAX. 0.183 b 0.69 1.01 0.027 0.040 b(1) 1.20 1.73 0.047 0.068 c 0.36 0.61 0.014 0.024 D 14.85 15.49 0.585 0.610 E 10.04 10.51 0.395 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 F 1.14 1.40 0.045 0.055 H(1) 6.09 6.48 0.240 0.255 J(1) 2.41 2.92 0.095 0.115 L 13.35 14.02 0.526 0.552 L(1) 3.32 3.82 0.131 0.150 ØP 3.54 3.94 0.139 0.155 Q 2.60 3.00 0.102 0.118 ECN: X12-0208-Rev. N, 08-Oct-12 DWG: 5471 Notes * M = 1.32 mm to 1.62 mm (dimension including protrusion) Heatsink hole for HVM C b e J(1) e(1) 1 3DFNDJH,QIRUPDWLRQ www.din-tek.jp TO-252AA (HIGH VOLTAGE) E b3 E1 L3 D1 D H L4 b2 b A c2 e A1 L1 L c θ L2 MILLIMETERS INCHES DIM. MIN. MAX. MIN. MAX. E 6.40 6.73 0.252 0.265 L 1.40 1.77 0.055 L1 2.743 REF L2 0.070 0.108 REF 0.508 BSC 0.020 BSC L3 0.89 1.27 0.035 0.050 L4 0.64 1.01 0.025 0.040 D 6.00 6.22 0.236 0.245 H 9.40 10.40 0.370 0.409 b 0.64 0.88 0.025 0.035 b2 0.77 1.14 0.030 0.045 b3 5.21 5.46 0.205 e 2.286 BSC 0.215 0.090 BSC A 2.20 2.38 0.087 0.094 A1 0.00 0.13 0.000 0.005 c 0.45 0.60 0.018 0.024 c2 0.45 0.58 0.018 0.023 D1 5.30 - 0.209 - E1 4.40 - 0.173 - θ 0' 10' 0' 10' ECN: S-81965-Rev. A, 15-Sep-08 DWG: 5973 Notes 1. Package body sizes exclude mold flash, protrusion or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 0.10 mm per side. 2. Package body sizes determined at the outermost extremes of the plastic body exclusive of mold flash, gate burrs and interlead flash, but including any mismatch between the top and bottom of the plastic body. 3. The package top may be smaller than the package bottom. 4. Dimension "b" does not include dambar protrusion. Allowable dambar protrusion shall be 0.10 mm total in excess of "b" dimension at maximum material condition. The dambar cannot be located on the lower radius of the foot. 1 3DFNDJH,QIRUPDWLRQ www.din-tek.jp TO-251AA (HIGH VOLTAGE) 4 3 E1 E Thermal PAD 4 b4 θ2 4 A 0.010 0.25 M C A B L2 4 c2 A θ1 B D D1 A C 3 Seating plane 5 C L1 L3 (Datum A) C L B B A A1 3 x b2 View A - A 2xe c 3xb 0.010 0.25 M C A B Plating 5 b1, b3 Base metal Lead tip c1 (c) 5 (b, b2) Section B - B and C - C MILLIMETERS DIM. MIN. INCHES INCHES MILLIMETERS MAX. MIN. MAX. DIM. MIN. MAX. MIN. MAX. A 2.18 2.39 0.086 0.094 D1 5.21 - 0.205 - A1 0.89 1.14 0.035 0.045 E 6.35 6.73 0.250 0.265 4.32 - 0.170 - b 0.64 0.89 0.025 0.035 E1 b1 0.65 0.79 0.026 0.031 e b2 0.76 1.14 0.030 0.045 L 8.89 9.65 0.350 0.380 b3 0.76 1.04 0.030 0.041 L1 1.91 2.29 0.075 0.090 b4 4.95 5.46 0.195 0.215 L2 0.89 1.27 0.035 0.050 2.29 BSC 2.29 BSC c 0.46 0.61 0.018 0.024 L3 1.14 1.52 0.045 0.060 c1 0.41 0.56 0.016 0.022 θ1 0' 15' 0' 15' c2 0.46 0.86 0.018 0.034 θ2 25' 35' 25' 35' D 5.97 6.22 0.235 0.245 ECN: S-82111-Rev. A, 15-Sep-08 DWG: 5968 Notes 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Dimension are shown in inches and millimeters. 3. Dimension D and E do not include mold flash. Mold flash shall not exceed 0.13 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body. 4. Thermal pad contour optional with dimensions b4, L2, E1 and D1. 5. Lead dimension uncontrolled in L3. 6. Dimension b1, b3 and c1 apply to base metal only. 7. Outline conforms to JEDEC outline TO-251AA. 1 $SSOLFDWLRQ1RWH www.din-tek.jp RECOMMENDED MINIMUM PADS FOR DPAK (TO-252) 0.224 0.243 0.087 (2.202) 0.090 (2.286) (10.668) 0.420 (6.180) (5.690) 0.180 0.055 (4.572) (1.397) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Return to Index APPLICATION NOTE 1 Legal Disclaimer Notice Disclaimer www.din-tek.jp ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death. Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. 1