Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 2A GENERAL PURPOSE PLASTIC RECTIFIER GP20-005 THRU GP20-10 FEATURES z LOW FORWARD VOLTAGE z HIGH CURRENT CAPABILITY z LOW LEAKAGE CURRENT z HIGH SURGE CAPABILITY 1.0(25.4) MIN .034(0.9) .028(0.7) .300(7.6) .230(5.8) MECHANICAL DATA z CASE: DO15, MOLDED PLASTIC USE UL 94V-0 RECOGNIZED FLAME RETARDANT EPOXY, DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINAL: AXIAL LEADS, SOLDERABLE PER MIL-STD-202 METHOD 208 z POLARITY: COLOR BAND DENOTES CATHODE z MOUNTING POSITION : ANY z WEIGHT: 0.4 GRAMS .140(3.6) .104(2.6) 1.0(25.4) MIN MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS SYMBOL GP20-005 GP20-01 GP20-02 GP20-04 GP20-06 GP20-08 GP20-10 UNITS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT 0.375”(9.5mm) LEAD LENGTH AT TA=55°C PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF SINE-WAVE SUPERIMPOSED ON RATED LOAD VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 2.0 A IFSM 70 A TYPICAL THERMAL RESISTANCE (NOTE 2) Rθja 25 ℃/W OPERATING TEMPERATURE RANGE TOP -55 TO + 175 ℃ ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL GP20-005 GP20-01 GP20-02 GP20-04 GP20-06 GP20-08 GP20-10 UNITS MAXIMUM FORWARD VOLTAGE AT IO DC VF 1.1 V MAXIMUM REVERSE CURRENT AT 25℃ IR 5 μA MAXIMUM REVERSE CURRENT AT 100℃ IR 50 μA NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS 2. BOTH LEADS ATTACHED TO HEAT SINK 35×35×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm GP20-005 THRU GP20-10 Page: 1 RATINGS AND CHARACTERISTIC CURVE GP20-005 THRU GP20-10 FIG. 2 -TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 1- FORWARD CURRENT DERATING CURVE 20 10 Single Phase Half Wave 60 Hz Resistive or Inductive Load Inductive load INSTANTANEOUS FORWARD CURRENT (A) AVERAGE FORWARD RECTIFIED CURRENT AMPERES 3.0 .375〃(9.5mm) Lead Length 2.0 1.0 4 2 1.0 .4 TJ=25oC Pulse Width=300us 1% Duty Cycle .2 .1 .04 .02 .01 .6 0 25 50 75 100 .8 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE , (V) 125 150 175 AMBIENT TEMPERATURE, oC FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT,(uA) 100 80 8.3ms Single Half Sine-Wave (JEDEC Method) 60 40 20 10 4 TJ=100oC 1.0 .4 .1 .04 TJ=25oC .01 0 20 40 60 80 100 120 140 0 1 2 4 6 8 10 20 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 40 60 80100 NUMBER OF CYCLES AT 60Hz FIG. 5 -TYPICAL JUNCTION CAPACITANCE 200 JUNCTION CAPACITANCE-(pF) PEAK FORWARD SURGE CURRENT (A) FIG. 3 -PEAK FORWARD SURGE CURRENT 100 60 40 20 TJ=25oC 10 6 4 2 1 .1 GP20-005 THRU GP20-10 .2 .4 1.0 2 4 10 20 40 REVERSE VOLTAGE, (V) 100 Page: 2