MODULE Signal processing unit for PSD module C10459, C10460 Specifically dedicated for PSD modules (C10442/C10443 series) C10459 and C10460 are signal processing unit specifically design to convert the output from a PSD module (C10442/C10443 series) into position signals. C10459 is for PSD module C10442 series and C10460 is for C10443 series. Position signals are output as both analog and digital signals. In case of analog output, connecting the output connector to a voltmeter shows an output voltage that directly represents the position information (The output voltage indicates a position from the center of the PSD, 1 V=1 mm). While, digital output allows serial connection (RS-232C) to a PC. Position information can be easily loaded into a PC via the sample software that comes with the unit. Features Applications l Both analog and digital outputs Analog output: Output voltage directly represents the position information Digital output: High-resolution digital output (16-bit) l AC adapter (+12 V) operation l Supplies power to PSD modules l Optical axis alignment l Range finder l 3-dimensional measurement l Length measurement l Liquid level sensors l Distortion measurement ■ Absolute maximum ratings (Ta=25 °C) Parameter Supply voltage Maximum input voltage Maximum output voltage Operating temperature *1 Storage temperature *1 *1: No condensation Symbol Vcc Max. Vin Max. Vout Topr Tstg Value +18 ±13 ±15 0 to +40 -10 to +60 Unit V V V °C °C ■ Specifications (Vcc=+12 V, Ta=25 °C, unless otherwise noted) Parameter Supply voltage Input voltage Current consumption Symbol Vcc Vin Icc Min. +9 -12 - Typ. +12 200 Max. +18 0 - Unit V V mA Parameter Symbol Min. Typ. O utput a mplitude voltage Vout -10 Output noise voltage Vn 5 Offset voltage Vos -5 Position detection error E ±3 Position resolution *2 5 ∆R Cut-off frequency (-3 dB) fc 13.5 *2: Reference value. Values may vary depending on operating environment. Max. +10 +5 - Unit V mVp-p mV % µm kHz Analog section Digital section Parameter Symbol Min. Typ. Max. Signal conversion Tr1 2 time - mode 1 *3 Signal conversion Tr2 5 time - mode 2 *4 Output form Conforms to RS-232C (output position signals and light power)16-bit *3: Communication parameter 115200 bps/8-bit/Non-parity/1 stop bit *4: Communication parameter 38400 bps/8-bit/Non-parity/1 stop bit Unit ms ms - 1 Signal processing unit for PSD module C10459, C10460 ■ Connection example AC ADAPTER * PSD MOUDLE C10442, C10443 SECURE WITH OPTICAL BENCH ROD, ETC. CABLE FOR ANALOG OUTPUT * CONNECTION CABLE FOR PSD MODULE * VOLTMETER, OSCILLOSCOPE, etc. SIGNAL PROCESSING UNIT FOR PSD MODULE C10459, C10460 RS232C CABLE PC * Accessory of a signal processing unit for PSD module C10459, C10460 KACCC0349EB ■ Sample software (accessory) Sample software acquires and displays position data as numerical values and on an XY graph, as well as recording the data. · Acquisition count: 1 to 300000 · Acquisition interval Mode 1: 2 ms to 120000 ms (in 2 ms intervals) Mode 2: 5 ms to 300000 ms (in 5 ms intervals) 2 Signal processing unit for PSD module C10459, C10460 DIGITAL ANALOG DIGITAL OUTPUT 12V C10459 PSD SIGNAL PROCCESING UNIT RS-232C HEAD C10442-01 C10442-02 C10442-03 ±10V RANGE 2ms 150 ANALOG OUTPUT LIGHT Lo OK Hi LEVEL CONNECTOR FOR PSD MODULE HR10A-10R-10S (HIROSE ELECTRIC 10-PIN, FEMALE) 5ms MODE ON POWER OFF PSD SIGNAL PROCCESING UNIT C10459 DC INPUT 1A ■ Dimensional outline (unit: mm) CONNECTOR FOR ANALOG OUTPUT DX10GM-20SE (HIROSE ELECTRIC 20-PIN, FEMALE) CONNECTOR FOR DIGITAL OUTPUT JEY-9S-1A3A90 (JST, 9-PIN, FEMALE) 100 30 KACCA0195EC ■ Accessories · AC adapter · Cable for PSD module 100 cm CONNECTOR HR10A-10P-10P (HIROSE ELECTRIC, 10-PIN, MALE) CONNECTOR HR10A-10P-10S (HIROSE ELECTRIC, 10-PIN, FEMALE) KACCA0196EA · Cable for analog output (No connector on one end) 100 cm CONNECTOR 10120-6000EL (SUMITOMO 3M, 20-PIN, MALE) KACCA0197EA · Sample software CD-ROM (compatible OS: Windows2000/XP/7 *4) *4: Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Note: RS232C cable is not supplied with C10459 and C10460. Use a commercially available cable with 9-pin D-sub connectors. (male - female, straight) Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. Type numbers of products listed inthe specification sheets or supplied as samples may have a suffix "(X)" which means tentative specifications or a suffix "(Z)" which means developmental specifications. ©2010 Hamamatsu Photonics K.K. HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184, www.hamamatsu.com U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 Cat. No. KACC1135E04 Aug. 2010 DN 3