D3KB05 thru D3KB10 GLASS PASSIVATED REVERSE VOLTAGE FORWARD CURRENT BRIDGE RECTIFIERS - 50 to 1000Volts - 3.0 Amperes D3K FEATURES ● Glass passivated chip junction .057(1.45) R2 .276(7.0) .252(6.4) .484(12.3) .461(11.7) .437(11.1) .413(10.5) ldeal for printed circuit board MACHANICAL DATA Method 208C ● Case:UL-94 Class V-0 recognized Flane Retardant Epoxy ● Polarity:Polarity symbol marked on body ● Mounting position:any .055(1.4) .039(1.0) .059(1.5) .043(1.1) .484(12.3) .461(11.7) .055(1.4) .047(1.2) ● Terminal:Plated leads solderable per MIL-STD 202E, .134 .122 (3.4) (3.1) ● High surge current capability .130(3.3) .114(2.9) .110(2.8) .094(2.4) .555(14.1) .531(13.5) .024 (0.6) ● High case dielectric strength .094(2.4) .071(1.8) .049(1.25) .041(1.05) .034(0.86) .026(0.66) .024(0.6) .016(0.4) .162 .162 .162 .138 .138 .138 (4.11)(4.11)(4.11) (3.51)(3.51)(3.51) 2 1 3 4 1 2 + ~ ~ 3 4 - Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOL D3KB05 D3KB1 D3KB2 D3KB4 D3KB6 D3KB8 D3KB10 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current @ TC=140℃ (with heatsink) @ Ta=29℃ I(AV) 3 A 1.2 (without heatsink) Peak Forward Surge Current IFSM 90 A VF 1.05 V 2 It 35 A2s RθJa 55 with heatsink RθJC 1.5 without heatsink RθJL 15 8.3ms Single Half Sine-Wave Super Imposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 1.5A DC 2 I t Rating for Fusing (t<8.3ms) Maximum Typical Thermal Resistance without heatsink Maximum DC Reverse Current @ Ta =25℃ at Rated DC Blocking Voltage @ Ta =125℃ Operating Temperature Range Storage Temperature Range 10.0 IR 500 ℃/W μA TJ -55 to +150 ℃ TSTG -55 to +150 ℃ REV. 1, 30-Dec-2011 ~ 552 ~ RATING AND CHARACTERTIC CURVES D3KB05 thru D3KB10 FIG.1-DERATING CURVE OUTPUT RECTIFIED CURRENT FIG.2-MAXIMUM NON-REPETITIVE SURGE CURRENT AVERAGE FORWARD CURRENT AMPERES 3.0 90 PEAK FORWARD SURGE CURRENT, AMPERES with heatsink 2.5 2.0 1.5 without heatsink 1.0 0.5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.0 20 0.1 0 40 60 80 100 120 140 150 80 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 60 40 20 0 1 CASE TEMPERATURE, °C 2 5 10 20 100 50 NUMBER OF CYCLETS AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.5-TYPICAL REVERSE CHARACTERISTICS 20.0 Pulse Width = 300μs 1% Duty Cycle 100.0 INSTANTANEOUS REVERSE CURRENT ,(uA) INSTANTANEOUS FORWARD CURRENT, AMPERES 10.0 T C=125°C 1.0 0.1 T C=25°C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 T J=150°C 10.0 T J=125°C 1.0 0.1 T J=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE. VOLTS REV. 1, 30-Dec-2011 ~ 553 ~