EGP50A-EGP50G High Efficiency Rectifiers VOLTAGE RANGE: 50 --- 400 V CURRENT: 5.0 A DO - 27 Features Low cost Diffused junction Low leakage Low forward voltage High current capability Easily cleaned with alcohol,Isopropanol and similar solvents The plastic material carries U/L recognition 94V-0 Mechanical Data Dimensions in millimeters Case:JEDEC DO--27,molded plastic Polarity: Color band denotes cathode Weight: 0.041 ounces,1.15 grams Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase,half wave,60 Hz,resistive or inductive load. For capacitive load,derate by 20%. Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forw ard rectified current @TL=55 9.5mm lead length VRRM VRMS VDC EGP 50A EGP 50B EGP 50C EGP 50D EGP 50F EGP 50G UNITS 50 35 50 100 70 100 150 105 150 200 140 200 300 210 300 400 280 400 V V V IF(AV) 5.0 A IFSM 150 A Peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @TJ =125 Maximum instantaneous forw ard voltage @ 5.0 A Maximum reverse current @TA=25 at rated DC blocking voltage @TA=125 Maximum reverse recovery time (Note1) Typical junction capacitance (Note2) Typical thermal resistance (Note3) Operating junction temperature range Storage temperature range VF 0.95 5.0 50 50 IR trr CJ RθJL TJ TSTG 1.25 95 NOTE: 1. Measured with I F=0.5A, I R=1A, I rr=0.25A. 2. Measured at 1.0MHz and applied rev erse uoltage of 4.0V DC. 3.Thermal resistance f rom junction to ambient. http://www.luguang.cn A 75 5.0 - 55 ---- + 150 - 55 ---- + 150 mail:[email protected] V ns pF ／Ｗ EGP50A-EGP50G High Efficiency Rectifiers Ratings AND Charactieristic Curves FIG.1 --TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 N 1. t rr 10 N 1. +0.5A D.U.T. (+) 25VDC (approx) (-) (-) 0 PULSE GENERATOR (NOTE2) OSCILLOSCOPE (NOTE 1) 1 NONINDUCTIVE -0.25A (+) -1.0A 1cm SET TIMEBASEFOR 20 ns/cm NOTES:1.RISETIME=7ns MAX.INPUT IMPEDANCE=1MΩ.22pF 2.RISETIME=10ns MAX.SOURCEIMPEDANCE=50Ω. FIG.4--TYPICAL REVERSE CHARACTERISTICS PEAK FORWARD SURGE CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT AMPERES FIG.3 --TYPICAL FORWARD CHARACTERISTICS 100 T J =25 Pulse Width=300 µ S 10 50\100\150\200V 300\400V 1.0 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 5.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 2.5 0.375"(9.5mm)LEAD LENGTH 0 INSTANTANEOUS FORWARD VOLTAGE,VOLTS 100 75 50 EGP50A-EGP50D EGP50F&EGP50G 25 0 0.1 1 4 10 REVERSE VOLTAGE,VOLTS http://www.luguang.cn 100 75 100 125 150 175 150 T J = 1 25 8 .3 m s S in g le H a lf S in e-W ave 100 E G P 50 A -E G P 50 G AMPERES 125 50 FIG.6--FORWARD DERATING CURVE AVERAGE FORWARD CURRENT JUNCTION CAPACITANCE,pF TJ =25 150 25 NUMBER OF CYCLES AT 60Hz FIG.5--TYPICAL JUNCTION CAPACITANCE 175 0 50 0 1 10 LEAD TEMPERATURE, mail:[email protected] 100