Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8805131100 Item: BE05-1A31-P Coil Data at 20 C Conditions Min Typ Conditions Min Typ Max Unit Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 31 Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release Time Capacity Special Product Data Insulation resistance Coil/Contact Dielectric Strength Coil/Contact Housing material Sealing compound Connection pins Environmental data Shock Vibration Operating temperature Storage temperature A Hg independent on position up to 500V max. 50W, with 1000V max. 5W DC or Peak AC DC or Peak AC DC or Peak AC !" Start Value # $ % ! % RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch & ' () Conditions Min RH <45%, 200 VDC test voltage according to IEC 255-5 Typ Max ' Polycarbonat Polyurethan cu-alloy tinned Conditions Min Typ Unit & * Max Unit 1/2 sine wave duration 11ms from 10 - 2000 Hz + + - , Modifications in the sense of technical progress are reserved Designed at: Last Change at: 29.10.09 Designed by: Last Change by: DSTASTNY Approval at: Approval at: 29.10.09 Approval by: Approval by: DSTASTNY Version: 01 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8805131100 Item: BE05-1A31-P Environmental data Soldering temperature Washability Conditions Min wave sodering max. 5 sec. Typ fully sealed Max Unit . Modifications in the sense of technical progress are reserved Designed at: Last Change at: 29.10.09 Designed by: Last Change by: DSTASTNY Approval at: Approval at: 29.10.09 Approval by: Approval by: DSTASTNY Version: 01