Headquarter Europe MEDER electronic AG Headquarter USA MEDER electronic Inc. Friedrich-List Strasse 6 D-78234 Engen-Welschingen 766 Falmouth Rd Mashpee, MA 02649 Tel.: +49(0)7733-9487-0 Fax: +49(0)7733-9487-32 Phone: +1/ 508-539-0002 Fax: +1/ 508-539-4088 eMail: [email protected] Internet: www.meder.com eMail: [email protected] Dimensions (mm) Reed Relay: BE05-1A71-V Part Number: 8805171300 Layout 11 / Pitch 2,54 mm / Top View Marking MEDER-Label Type Layout ProductionCodeEN60062 /Factory Code Pins: ∅ 0,65 mm / L 3,2 ± 0,3 mm Coil/Relay Characteristics Conditions at 20°C Min. Typ. 310 345 5 72 Coil Resistance Nominal Voltage Nominal Rated Power Operate Voltage Release Voltage Max. Units 380 Ω VDC mW VDC VDC 3,5 0,28 Contact Data 71 (Form A/Dry) Contact Rating Switching Voltage Switching Current Carry Current Static Contact Resistance (initial) Insulation Resistance Breakdown Voltage Operate Time including Bounce Release Time Capacitance Any combination of the switching voltage and current must not exceed the given rated power DC or Peak AC DC or Peak AC DC or Peak AC Measured with Nominal Voltage RH 45% 1010 250 Measured with Nominal Voltage Measured with no coil suppression 10 W 200 0,5 1,75 150 V A A mΩ Ω VDC ms ms pF 0,5 0,1 0,3 Environmental Data Insulation Resistance Coil to Contact Dielectric Strength Coil to Contact Shock Vibration Operating Temperature Storage Temperature Soldering Temperature Cleaning Material of Case Sealing Compound Material of Pins Remarks Customer / Customer part number 1012 4,5 RH 45% ½ sine wave, duration 11ms from 10 - 2000 Hz 10°C/min max. allowable 10°C/min max. allowable 5 sec. at -20 -40 Ω kV AC 50 20 70 105 260 fully sealed Plastics / Polycarbonat Polyurethan Cu-alloy tinned g g °C °C °C Standard Part Modifications in the sense of technical progress are reserved [VRRp-02.doc] REVISION / Rev. No.: 00 Page 1 of 1 DESIGNED BY: REVISED BY: Werner Kovacs APPROVED BY: APPROVED BY: Rudi Rippl DATE : DATE : 04.01.2005