MEDER electronic AG Friedrich-List-Strasse 6 78234 Engen-Welschingen Phone.: Fax: eMail: Internet: dimensions (tolerance ± 0,1mm) +49 (0) 7733 / 9487-0 +49 (0) 7733 / 9487-32 [email protected] www.meder.com DIP24-2A72-21L type: part number: 3224200021 layout 21 L pitch 2,54 / top view marking Type data-code EN 60062 coil data condition coil resistance nominal voltage pull-in voltage drop-out voltage coil voltage coil voltage at 20°C nominal power Min. Typ. 1800 Max. unit 2200 W VDC VDC VDC VDC VDC 24 16.8 3.6 at 20°C at 60°C determined with nominal voltage and rated current 47,0 30,2 288 mW contact data 72 (Form A/Dry) contact material rated power switching voltage switching current carry current static contact resistance Insulation resistance breakdown voltage capacitance Ruthenium each combination of the switching voltage and current must not exceed the given rated power initial values measured with 1,4 x ATpull-in RH W 45% 15 W 200 1,0 1,25 150 VDC A A mW W VDC pF 1010 250 without test coil 0,3 relay data insulation resistance coil-contact insulation voltage coil-contact shock vibration operate time including bounce release time 1011 1,5 ½ sine wave, duration 11ms 50 – 2000Hz measured at 1,4 x ATpull-in 150 10 0,5 0,1 W kVDC g g ms ms general data operating temperature storing temperature soldering temperature cleaning material of case material of pins -20 -35 10 sec. at modifications in the sense of technical progress are reserved 70 95 260 fully sealed mineral-filled epoxy Cu-alloy tinned index 00 2000-12-04 °C °C °C