Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 1312272021 Item: DIL12-2A72-21L Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Pull-In voltage Drop-Out voltage Contact data 66 Contact rating Switching voltage (<21 AT) Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (>20 AT) Operate time incl. bounce Release time Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Housing material Sealing compound Connection pins Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "# Start Value & % ' Start Value $ % !"! % ! & RH <45 %, 100 VDC test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ( ) Conditions Min Typ Max Unit 2 A - NO according to EN 60255-5 RH <45%, 200 VDC measuring voltage Conditions PBT glass fibre reinforced Polyurethan Copper alloy tin plated Min Typ 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz , , wave soldering max. 5 sec. fully sealed Max ) ( Unit * * + + + Modifications in the sense of technical progress are reserved Designed at: 21.06.11 Designed by: KYANG Approval at: 23.06.11 Approval by: DRUDOLF Last Change at: 14.07.11 Last Change by: CRUF Approval at: 14.07.11 Approval by: CRUF Version: 02