REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C D E DESCRIPTION DATE 06-01-06 01-24-08 07-09-08 10-27-09 RoHS Compliancy Updated Specifications Graphics and Notes Update Electrical Characteristics Update APPROVED DP DP DP LY MECHANICAL DIMENSIONS: 2.65 R0.04MAX 1.15 1.063 ± 0.003 ELECTRICAL CHARACTERISTICS: 2.6 ± 0.003 PANEL CUTOUT 0.65 1.83 2.04 0.57 FUSE HOLDER .250 2.57 TYP ELECTRICAL SCHEMATIC: 1-1. VOLTAGE RATING.....................................................115/250VAC 1-2. CURRENT RATING A. @ 115 VAC/250 VAC (UL,CSA)..........6A RMS MAX B. @ 250 VAC (SEMKO) ..........................4A RMS MAX 1-3. OPERATING FREQUENCY ........................................... 48-440Hz 1-4. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND .................................2000VAC B. LINE TO LINE ...........................................2000VAC 1-5. MINIMUM INSULATION RESISTANCE: @ 500VDC ONE MINUTE A. LINE & NEUTRAL TO GROUND............10M OHM B. LINE TO NEUTRAL ...................................10M OHM 1-6. SAFETY: 1-7. SINGLE 5X20mm FUSEHOLDER 1-8. SNAP-IN PANEL THICKNESS: .04IN~.07IN (1.0mm~1.8mm) 1-9. RoHS COMPLIANT 1.06 Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. PPC DIVISION 762-18/005 Part Number: Description: MULTI-FUNCTION MODULE UNIT: in REV. E 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 S.Tsai 05-04-01 05-04-01 JJH / 05-04-01