SF2098H • • • • Low Insertion Loss Direct Match to 50 ohms 2.0 x 1.6 mm Surface-mount Case Complies with Directive 2002/95/EC (RoHS) 915 MHz SAW Filter Pb Absolute Maximum Ratings Rating Maximum Incident Power in Passband Value Units +15 dBm 3 VDC Operating Temperature Range -40 to +85 °C Storage Temperature Range in Tape and Reel -40 to +85 °C Maximum DC Voltage on any Non-ground Terminal Maximum Soldering Profile (5 cycles maximum) 265°C for 10 s SM2016-4 Electrical Characteristics Characteristic Center Frequency Insertion Loss, 902 to 928 MHz Amplitude Ripple, Peak-to-Peak, 902 to 928 MHz Input/Output Return Loss, 902 to 928 MHz Group Delay Ripple, Peak-to-Peak, 902 to 928 MHz Attenuation Referenced to 0 dB: 10 to 857.5 MHz 857.5 to 882.5 MHz 970 to 1005 MHz 1005 to 1110 MHz 1110 to 3000 MHz Source impedance Load impedance Single-ended Input / Output Impedance Match Sym Notes Min fC IL Typ Max 915 2.0 0.8 9.5 35 3.0 1.5 8.0 50 40 35 35 45 30 55 48 48 52 35 50 50 ZS ZL Units MHz dB ns dB Ω Ω No matching network required for operation at 50 ohms Case Style Lid Symbolization ( Y=year, W=week) SM2016-4 3H, YW CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. www.RFM.com E-mail: [email protected] © 2010-2011 by RF Monolithics, Inc. Page 1 of 6 SF2098H - 9/20/11 Filter Response Plots www.RFM.com E-mail: [email protected] © 2010-2011by RF Monolithics, Inc. Page 2 of 6 SF2098H - 9/20/11 Passband Amplitude Plot Passband Group Delay Plot Passband Return Loss Plot www.RFM.com E-mail: [email protected] © 2010-2011by RF Monolithics, Inc. Page 3 of 6 SF2098H - 9/20/11 Input and Output Impedance Plots www.RFM.com E-mail: [email protected] © 2010-2011by RF Monolithics, Inc. Page 4 of 6 SF2098H - 9/20/11 SM2016-4 Case 4-Terminal Ceramic Surface-Mount Case 2.0 X 1.6 mm Nominal Footprint Electrical Connections Connection Terminals Input 1 Output 3 Ground 2, 4 Dimensions Millimeters Min Nom Max A 1.60 0.063 P C B P A D L A Y O U T Min Inches Nom B 2.00 0.079 C 0.90 0.035 D 0.10 0.004 E 0.10 0.004 F 0.70 0.028 G 0.50 0.020 H 0.10 0.004 Max 2 .2 1 .8 0 .6 0 .8 D im e n s io n s in m m A ll p a d s h a v e th e s a m e d im e n s io n s TOP VIEW B 3 C BOTTOM VIEW 3 E F 4 A D G 4 SIDE VIEW 1 www.RFM.com E-mail: [email protected] © 2010-2011by RF Monolithics, Inc. 2 2 H 1 Page 5 of 6 SF2098H - 9/20/11 Reel Dimensions www.RFM.com E-mail: [email protected] © 2010-2011by RF Monolithics, Inc. Page 6 of 6 SF2098H - 9/20/11