Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS ■ Product information in this catalog is as of October 2010. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. ■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. ■ Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. ■ All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. ■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called“TAIYO YUDEN’ s official sales channel” ). It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel. ■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. ■ Caution for export Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 11 notice_e-01 HIGH VALUE MULTILAYER CERAMIC CAPACITORS WAVE ■ FEATURES ■ APPLICATIONS ◦T he use of nickel as electrode material and plating processing improve the solderability and heat resistance characteristics. It also prevents migration and raises the level of reliability. ◦General digital circuit REFLOW ◦Power supply bypass capacitors Liquid crystal modules Liquid crystal drive voltage lines LSI, IC, converters(both for input and output) ◦Low equivalent series resistance(ESR) provides superior noise absorption characteristics. ◦Smoothing capacitors DC-DC converters (for both input and output) Switching power supplies (secondary side) ◦Compared to tantalum or aluminum electrolytic capacitors, multilayer ceramic capacitors offer a number of superior features, including: Higher permissible ripple current values Smaller case sizes with high rated voltage Improved reliability due to higher insulation resistance and breakdown voltage. ■ PART NUMBER J M K ❶ ❷ ❶Rated voltage 〔VDC〕 A 4 J 6.3 L 10 E 16 T 25 G 35 U 50 3 ❸ ❷Series name Multilayer M ceramic capacitor ❸End termination K Plated Code Type △ ALL 107 L Standard 1.6＋0.15/－0.05 212 2.0＋0.15/－0.05 316 3.2±0.2 325 3.2±0.3 1 6 △ B ❹ ❺ ❹Dimension Type （inch） L×W［mm］ 107 （0603） 1.6×0.8 212 （0805） 2.0×1.25 316 （1206） 3.2×1.6 325 （1210） 3.2×2.5 J 1 6 M L － T △ 0 ❻ ❼ ❻Temperature characteristics code B BJ X5R B7 X7R F △F Y5V △＝Blank space ❽ ❼Nominal capacitance 〔pF〕 example 473 47,000 105 1,000,000 ❽Capacitance tolerance K ±10％ M ±20％ Z ❿ ⓫ ❿Special code － Standard ＋80％ －20 ❺Dimension tolerance［mm］ T Code Type L W T Standard 0.45±0.05 107 1.6＋0.2/－0 0.8＋0.2/－0 0.8＋0.15/－0.05 0.8＋0.2/－0 B 0.45±0.05 0.85±0.1 212 2.0＋0.2/－0 1.25＋0.2/－0 1.25＋0.15/－0.05 0.85±0.1 1.25＋0.2/－0 1.25＋0.15/－0.05 △＝Blank space 0.85±0.1 1.6±0.2 1.6±0.2 2.5±0.3 2.5±0.3 W Standard 0.8＋0.15/－0.05 A ❾ ⓬ ⓬Internal code △ Standard △＝Blank space ❾ Thickness 〔mm〕 K 0.45 A 0.8 D 0.85 G 1.25 L 1.6 N 1.9 Y 2.0max M 2.5 T P ⓫Packaging φ178mm Taping （4mm pitch） All types φ178mm Taping （4mm pitch, 1000pcs/reel） 1210Type Thickness：M ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Type L W □MK107 （0603 inch） 1.6±0.10 0.8±0.10 □MK212 （0805 inch） 2.0±0.10 1.25±0.10 □MK316 （1206 inch） 3.2±0.15 1.6±0.15 □MK325 （1210 inch） 3.2±0.30 2.5±0.20 Dimension [mm] T 0.45±0.05 0.8±0.10 0.45±0.05 0.85±0.10 1.25±0.10 0.85±0.10 1.25±0.10 1.6±0.20 0.85±0.10 1.9±0.20 1.9＋0.1/－0.2 2.5±0.20 Standard quantity [pcs] Paper tape Embossed tape e K A K D G D G L D N Y M 0.35±0.25 — 4000 0.5±0.25 0.5＋0.35/－0.25 4000 — — 4000 3000 — 3000 2000 — 2000 — 0.6±0.3 （P） 500 （T）, 1000 ■ AVAILABLE CAPACITANCE RANGE 107 Type Cap X7R B/X5R 〔μF〕 VDC 50 25 16 10 6.3 50 35 25 16 10 〔3-digit〕 0.1 104 0.15 154 0.22 224 A A A A A A A 0.33 334 0.47 474 A A A A A A A A A 0.68 684 1 105 A A A A A A A A A 2.2 225 A A A A 3.3 335 4.7 475 A A 6.8 685 10 106 A 22 226 47 476 100 107 212 316 325 F/Y5V X7R B/X5R F/Y5V X7R B/X5R F/Y5V X7R B/X5R F/Y5V 6.3 4 50 25 16 10 50 35 25 16 10 6.3 50 25 16 10 6.3 50 16 10 6.3 50 25 16 10 6.3 50 25 16 10 6.3 4 35 25 16 10 50 25 16 10 6.3 50 35 25 16 10 6.3 16 10 6.3 A A A G G A G G A A G G G G G A A G G G G G A A G G G G G G A A A G G L G G G G G G G G G G G G G L L L L L L L G G G G L L L L L L L L L L L L L L L L L L L L L L L L L L L L L N N M N N N M N N N N N M N M.N N N M M M M.Y Y N N N M M M M M.N M M.Y Note：Letters in the table indicate product thickness. ■■ X5R only ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 4 11 mlcc01_e-01 ●Low Profile Multilayer Ceramic Capacitors Cap 〔μF〕 Type 107 212 316 325 B/X5R X7R B/X5R F/Y5V B/X5R F/Y5V B/X5R 25 16 10 6.3 16 10 50 25 16 10 6.3 50 10 6.3 50 25 16 10 6.3 50 35 10 6.3 25 16 10 VDC 〔3-digit〕 0.1 104 0.22 224 D 0.33 334 0.47 474 D D 0.68 684 1 105 K K K K D D D D D D D 2.2 225 K K D D D D D D D 3.3 335 D D 4.7 475 K K D D D D. K D.K 6.8 685 10 106 D D D.K 22 226 D 47 476 Note：Letters in the table indicate product thickness. ■■ X5R only Temp.char. Code BJ B7 F D D D Temperature characteristics Applicable Temperature Ref. Temp. standard range〔℃〕 〔℃〕 －25～＋85 20 JIS B EIA X5R －55～＋85 25 25 EIA X7R －55～＋125 －25～＋85 20 JIS F EIA Y5V －30～＋85 25 Capacitance Capacitance tolerance〔％〕 change〔％〕 ±10 ±10（K） ±15 ±20（M） ±15 ＋30/－80 ＋80 （Z） －20 ＋22/－82 G D D D D D D D D D D D D D G D D D D D D ●107TYPE 【Temperature Characteristic BJ:B/X5R】 ・0.8mm thickness （A） Rated voltage 50V 35V 25V 16V 10V 6.3V 4V Part number 1 Part number 2 UMK107 BJ474□A UMK107 BJ105□A GMK107 BJ105□A TMK107 BJ224□A TMK107 BJ474□A TMK107 BJ105□A TMK107 BJ225□A EMK107 BJ224□A EMK107 BJ474□A EMK107 BJ105□A EMK107 BJ225□A EMK107 BJ475□A LMK107 BJ224□A LMK107 BJ474□A LMK107 BJ105□A LMK107 BJ225□A LMK107 BJ475□A LMK107 BJ106MA JMK107 BJ225□A JMK107 BJ475□A JMK107 BJ106MA AMK107 BJ106MA AMK107 BJ226MA UMK107ABJ474□A TMK107ABJ225□A EMK107ABJ475□A LMK107BBJ106MA JMK107ABJ106MA AMK107BBJ226MA Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R B/X5R B/X5R B/X5R B/X5R X5R B/X5R*1 B/X5R*1 B/X5R*1 B/X5R X5R B/X5R*1 B/X5R*1 B/X5R*1 B/X5R X5R X5R B/X5R X5R X5R X5R X5R 0.47 1 1 0.22 0.47 1 2.2 0.22 0.47 1 2.2 4.7 0.22 0.47 1 2.2 4.7 10 2.2 4.7 10 10 22 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 ±10, ±20 ±20 ±20 ±20 10 10 5 3.5 3.5 5 10 3.5 3.5 5 10 10 3.5 3.5 5 10 10 10 10 10 10 10 10 0.8＋0.15/－0.05 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8＋0.15/－0.05 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8＋0.15/－0.05 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8＋0.2/－0 0.8±0.1 0.8±0.1 0.8＋0.15/－0.05 0.8±0.1 0.8＋0.2/－0 R R R R/W R R R R/W R R R R R/W R R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R B/X5R X5R X5R B/X5R X5R X5R 1 1 1 2.2 4.7 1 2.2 4.7 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 ±10, ±20 ±20 10 10 10 10 10 10 10 10 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 R R R R R R R R HALT % Rated voltage 150% 150% 150% 200% 150% 150% 150% 200% 200% 150% 150% 150% 200% 200% 200% 150% 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） D Special code：L HALT % Rated voltage 150% 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note D Special code：L HALT % Rated voltage 150% 150% 150% 150% 150% 150% 150% 200% 200% 150% 150% 200% 200% 150% Internal code （P/N 1） Note Note CAPACITORS ■ REPRESENTATIVE PART NUMBERS D D D ・0.45mm thickness （K） Rated voltage 25V 16V 10V 6.3V Part number 1 TMK107 BJ105□K EMK107 BJ105□K LMK107 BJ105□K LMK107 BJ225□K LMK107 BJ475MK JMK107 BJ105□K JMK107 BJ225□K JMK107 BJ475MK Part number 2 LMK107BBJ475MK Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. 【Temperature Characteristic B7：X7R】 Rated voltage 50V 25V 16V 10V 6.3V Part number 1 Part number 2 UMK107 B7224□A UMK107 B7474□A TMK107 B7474□A TMK107 B7105□A EMK107 B7224□A EMK107 B7474□A EMK107 B7105□A LMK107 B7224□A LMK107 B7474□A LMK107 B7105□A LMK107 B7225□A JMK107 B7224□A JMK107 B7474□A JMK107 B7105□A Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 0.22 0.47 0.47 1 0.22 0.47 1 0.22 0.47 1 2.2 0.22 0.47 1 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 10 10 10 10 3.5 3.5 5 3.5 3.5 5 10 3.5 3.5 5 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 R R R R R/W R R R/W R R R R/W R R R R R Capacitance tolerance code is applied to □ of part number. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc01_e-01 11 5 ■ REPRESENTATIVE PART NUMBERS 【Temperature Characteristic F：Y5V】 Rated voltage 50V 25V 16V 10V Part number 1 UMK107 TMK107 EMK107 EMK107 EMK107 EMK107 LMK107 LMK107 Part number 2 F104ZA F474ZA F224ZA F474ZA F105ZA F225ZA F105ZA F225ZA Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V 0.1 0.47 0.22 0.47 1 2.2 1 2.2 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 7 7 7 7 16 16 16 16 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 R/W R/W R/W R/W R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R* B/X5R*1 B/X5R*1 B/X5R B/X5R X5R B/X5R*1 B/X5R*1 X5R B/X5R*1 B/X5R*1 X5R X5R B/X5R X5R*1 X5R X5R 0.1 0.22 0.47 1 2.2 4.7 2.2 4.7 10 2.2 4.7 10 22 4.7 10 22 47 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 ±10, ±20 ±20 ±20 3.5 3.5 3.5 5 5 10 5 5 10 5 5 10 10 5 10 10 10 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25＋0.15/－0.05 1.25±0.1 1.25＋0.15/－0.05 1.25＋0.15/－0.05 1.25±0.1 1.25＋0.15/－0.05 1.25＋0.15/－0.05 1.25＋0.2/－0 1.25＋0.15/－0.05 1.25＋0.15/－0.05 1.25＋0.15/－0.05 1.25＋0.2/－0 R/W R/W R/W R/W R R R R R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R B/X5R B/X5R B/X5R X5R B/X5R*1 B/X5R*1 B/X5R X5R B/X5R*1 B/X5R*1 B/X5R X5R X5R X5R X5R 1 0.47 1 2.2 4.7 1 2.2 4.7 10 1 2.2 4.7 10 4.7 10 22 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 10 3.5 5 5 10 5 5 10 10 3.5 5 10 10 10 10 10 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 150% 150% 150% 150% 150% 200% 150% 150% 200% 200% 200% 150% 200% 200% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 200% 200% 150% 150% 200% 200% 150% 150% 200% 200% 200% 150% 200% 200% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% Internal code （P/N 1） ●212TYPE 【Temperature Characteristic BJ：B/X5R】 ・1.25mm thickness （G） Rated voltage 50V 25V 16V 10V 6.3V Part number 1 UMK212 BJ104□G UMK212 BJ224□G UMK212 BJ474□G UMK212 BJ105□G TMK212 BJ225□G TMK212 BJ475□G EMK212 BJ225□G EMK212 BJ475□G EMK212 BJ106□G LMK212 BJ225□G LMK212 BJ475□G LMK212 BJ106□G LMK212 BJ226MG JMK212 BJ475□G JMK212 BJ106□G JMK212 BJ226MG JMK212 BJ476MG Part number 2 1 TMK212ABJ475□G EMK212ABJ475□G EMK212ABJ106□G LMK212ABJ475□G LMK212ABJ106□G LMK212BBJ226MG JMK212ABJ475□G JMK212ABJ106□G JMK212ABJ226MG JMK212BBJ476MG ・0.85mm thickness （D） Rated voltage 50V 25V 16V 10V 6.3V Part number 1 Part number 2 UMK212 BJ105□D TMK212 BJ474□D TMK212 BJ105□D TMK212 BJ225□D TMK212 BJ475□D EMK212 BJ105□D EMK212 BJ225□D EMK212 BJ475□D EMK212 BJ106□D LMK212 BJ105□D LMK212 BJ225□D LMK212 BJ475□D LMK212 BJ106□D JMK212 BJ475□D JMK212 BJ106□D JMK212 BJ226MD UMK212ABJ105□D TMK212ABJ225□D TMK212BBJ475□D EMK212ABJ225□D EMK212ABJ106□D LMK212ABJ106□D JMK212ABJ106□D JMK212ABJ226MD D D D ・0.45mm thickness （K） Rated voltage 10V 6.3V Part number 1 Part number 2 Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave LMK212 BJ475□K JMK212 BJ475□K JMK212 BJ106MK LMK212ABJ475□K JMK212ABJ475□K JMK212ABJ106MK X5R X5R X5R 4.7 4.7 10 ±10, ±20 ±10, ±20 ±20 10 10 10 0.45±0.05 0.45±0.05 0.45±0.05 R R R Note Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 6 11 mlcc01_e-01 ■ REPRESENTATIVE PART NUMBERS 【Temperature Characteristic B7：X7R】 ・1.25mm thickness （G） Rated voltage 50V 35V 25V 16V 6.3V Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave UMK212 B7104□G UMK212 B7224□G UMK212 B7474□G UMK212 B7105□G GMK212 B7105□G TMK212 B7105□G TMK212 B7225□G TMK212 B7475□G EMK212 B7105□G EMK212 B7225□G EMK212 B7475□G LMK212 B7105□G LMK212 B7225□G LMK212 B7475□G LMK212 B7106MG JMK212 B7106□G X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 0.1 0.22 0.47 1 1 1 2.2 4.7 1 2.2 4.7 1 2.2 4.7 10 10 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 3.5 3.5 3.5 10 3.5 3.5 10 10 3.5 10 10 3.5 5 10 10 10 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25＋0.15/－0.05 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25＋0.15/－0.05 1.25＋0.15/－0.05 R/W R/W R/W R/W R/W R/W R R R/W R R R/W R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R 0.47 1 2.2 1 2.2 4.7 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 5 5 3.5 5 10 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R/W R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V 0.47 1 2.2 4.7 10 10 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 7 7 7 9 16 16 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 R/W R/W R/W R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V F/Y5V 0.22 2.2 4.7 ＋80/－20 ＋80/－20 ＋80/－20 7 9 16 0.85±0.1 0.85±0.1 0.85±0.1 R/W R R Part number 2 Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave EMK316ABJ226ML B/X5R*1 X5R B/X5R*1 B/X5R X5R*1 B/X5R*1 B/X5R B/X5R*1 B/X5R B/X5R*1 B/X5R X5R B/X5R*1 B/X5R X5R X5R X5R 1 4.7 2.2 4.7 10 2.2 4.7 10 22 10 22 47 10 22 47 100 100 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 ±20 ±20 ±10, ±20 ±10, ±20 ±20 ±20 ±20 3.5 10 3.5 5 5 3.5 5 5 10 5 10 10 5 10 10 10 10 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 R R R R R R/W R R R R R R R R R R R Part number 2 TMK212AB7475□G LMK212AB7106MG JMK212AB7106□G HALT % Rated voltage 200% 150% 150% 150% 150% 150% 150% 150% 200% 150% 150% 200% 200% 150% 150% 150% Internal code （P/N 1） HALT % Rated voltage 200% 200% 150% 200% 200% 150% Internal code （P/N 1） HALT % Rated voltage 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 150% 200% 150% 150% 200% 200% 150% 150% 200% 150% 150% 200% 200% 200% 150% 150% Internal code （P/N 1） Note Note R D CAPACITORS 10V Temp. char. Part number 1 D ・0.85mm thickness （D） Rated voltage 16V 10V Part number 1 EMK212 B7474□D EMK212 B7105□D EMK212 B7225□D LMK212 B7105□D LMK212 B7225□D LMK212 B7475□D Part number 2 EMK212AB7225□D LMK212AB7225□D LMK212AB7475□D Note R Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic F：Y5V】 ・1.25mm thickness （G） Rated voltage Part number 1 50V UMK212 UMK212 EMK212 LMK212 LMK212 JMK212 16V 10V 6.3V Part number 2 F474ZG F105ZG F225ZG F475ZG F106ZG F106ZG ・0.85mm thickness （D） Rated voltage Part number 1 50V 10V 6.3V UMK212 F224ZD LMK212 F225ZD JMK212 F475ZD Part number 2 ●316Type 【Temperature Characteristic BJ：B/X5R】 ・1.6mm thickness （L） Rated voltage 50V 25V 16V 10V 6.3V 4V Part number 1 UMK316 BJ105□L UMK316 BJ475□L TMK316 BJ225□L TMK316 BJ475□L TMK316 BJ106□L EMK316 BJ225□L EMK316 BJ475□L EMK316 BJ106□L EMK316 BJ226ML LMK316 BJ106□L LMK316 BJ226ML LMK316 BJ476ML JMK316 BJ106□L JMK316 BJ226□L JMK316 BJ476ML JMK316 BJ107ML AMK316 BJ107ML LMK316ABJ226ML LMK316ABJ476ML JMK316ABJ226□L JMK316ABJ476ML JMK316ABJ107ML AMK316ABJ107ML Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc01_e-01 11 7 ■ REPRESENTATIVE PART NUMBERS ・0.85mm thickness （D） Rated voltage 50V 25V 16V 10V 6.3V Part number 1 UMK316 BJ105□D UMK316 BJ225□D UMK316 BJ475□D TMK316 BJ105□D TMK316 BJ225□D TMK316 BJ475□D TMK316 BJ106□D EMK316 BJ225□D EMK316 BJ475□D EMK316 BJ106□D EMK316 BJ226MD LMK316 BJ475□D LMK316 BJ106□D LMK316 BJ226MD JMK316 BJ106□D JMK316 BJ226MD JMK316 BJ476MD Part number 2 UMK316ABJ475□D TMK316ABJ106□D EMK316ABJ226MD LMK316ABJ226MD JMK316ABJ226MD JMK316ABJ476MD Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R B/X5R X5R B/X5R B/X5R X5R X5R B/X5R B/X5R X5R X5R B/X5R B/X5R X5R B/X5R X5R X5R 1 2.2 4.7 1 2.2 4.7 10 2.2 4.7 10 22 4.7 10 22 10 22 47 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 ±20 ±20 3.5 3.5 10 3.5 3.5 5 10 3.5 5 10 10 5 10 10 10 10 10 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R R R R R R R R R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 0.22 0.47 1 2.2 4.7 1 2.2 4.7 10 2.2 10 2.2 4.7 10 22 10 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 2.5 3.5 3.5 10 10 3.5 3.5 10 10 3.5 10 3.5 5 10 10 5 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 R/W R/W R R R R/W R R R R/W R R/W R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V F/Y5V F/Y5V 10 10 10 22 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 9 9 9 16 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V 2.2 4.7 ＋80/－20 ＋80/－20 7 7 1.25±0.1 1.25±0.1 R/W R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V 4.7 10 ＋80/－20 ＋80/－20 9 16 0.85±0.1 0.85±0.1 R R HALT % Rated voltage 150% 150% 150% 200% 150% 150% 150% 200% 200% 150% 150% 200% 200% 150% 200% 150% 150% Internal code （P/N 1） HALT % Rated voltage 200% 200% 200% 150% 150% 200% 200% 200% 150% 200% 200% 200% 200% 200% 150% 200% Internal code （P/N 1） HALT % Rated voltage 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% Internal code （P/N 1） Note Note D D D Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic B7：X7R】 Rated voltage 50V 25V 16V 10V 6.3V Part number 1 UMK316 B7224□L UMK316 B7474□L UMK316 B7105□L UMK316 B7225□L UMK316 B7475□L TMK316 B7105□L TMK316 B7225□L TMK316 B7475□L TMK316 B7106□L EMK316 B7225□L EMK316 B7106□L LMK316 B7225□L LMK316 B7475□L LMK316 B7106□L LMK316 B7226ML JMK316 B7106□L Part number 2 UMK316AB7475□L TMK316AB7475□L TMK316AB7106□L EMK316AB7106□L LMK316AB7106□L LMK316AB7226ML Note D D D D D R Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic F：F/Y5V】 ・1.6mm thickness （L） Rated voltage 35V 25V 16V 10V Part number 1 GMK316 TMK316 EMK316 LMK316 Part number 2 F106ZL F106ZL F106ZL F226ZL ・1.25mm thickness （G） Rated voltage Part number 1 50V 35V UMK316 F225ZG GMK316 F475ZG Part number 2 ・0.85mm thickness （D） Rated voltage Part number 1 10V 6.3V LMK316 F475ZD JMK316 F106ZD Part number 2 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 8 11 mlcc01_e-01 ■ REPRESENTATIVE PART NUMBERS ●325Type 【Temperature Characteristic BJ：B/X5R】 ・2.5mm thickness （M） Rated voltage 50V 25V 16V 10V UMK325 BJ475MM UMK325 BJ106MM TMK325 BJ106MM EMK325 BJ226MM EMK325 BJ476MM LMK325 BJ226MM LMK325 BJ476MM LMK325 BJ107MM JMK325 BJ476MM JMK325 BJ107MM Part number 2 LMK325ABJ107MM JMK325ABJ107MM Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R B/X5R*1 B/X5R X5R B/X5R X5R X5R X5R X5R 4.7 10 10 22 47 22 47 100 47 100 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 5 3.5 5 10 5 10 10 10 10 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.3 2.5±0.2 2.5±0.3 R R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R X5R B/X5R B/X5R*1 B/X5R*1 B/X5R B/X5R*1 B/X5R B/X5R B/X5R*1 B/X5R X5R X5R 2.2 4.7 10 3.3 4.7 10 4.7 10 22 10 22 100 47 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 3.5 10 5 3.5 3.5 5 3.5 3.5 5 3.5 5 10 10 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9＋0.1/－0.2 1.9±0.2 1.9＋0.1/－0.2 1.9＋0.1/－0.2 1.9±0.2 R R R R R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R B/X5R B/X5R B/X5R B/X5R B/X5R 10 10 22 3.3 4.7 10 ±20 ±20 ±20 ±20 ±20 ±20 5 5 10 3.5 5 5 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R R R R R R HALT % Rated voltage 150% 150% 150% 150% 150% 200% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% 150% 150% 200% 200% 200% 200% 200% 150% 200% 200% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 200% 200% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 150% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 150% 200% 150% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% Internal code （P/N 1） Note ・1.9mm thickness （Y, N） Rated voltage 35V 25V 16V 10V 6.3V Part number 1 Part number 2 GMK325 BJ225MN GMK325 BJ475MN GMK325 BJ106MN TMK325 BJ335MN TMK325 BJ475MN TMK325 BJ106MN EMK325 BJ475MN EMK325 BJ106MN LMK325 BJ226MY LMK325 BJ106MN JMK325 BJ226MY JMK325 BJ107MY JMK325 BJ476MN CAPACITORS 6.3V Part number 1 ・0.85mm thickness （D） Rated voltage 25V 16V 10V Part number 1 Part number 2 TMK325 BJ106MD EMK325 BJ106MD EMK325 BJ226MD LMK325 BJ335MD LMK325 BJ475MD LMK325 BJ106MD *1 We may provide X7R for some itemes according to the individual specification. 【Temperature Characteristic B7：X7R】 ・2.5mm thickness （M） Rated voltage Part number 1 50V 25V 16V 10V 6.3V UMK325 B7475MM TMK325 B7226MM EMK325 B7226MM LMK325 B7476MM JMK325 B7476MM Part number 2 Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R 4.7 22 22 47 47 ±20 ±20 ±20 ±20 ±20 5 10 10 10 10 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R 3.3 4.7 4.7 10 10 ±20 ±20 ±20 ±20 ±20 3.5 3.5 3.5 3.5 3.5 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V F/Y5V 22 22 47 ＋80/－20 ＋80/－20 ＋80/－20 16 16 16 1.9±0.2 1.9±0.2 1.9±0.2 R R R R R R R ・1.9mm thickness （Y, N） Rated voltage 25V 16V 10V Part number 1 Part number 2 TMK325 B7335MN TMK325 B7475MN EMK325 B7475MN EMK325 B7106MN LMK325 B7106MN 【Temperature Characteristic F：F/Y5V】 Rated voltage Part number 1 16V 10V 6.3V EMK325 F226ZN LMK325 F226ZN JMK325 F476ZN Part number 2 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc01_e-01 11 9 ■ ELECTRICAL CHARACTERISTICS ●Example of Impedance ESR vs. Frequency characteristics ■ Taiyo Yuden multilayer ceramic capacitor EMK212ABJ106KG EMK212 BJ106KG TMK107 BJ105KA JMK107ABJ106MA JMK107 BJ106MA JMK212ABJ226MG JMK212 BJ226MG TMK316 BJ106KL JMK316ABJ476ML JMK316 BJ476ML JMK316ABJ107ML JMK316 BJ107ML GMK325 BJ106MN EMK325 BJ476MM JMK325 BJ107MY UMK107 F104ZA LMK107 F105ZA LMK107 F225ZA UMK212 F224ZD UMK212 F105ZG LMK212 F106ZG UMK316 F225ZG GMK316 F106ZL LMK316 F226ZL AMK107BBJ226MA AMK107 BJ226MA JMK325 F476ZN ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 10 11 mlcc01_e-01 CAPACITORS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc01_e-01 11 11 STANDARD MULTILAYER CERAMIC CAPACITORS （CLASS1:TEMPERATURE COMPENSATING TYPE） REFLOW ■ FEATURES ■ APPLICATIONS ◦Improved higher density mounting. ◦General electronic equipment ◦Monolithic structure provides higher reliability. ◦Communication equipment （cellular phone, wireless applications, etc.） ◦A wide range of capacitance values available in standard case sizes. ■ PART NUMBER U M K ❶ ❷ 0 ❸ ❶Rated voltage 〔VDC〕 E 16 T 25 U 50 M 1 K ❷Series name Multilayer ceramic capacitor 5 △ C H ❹ ❺ ❸End termination Plated ❹Dimension Type （inch） L×W 〔mm〕 042 （01005） 0.4×0.2 063 （0201） 0.6×0.3 105 （0402） 1.0×0.5 1 0 ❻ 1 ❼ ❻Temperature characteristics〔ppm/℃〕 C□：0 CH、CJ、CK Tolerance R□：－220 RH H：±60 S□：－330 SH、SJ、SK J：±120 T□：－470 TJ、TK K：±250 U□：－750 UJ、UK SL：＋350～－1000 □＝Tolerance V － F △ ❽ ❾ ❽Capacitance tolerance C ±0.25pF D ±0.5pF F ±1pF J ±5% K ±10% ❼Nominal capacitance 〔pF〕 example 0R5 0.5 010 1 100 10 ※R＝decimal point ❺Dimension tolerance △ Standard △＝Blank space J ❿ ⓫ ⓬ ❿Special code － Standard ⓫Packaging φ178mm Taping （2mm pitch） φ178mm Taping W （1mm pitch, 042 Type） F ❾Thickness〔mm〕 C 0.2 0.3 P, T W, V 0.5 ⓬Internal code △ Standard △＝Blank space ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Dimension [mm] Type □MK042 （01005 inch） □MK063 （0201 inch） □MK105 （0402 inch） T e Standard quantity [pcs] Paper tape Embossed tape L W 0.4±0.02 0.2±0.02 0.2±0.02 C 0.1±0.03 － 40000 0.6±0.03 0.3±0.03 0.3±0.03 P, T 0.15±0.05 15000 － 1.0±0.05 0.5±0.05 0.5±0.05 W,V 0.25±0.10 10000 － ■ AVAILABLE CAPACITANCE RANGE Cap ［pF］ Type 042 C□ 063 C□ 105 U□ VDC 16V 50V 25V ［3-digit］ 0.5 0R5 1 010 1.5 1R5 2 020 P 3 030 4 040 5 050 C T 6 060 7 070 8 080 9 090 10 100 12 120 15 150 18 180 22 220 T 27 270 33 330 39 390 C 47 470 56 560 68 680 82 820 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 Note: Letters in the table indicate thickness. C□ U□ SL R□ S□ T□ W W 50V W W W V V V ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 12 11 mlcc02_e-01 ■ REPRESENTATIVE PART NUMBERS ●042TYPE Class1【C△ characteristic】 Rated voltage 16V Part number 1 Part number 2 Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CK CK CK CK CJ CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note Internal code （P/N 1） Note CAPACITORS EMK042 CK0R5CC EMK042 CK010CC EMK042 CK1R5CC EMK042 CK020CC EMK042 CJ030CC EMK042 CH040CC EMK042 CH050CC EMK042 CH060DC EMK042 CH070DC EMK042 CH080DC EMK042 CH090DC EMK042 CH100DC EMK042 CH120JC EMK042 CH150JC EMK042 CH180JC EMK042 CH220JC EMK042 CH270JC EMK042 CH330JC EMK042 CH390JC EMK042 CH470JC EMK042 CH560JC EMK042 CH680JC EMK042 CH820JC EMK042 CH101JC Temp. char. Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ●063TYPE Class1【C△ characteristic】 Rated voltage 50V Part number 1 Part number 2 UMK063 CK0R5CP UMK063 CK010CP UMK063 CK1R5CP UMK063 CK020CP UMK063 CJ030CP UMK063 CH040CP UMK063 CH050CP UMK063 CH060DP UMK063 CH070DP UMK063 CH080DT UMK063 CH090DT UMK063 CH100DT UMK063 CH120JT UMK063 CH150JT UMK063 CH180JT UMK063 CH220JT UMK063 CH270JT UMK063 CH330JT UMK063 CH390JT UMK063 CH470JT UMK063 CH560JT UMK063 CH680JT UMK063 CH820JT UMK063 CH101JT Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CK CK CK CK CJ CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Special code:G Special code:G Special code:G Special code:G Special code:G Special code:G Special code:G Special code:G Special code:G Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【U△ characteristic】 Rated voltage 25V Part number 1 TMK063 UK0R5CT ＴMK063 UK010CT ＴMK063 UK1R5CT ＴMK063 UK020CT ＴMK063 UK030CT TMK063 UJ040CT TMK063 UJ050CT TMK063 UJ060DT TMK063 UJ070DT TMK063 UJ080DT TMK063 UJ090DT TMK063 UJ100DT TMK063 UJ120JT TMK063 UJ150JT Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave UK UK UK UK UK UJ UJ UJ UJ UJ UJ UJ UJ UJ 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc02_e-01 11 13 ■ REPRESENTATIVE PART NUMBERS ●105TYPE Class1【C△ characteristic】 Rated voltage 50V Part number 1 Part number 2 UMK105 CK0R5CW UMK105 CK010CW UMK105 CK1R5CW UMK105 CK020CW UMK105 CJ030CW UMK105 CH040CW UMK105 CH050CW UMK105 CH060DW UMK105 CH070DW UMK105 CH080DV UMK105 CH090DV UMK105 CH100DV UMK105 CH120JV UMK105 CH150JV UMK105 CH180JV UMK105 CH220JV UMK105 CH270JV UMK105 CH330JV UMK105 CH390JV UMK105 CH470JV UMK105 CH560JV UMK105 CH680JV UMK105 CH820JV UMK105 CH101JV UMK105 CH121JV UMK105 CH151JV UMK105 CH181JV UMK105 CH221JV UMK105 CH271JV UMK105 CH331JV Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CK CK CK CK CJ CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note Internal code （P/N 1） Note Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【U△ characteristic】 Rated voltage 50V Part number 1 UMK105 UK0R5CW UMK105 UK010CW UMK105 UK1R5CW UMK105 UK020CW UMK105 UK030CW UMK105 UJ040CW UMK105 UJ050CW UMK105 UJ060DW UMK105 UJ070DW UMK105 UJ080DW UMK105 UJ090DW UMK105 UJ100DW UMK105 UJ120JW UMK105 UJ150JW UMK105 UJ180JW UMK105 UJ220JV UMK105 UJ270JV UMK105 UJ330JV UMK105 UJ390JV UMK105 UJ470JV UMK105 UJ560JV UMK105 UJ680JV UMK105 UJ820JV UMK105 UJ101JV UMK105 UJ121JV UMK105 UJ151JV UMK105 UJ181JV UMK105 UJ221JV UMK105 UJ271JV UMK105 UJ331JV Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave UK UK UK UK UK UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ UJ 0.5 1 1.5 2 3 4 5 6 7 8 9 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.25pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±0.5pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 430 440 460 480 500 520 540 560 580 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 14 11 mlcc02_e-01 ■ REPRESENTATIVE PART NUMBERS Class1【SL characteristic】 Rated voltage Part number 1 50V Part number 2 UMK105 SL121JV UMK105 SL151JV UMK105 SL181JV UMK105 SL221JV UMK105 SL271JV UMK105 SL331JV Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave SL SL SL SL SL SL 120 150 180 220 270 330 ±5% ±5% ±5% ±5% ±5% ±5% 1000 1000 1000 1000 1000 1000 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note Internal code （P/N 1） Note Internal code （P/N 1） Note Internal code （P/N 1） Note Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【RH characteristic】 50V Part number 1 Part number 2 UMK105 RH5R6JW UMK105 RH6R8JW UMK105 RH8R2JW UMK105 RH100JW UMK105 RH120JW UMK105 RH150JW UMK105 RH180JW UMK105 RH200JW Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave RH RH RH RH RH RH RH RH 5.6 6.8 8.2 10 12 15 18 20 ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 512 536 564 600 640 700 760 800 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% CAPACITORS Rated voltage Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【S△ characteristic】 Rated voltage 50V Part number 1 Part number 2 UMK105 SK0R5BW UMK105 SK010BW UMK105 SK1R2BW UMK105 SK1R5BW UMK105 SK1R8BW UMK105 SK2R2JW UMK105 SK2R7JW UMK105 SJ3R3JW UMK105 SJ3R9JW UMK105 SH4R7JW UMK105 SH5R6JW UMK105 SH6R8JW UMK105 SH8R2JW UMK105 SH100JW UMK105 SH120JW UMK105 SH150JW UMK105 SH180JW UMK105 SH200JW Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave SK SK SK SK SK SK SK SJ SJ SH SH SH SH SH SH SH SH SH 0.5 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 20 ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 424 430 436 444 454 466 478 494 512 536 564 600 640 700 760 800 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. Class1【T△ characteristic】 Rated voltage 50V Part number 1 UMK105 TK0R5BW UMK105 TK010BW UMK105 TK1R2BW UMK105 TK1R5BW UMK105 TK1R8BW UMK105 TK2R2JW UMK105 TK2R7JW UMK105 TK3R3JW UMK105 TK3R9JW UMK105 TJ4R7JW UMK105 TJ5R6JW UMK105 TJ6R8JW UMK105 TJ8R2JW UMK105 TJ100JW UMK105 TJ120JW UMK105 TJ150JW UMK105 TJ180JW UMK105 TJ200JW Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave TK TK TK TK TK TK TK TK TK TJ TJ TJ TJ TJ TJ TJ TJ TJ 0.5 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 20 ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±0.1pF ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% 410 420 424 430 436 444 454 466 478 494 512 536 564 600 640 700 760 800 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Note: Please contact Taiyo Yuden sales channels about items (capacitance and tolerance) other than listed above. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc02_e-01 11 15 STANDARD MULTILAYER CERAMIC CAPACITORS （CLASS2 :HIGH DIELECTRIC CONSTANT TYPE） REFLOW ■ FEATURES ■ APPLICATIONS ◦Improved higher density mounting. ◦General electronic equipment ◦Monolithic structure provides higher reliability. ◦Communication equipment （cellular phone, wireless applications, etc.） ◦A wide range of capacitance values available in standard case sizes. ■ PART NUMBER L M K ❶ ❷ ❶Rated voltage 〔VDC〕 A 4 J 6.3 L 10 E 16 T 25 G 35 U 50 1 ❸ ❸End termination K Plated ❷Series name Multilayer ceramic M capacitor 0 5 △ B ❹ ❺ J 1 0 ❻ 4 K V － F △ ❽ ❾ ❼ ❻Temperature characteristics code ❹Dimension Type （inch） L×W 〔mm〕 042 （01005） 0.4×0.2 063 （0201） 0.6×0.3 105 （0402） 1.0×0.5 BJ B X5R B7 X7R ❽Capacitance tolerance K ±10% M ±20% ＋80 Z －20 % F Y5V △F ❼Nominal capacitance 〔pF〕 example 102 1000 223 22000 ⓫ ⓬ ❿Special code － Standard ⓫Packaging φ178mm Taping （2mm pitch） φ178mm Taping W （1mm pitch, 042 Type） F △＝Blank space ❺Dimension tolerance［mm］ Code Type L W T △ ALL Standard Standard Standard A 1.0±0.1 0.5±0.1 0.5±0.1 105 B 1.0＋0.15/－0.05 0.5＋0.15/－0.05 0.5＋0.15/－0.05 △＝Blank space ❿ ❾Thickness〔mm〕 C 0.2 P 0.3 V 0.5 ⓬Internal code △ Standard △＝Blank space ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Type □MK042 （01005 inch） □MK063 （0201 inch） □MK105 （0402 inch） Dimension [mm] T L W 0.4±0.02 0.2±0.02 0.6±0.03 0.3±0.03 0.5±0.05 1.0±0.05 Standard quantity [pcs] Paper tape Embossed tape e 0.2±0.02 － C 0.1±0.03 40000 0.3±0.03 P 0.15±0.05 15000 － 0.2±0.02 0.3±0.03 0.5±0.05 C P V 0.25±0.10 20000 15000 10000 － － － ■ AVAILABLE CAPACITANCE RANGE ●Multilayer Ceramic Capacitors Type Cap ［pF］ 042 X7R B/X5R X7R ●Low Profile Multilayer Ceramic Capacitors 063 B/X5R 105 B/X5R X7R VDC 10 10 6.3 25 16 25 16 10 6.3 4 〔3-digit〕 C C P P 100 101 C C P P 150 151 C C P P 220 221 C C P P 330 331 C C P P 470 471 C C P P 680 681 C C P P 1000 102 C C P P P 1500 152 C C P P P 2200 222 C C P P P 3300 332 C C P P P 4700 472 C C P P P 6800 682 C C P P P 10000 103 15000 153 C P P 22000 223 P P 33000 333 P P 47000 473 P P 68000 683 P P 100000 104 P P P 220000 224 P 330000 334 P 470000 474 1000000 105 2200000 225 3300000 335 4700000 475 F/Y5V 50 25 16 10 6.3 50 35 25 16 10 6.3 4 50 25 16 10 6.3 V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V Cap ［pF］ 105 B/X5R Type VDC 25 16 10 6.3 〔3-digit〕 100 101 150 151 220 221 330 331 470 471 680 681 1000 102 1500 152 2200 222 3300 332 4700 472 6800 682 P 10000 103 15000 153 22000 223 33000 333 47000 473 68000 683 P C 100000 104 P C 220000 224 330000 334 P C 470000 474 P 1000000 105 2200000 225 3300000 335 4700000 475 Note：Letters in the table indicate product thickness. ■■ X5R only Temp.char.Code BJ B7 F Applicable standard JIS EIA EIA JIS EIA B X5R X7R F Y5V Temperature characteristics Temperature range 〔℃〕 －25～＋85 －55～＋85 －55～＋125 －25～＋85 －30～＋85 Ref. Temp. 〔℃〕 20 25 25 20 25 Capacitance change 〔％〕 ±10 ±15 ±15 ＋30/－80 ＋22/－82 Capacitance tolerance 〔％〕 ±10（K） ±20（M） ＋80（Z） －20 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 16 11 mlcc03_e-01 ■ REPRESENTATIVE PART NUMBERS ●042TYPE （01005 case size） 【Temperature Characteristic BJ:B/X5R】 Rated voltage 10V Part number 2 LMK042 BJ101□C LMK042 BJ151□C LMK042 BJ221□C LMK042 BJ331□C LMK042 BJ471□C LMK042 BJ681□C LMK042 BJ102□C LMK042 BJ152□C LMK042 BJ222□C LMK042 BJ332□C LMK042 BJ472□C LMK042 BJ682□C LMK042 BJ103□C JMK042 BJ152□C JMK042 BJ222□C JMK042 BJ332□C JMK042 BJ472□C JMK042 BJ682□C JMK042 BJ103□C JMK042 BJ223□C Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 X5R X5R X5R X5R X5R X5R B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 X5R 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 1500 2200 3300 4700 6800 10000 22000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 5 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 150% 150% 200% 150% 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note CAPACITORS 6.3V Part number 1 Capacitance tolerance code is applied to □ of part number. *1 We may provide X7S/X7R for some items according to the individual specification. 【Temperature Characteristic B7：X7R】 Rated voltage Part number 1 10V Part number 2 LMK042 B7101□C LMK042 B7151□C LMK042 B7221□C LMK042 B7331□C LMK042 B7471□C LMK042 B7681□C LMK042 B7102□C Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R 100 150 220 330 470 680 1000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 5 5 5 5 5 5 5 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 0.2±0.02 R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 1500 2200 3300 4700 6800 10000 22000 33000 47000 68000 100000 220000 22000 33000 47000 68000 100000 220000 220000 330000 470000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±20 ±20 ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5 5 5 5 5 5 5 5 5 5 5 5 7.5 7.5 7.5 10 10 10 7.5 7.5 7.5 10 10 10 10 10 10 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R Capacitance tolerance code is applied to □ of part number. ●063TYPE （0201 case size） 【Temperature Characteristic BJ:B/X5R】 Rated voltage 25V 16V 10V 6.3V 4V Part number 1 TMK063 BJ101□P TMK063 BJ151□P TMK063 BJ221□P TMK063 BJ331□P TMK063 BJ471□P TMK063 BJ681□P TMK063 BJ102□P TMK063 BJ152□P TMK063 BJ222□P TMK063 BJ332□P TMK063 BJ472□P TMK063 BJ682□P TMK063 BJ103□P EMK063 BJ152□P EMK063 BJ222□P EMK063 BJ332□P EMK063 BJ472□P EMK063 BJ682□P EMK063 BJ103□P LMK063 BJ223□P LMK063 BJ333□P LMK063 BJ473□P LMK063 BJ683□P LMK063 BJ104□P LMK063 BJ224MP JMK063 BJ223□P JMK063 BJ333□P JMK063 BJ473□P JMK063 BJ683□P JMK063 BJ104□P JMK063 BJ224MP AMK063 BJ224MP AMK063 BJ334MP AMK063 BJ474MP Part number 2 1 B/X5R* B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R B/X5R B/X5R B/X5R B/X5R B/X5R B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R X5R X5R X5R X5R X5R B/X5R X5R X5R X5R X5R X5R X5R X5R X5R *2 Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some items according to the individual specification. *2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc03_e-01 11 17 ■ REPRESENTATIVE PART NUMBERS 【Temperature Characteristic B7：X7R】 Rated voltage 25V 16V Part number 1 Part number 2 TMK063 B7101□P TMK063 B7151□P TMK063 B7221□P TMK063 B7331□P TMK063 B7471□P TMK063 B7681□P TMK063 B7102□P EMK063 B7152□P EMK063 B7222□P EMK063 B7332□P EMK063 B7472□P EMK063 B7682□P EMK063 B7103□P Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 100 150 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 5 5 5 5 5 5 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R B/X5R*1 B/X5R X5R B/X5R B/X5R X5R X5R B/X5R X5R X5R X5R X5R X5R X5R 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 100000 15000 22000 33000 47000 100000 15000 22000 33000 47000 68000 100000 220000 1000000 100000 220000 470000 1000000 220000 470000 1000000 2200000 4700000 3300000 4700000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±20 ±20 ±20 ±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 5 3.5 3.5 3.5 3.5 5 3.5 3.5 3.5 3.5 5 5 5 10 5 5 10 10 5 10 10 10 10 10 10 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5＋0.15/－0.05 0.5±0.05 0.5±0.1 R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 150% 200% 150% 200% 200% 150% 150% 150% 200% 200% 200% 200% 200% 150% 150% 150% 200% 150% 150% 150% 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note Capacitance tolerance code is applied to □ of part number. ●105TYPE （0402 case size） 【Temperature Characteristic BJ:B/X5R】 ・0.5mm thickness （V） Rated voltage 50V 35V 25V 16V 10V 6.3V 4V Part number 1 UMK105 BJ221□V UMK105 BJ331□V UMK105 BJ471□V UMK105 BJ681□V UMK105 BJ102□V UMK105 BJ152□V UMK105 BJ222□V UMK105 BJ332□V UMK105 BJ472□V UMK105 BJ682□V UMK105 BJ103□V GMK105 BJ104□V TMK105 BJ153□V TMK105 BJ223□V TMK105 BJ333□V TMK105 BJ473□V TMK105 BJ104□V EMK105 BJ153□V EMK105 BJ223□V EMK105 BJ333□V EMK105 BJ473□V EMK105 BJ683□V EMK105 BJ104□V EMK105 BJ224□V EMK105 BJ105□V LMK105 BJ104□V LMK105 BJ224□V LMK105 BJ474□V LMK105 BJ105□V JMK105 BJ224□V JMK105 BJ474□V JMK105 BJ105□V JMK105 BJ225MV JMK105 BJ475MV AMK105 BJ335MV AMK105 BJ475MV Part number 2 JMK105BBJ475MV AMK105ABJ475MV D *2 Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some items according to the individual specification. *2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact Taiyo Yuden sales channels. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 18 11 mlcc03_e-01 ■ REPRESENTATIVE PART NUMBERS ・0.3mm thickness （P） Rated voltage 25V 16V 6.3V Part number 1 Part number 2 TMK105 BJ103□P TMK105 BJ104□P TMK105 BJ224□P EMK105 BJ474□P JMK105 BJ105□P Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R X5R X5R X5R X5R 10000 100000 220000 470000 1000000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 5 10 10 10 10 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R X5R 100000 220000 470000 ±10, ±20 ±10, ±20 ±10, ±20 10 10 10 0.2±0.02 0.2±0.02 0.2±0.02 R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 220 330 470 680 1000 1500 2200 3300 4700 6800 10000 1500 2200 3300 4700 6800 10000 22000 47000 100000 22000 47000 100000 220000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 2.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 5 3.5 3.5 5 5 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V F/Y5V 10000 22000 47000 100000 220000 470000 1000000 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 ＋80/－20 5 5 7 9 11 12.5 20 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R HALT % Rated voltage 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 200% 200% 200% 200% 200% 200% 200% 200% 150% 200% 200% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 150% Internal code （P/N 1） Note ・0.2mm thickness （C） Rated voltage Part number 2 LMK105 BJ104□C JMK105 BJ224□C JMK105 BJ474□C Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic B7:X7R】 Rated voltage 50V 25V 16V 10V 6.3V Part number 1 Part number 2 UMK105 B7221□V UMK105 B7331□V UMK105 B7471□V UMK105 B7681□V UMK105 B7102□V UMK105 B7152□V UMK105 B7222□V UMK105 B7332□V UMK105 B7472□V UMK105 B7682□V UMK105 B7103□V TMK105 B7152□V TMK105 B7222□V TMK105 B7332□V TMK105 B7472□V TMK105 B7682□V TMK105 B7103□V EMK105 B7223□V EMK105 B7473□V EMK105 B7104□V LMK105 B7223□V LMK105 B7473□V LMK105 B7104□V JMK105 B7224□V CAPACITORS 10V 6.3V Part number 1 Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic F:Y5V】 Rated voltage 50V 25V 16V 10V 6.3V Part number 1 UMK105 TMK105 EMK105 EMK105 LMK105 JMK105 JMK105 F103ZV F223ZV F473ZV F104ZV F224ZV F474ZV F105ZV Part number 2 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc03_e-01 11 19 MULTILAYER CERAMIC CAPACITORS FOR HIGH FREQUENCY APPLICATIONS（1GHz+） REFLOW ■ FEATURES ■ APPLICATIONS ◦Q value in the high frequency range (1 GHz+) is superior compared to other types of multilayer capacitors. ◦Suitable for those high frequency applications in which a capacitor with both a high Q-value and small size is required such as portable communications and other wireless applications. VCO, TCXO etc. ◦The 1005(0402) case size is designed for high density mounting and weight reduction in various applications. ◦Adjustment of characteristics in high frequency circuit ■ PART NUMBER U V K ❶ ❷ ❸ ❶Rated voltage 〔VDC〕 E 16 U 50 V 1 ❹ ❸End termination K Plated ❷Series name Multilayer ceramic capacitor for high frequency 5 △ R H 0 ❺ 4 R ❻ J W － F △ 3 ❼ ❺Dimension tolerance △ Standard △=Blank Space ❻Temperature ❹Dimension Type （inch） L×W〔mm〕 characteristics〔ppm/℃〕 0±60 CH 105 （0402） 1.0×0.5 －220±60 RH ❼Nominal capacitance〔pF〕 example 020 2 4R3 4.3 ※R＝Decimal point ❽ ❽Capacitance tolerance B ±0.1pF J ±5％ ❾ ❿ ⓫ ❿Special code － Standard ❾Thickness〔mm〕 W 0.5 F ⓬ ⓬ Internal code △ Standard △=Blank Space ⓫Packaging φ178mm Taping （2mm pitch） ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Dimension [mm] Type □VK105 （0402 inch） L W T e 1.0±0.05 0.5±0.05 0.5±0.05 0.25±0.1 Standard quantity [pcs] Paper tape Embossed tape 10000 － ■ SPECIFICATIONS Temperature Characteristics Operating Temperature range CH RH －55～＋125℃ Temperature Coefficient range [ppm/℃] 0±60 －220±60 Capacitance Tolerance ●Capacitance vs Q value（Typical for CH characteristic） ±0.1pF （～2.0pF） ±5％（2.2pF～） ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 20 11 mlcc04_e-01 ■ PART NUMBERS Rated Voltage （DC） Part number RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Capacitance 〔pF〕 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 Capacitance tolerance ±0.1pF ±5％ ±0.1pF ±5％ Q （at 1GHz） （min.） 300 300 300 300 300 300 300 300 280 270 260 240 230 210 190 180 170 150 130 120 110 99 84 84 84 300 300 300 300 300 300 280 270 260 240 230 210 190 180 170 150 130 120 110 99 84 84 84 Thickness [mm] Typical Q 0.5±0.05 1200 1200 1200 1100 1100 1000 950 950 930 850 740 710 670 650 610 530 510 460 390 370 360 360 360 340 320 1100 1000 1000 970 950 900 900 740 700 680 640 620 570 480 470 420 360 350 340 340 340 320 310 CAPACITORS □VK105 CH0R3BW □VK105 CH0R4BW □VK105 CH0R5BW □VK105 CH0R6BW □VK105 CH0R7BW □VK105 CH0R8BW □VK105 CH0R9BW □VK105 CH010BW □VK105 CH1R1BW □VK105 CH1R2BW □VK105 CH1R3BW □VK105 CH1R5BW □VK105 CH1R6BW □VK105 CH1R8BW □VK105 CH020BW □VK105 CH2R2JW □VK105 CH2R4JW □VK105 CH2R7JW □VK105 CH030JW □VK105 CH3R3JW □VK105 CH3R6JW □VK105 CH3R9JW □VK105 CH4R3JW □VK105 CH4R7JW E: 16V U: 50V □VK105 CH5R1JW □VK105 RH0R5BW □VK105 RH0R6BW □VK105 RH0R7BW □VK105 RH0R8BW □VK105 RH0R9BW □VK105 RH010BW □VK105 RH1R1BW □VK105 RH1R2BW □VK105 RH1R3BW □VK105 RH1R5BW □VK105 RH1R6BW □VK105 RH1R8BW □VK105 RH020BW □VK105 RH2R2JW □VK105 RH2R4JW □VK105 RH2R7JW □VK105 RH030JW □VK105 RH3R3JW □VK105 RH3R6JW □VK105 RH3R9JW □VK105 RH4R3JW □VK105 RH4R7JW □VK105 RH5R1JW □Please specify the Rated Voltage code. Temperature EHS (Environmental characteristics Hazardous CH RH Substances) ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc04_e-01 11 21 SUPER LOW DISTORTION MULTILAYER CERAMIC CAPACITORS（CFCAPTM） REFLOW ■ FEATURES ■ APPLICATIONS ◦Newly developed dielectric material and the use of nickel for internal electrodes provide superior temperature characteristics with high capacitance, small case size and low cost. ◦Signal line for AV products ◦Analog signal coupling applications ◦PLL circuit of mobile phones ◦Low distortion and low shock noise make these capacitors appropriate for use in analog or digital mobile devices. ◦Good temperature characteristics for time constant circuits, oscillation circuits and filters ◦Superior heat-resistance, high breakdown voltage, and mechanical strength make these capacitors appropriate for replacing film capacitors. ■ PART NUMBER T M K ❶ ❷ 3 ❸ ❶Rated voltage〔VDC〕 U 50 G 35 T 25 E 16 L 10 M J 6.3 ❸End termination K Plated ❷Series name Multilayer ceramic capacitor 1 6 △ S ❹ ❺ Type 105 107 212 316 △ D 1 0 ❻ ❹Dimension （inch） L×W〔mm〕 （0402） 1.0×0.5 （0603） 1.6×0.8 （0805） 2.0×1.25 （1206） 3.2×1.6 ❼ ❻Series symbol SD Standard ❼Nominal capacitance〔μF〕 example 223 0.022 104 0.1 ❺Dimension tolerance Standard 4 ❽Capacitance tolerance K ±10% △＝Blank space K L － T △ ❽ ❾ ❾Thickness 〔mm〕 P 0.3 V 0.5 A 0.8 D 0.85 F 1.15 G 1.25 L 1.6 ❿ ⓫ ❿Special code － Standard ⓬ ⓬Internal code △ Standard △＝Blank space ⓫Packaging φ178mm Taping （4mm pitch） 107, 212, 316 Type φ178mm Taping （2mm pitch） 105 Type T F ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Dimension [mm] Type L W □MK105 （0402 inch） 1.0±0.05 0.5±0.05 □MK107 （0603 inch） 1.6±0.10 0.8±0.10 □MK212 （0805 inch） 2.0±0.10 1.25±0.10 □MK316 （1206 inch） 3.2±0.15 1.6±0.15 T 0.3±0.03 0.5±0.05 Standard quantity [pcs] Paper tape Embossed tape e P V 0.25±0.10 0.8±0.10 A 0.35±0.25 4000 － 0.85±0.10 1.25±0.10 1.15±0.10 1.6±0.20 D G F L 0.5±0.25 4000 － 0.5 ＋0.35/ー0.25 － － 3000 3000 2000 － 10000 ■ AVAILABLE CAPACITANCE RANGE Cap [pF] 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 27000 33000 39000 47000 56000 68000 82000 100000 Type VDC [3-digit] 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 50V 25V 105 SD 16V 107 SD 10V 6.3V 50V 25V 212 SD 16V 10V 50V 35V 316 SD 16V 10V 35V 25V V V V V V V V V V V V P P V V V A A A A A A A A A D D D D D D A A A A A A A A D D G G G D F F D G G G ※Letters in the table indicate thickness. F F F L L ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 22 11 mlcc05_e-01 ■ REPRESENTATIVE PART NUMBERS ●105TYPE ・0.5mm thickness （V） Rated voltage Part number 1 50V Part number 2 25V 16V 10V Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave Standard type 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave Standard type 1500 2700 ±10 ±10 0.1 0.1 0.3±0.03 0.3±0.03 R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note ・0.3mm thickness （P） Rated voltage Part number 1 10V 6.3V LMK105 SD152KP JMK105 SD272KP Part number 2 CAPACITORS UMK105 SD391KV UMK105 SD471KV UMK105 SD561KV TMK105 SD681KV TMK105 SD821KV TMK105 SD102KV TMK105 SD122KV EMK105 SD152KV EMK105 SD182KV EMK105 SD222KV EMK105 SD272KV LMK105 SD332KV LMK105 SD392KV LMK105 SD472KV Temp. char. Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels. ●107TYPE Rated voltage Part number 1 50V Part number 2 UMK107 SD102KA UMK107 SD122KA UMK107 SD152KA UMK107 SD182KA UMK107 SD222KA UMK107 SD272KA UMK107 SD332KA TMK107 SD392KA TMK107 SD472KA EMK107 SD562KA EMK107 SD682KA EMK107 SD822KA EMK107 SD103KA LMK107 SD123KA LMK107 SD153KA LMK107 SD183KA LMK107 SD223KA 25V 16V 10V Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave Standard type 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 R R R R R R R R R R R R R R R R R Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels. ●212TYPE ・1.25mm thickness （G） Rated voltage 35V 10V Part number 1 Part number 2 GMK212 SD183KG GMK212 SD223KG GMK212 SD273KG LMK212 SD683KG LMK212 SD823KG LMK212 SD104KG Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave Standard type 18000 22000 27000 68000 82000 100000 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave Standard type 3900 4700 5600 6800 8200 10000 12000 15000 33000 47000 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R R R R R R R R R R ・0.85mm thickness （D） Rated voltage 50V 35V 16V 10V Part number 1 UMK212 SD392KD UMK212 SD472KD UMK212 SD562KD UMK212 SD682KD UMK212 SD822KD UMK212 SD103KD GMK212 SD123KD GMK212 SD153KD EMK212 SD333KD LMK212 SD473KD Part number 2 Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc05_e-01 11 23 ■ REPRESENTATIVE PART NUMBERS ●316TYPE ・1.6mm thickness （L） Rated voltage Part number 1 25V TMK316 SD823KL TMK316 SD104KL Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave Standard type 82000 100000 ±10 ±10 0.1 0.1 1.6±0.2 1.6±0.2 R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave Standard type 33000 39000 47000 56000 68000 ±10 ±10 ±10 ±10 ±10 0.1 0.1 0.1 0.1 0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 R R R R R HALT % Rated voltage 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% Internal code （P/N 1） Note ・1.15mm thickness （F） Rated voltage 35V 25V Part number 1 Part number 2 GMK316 SD333KF GMK316 SD393KF TMK316 SD473KF TMK316 SD563KF TMK316 SD683KF Note：Capacitance tolerance J (±5%) is also available. Please contact Taiyo Yuden sales channels. ■ ELECTRICAL CHARACTERISTICS ■ Capacitance-temperature characteristics 20 15 SD : Standard Type 10 5 0 -5 -10 -15 -20 -60 -40 -20 0 20 40 60 80 100 120 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 24 11 mlcc05_e-01 CAPACITORS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc05_e-01 11 25 ■ RELIABILITY DATA Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic Capacitors are noted separately. Super Low Distortion Multilayer Ceramic Capacitors（CFCAP） 1. Operating Temperature Range Specified Value －55 to ＋125℃ 2. Storage Temperature Range Specified Value －55 to ＋125℃ 3. Rated Voltage Specified Value 6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC （Between terminals） 4. Dielectric Withstanding Voltage Specified Value 【Test Methods and Remarks】 Applied voltage: Rated voltage×3 Duration: 1 to 5 sec. Charge/discharge current: 50mA max. ５．Insulation Resistance Specified Value 【Test Methods and Remarks】 Applied voltage: Rated voltage Duration: 60±5 sec. Charge/discharge current: 50mA max. 6．Capacitance（Tolerance） Specified Value 【Test Methods and Remarks】 Measuring frequency：1ｋHz±10% Measuring voltage：1±0.2Vrms Bias application: None ７．Dissipation Factor Specified Value 【Test Methods and Remarks】 Measuring frequency：1ｋHz±10% Measuring voltage：1±0.2Vrms Bias application: None No breakdown or damage 10000 MΩ or 500MΩμF, whichever is smaller ±10％ 0.1%max 8．Bending Strength Appearance: No abnormality Capacitance change: ±5% Specified Value 【Test Methods and Remarks】 Warp: 1mm Speed: 0.5mm/second Duration:10 seconds Test board: glass epoxy resin substrate Thickness: 1.6mm Capacitance measurement shall be conducted with the board bent. R-230 9．Adhesive Force of Terminal Electrodes Specified Value 【Test Methods and Remarks】 Applied force: 5N Duration: 30 ±5 seconds 10．Solderability Specified Value 【Test Methods and Remarks】 Eutectic solder Lead-free solder Solder type H60A or H63A Snー3.0Agー0.5Cu Terminal electrodes shall be no exfoliation or a sign of exfoliation. At least 95% of terminal electrode is covered by new solder. Solder temperature 230±5℃ 245±3℃ Duration 4±1 sec. 11．Resistance to Soldering Heat Specified Value Appearance: No abnormality Capacitance change: ±2.5% max. Dissipation factor : Initial value Insulation resistance: Initial value Withstanding voltage（between terminals） : No abnormality 【Test Methods and Remarks】 Solder temp.: 270 ±5℃ Duration: 3 ±0.5 sec. Preheating conditions：80 to 100℃, 2 to 5 min. or 5 to 10 min. 150 to 200℃, 2 to 5 min. or 5 to 10 min. Measurement shall be conducted : 24±2hrs under the standard condition Note1 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc05_reli-R1 11 mlcc05_reli_e-01 ■ RELIABILITY DATA 12．Temperature Cycle （Thermal Shock） Specified Value Appearance: No abnormality Capacitance change: ±2.5% max Dissipation factor : Initial value Insulation resistance: Initial value Withstanding voltage（between terminals） : No abnormality 【Test Methods and Remarks】 ＋0 Conditions for 1 cycle／ Step 1: Minimum operating temperature －3℃ 30±3 min. Step 2: Normal temperature 2 to 3 min. ＋0 Step 3: Maximum operating temperature －3℃ 30±3 min. Step 4: Normal temperature 2 to 3 min. Number of cycles: 5 times Measurement shall be conducted : 24±2hrs under the standard condition Note1 13．Humidity（Steady state） Specified Value Appearance: No abnormality Capacitance change: ±5% max Dissipation factor : 0.5% max Insulation resistance 50MΩμF or 1000MΩ, whichever is smaller 【Test Methods and Remarks】 Temperature:40±2℃ Humidity:90 to 95% RH ＋24 Duration:500 －0 hrs Measurement shall be conducted : 24 ±2hrs under the standard condition Note1 14．Humidity Loading Specified Value Appearance: No abnormality Capacitance change: ±7.5% max Dissipation factor : 0.5% max Insulation resistance: 25MΩμF or 500MΩ, whichever is smaller 【Test Methods and Remarks】 According to JIS C 5102 clause 9.9. Temperature:40±2℃ Humidity:90 to 95% RH ＋24 Duration:500 －0 hrs Applied voltage: Rated voltage Charge/discharge current:50mA max Measurement shall be conducted : 24 ±2hrs under the standard condition Note1 15．High Temperature Loading Specified Value Appearance: No abnormality Capacitance change: ±3% max Dissipation factor : 0.35% max Insulation resistance: 50MΩμF or 1000MΩ, whichever is smaller 【Test Methods and Remarks】 According to JIS C 5102 clause 9.10. Temperature:125±3℃ ＋48 Duration:1000 －0 hrs Applied voltage: Rated voltage x 2 Charge/discharge current:50mA max Measurement shall be conducted : 24 ±2hrs under the standard condition Note1 Note1 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition". ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc05_reli_e-01 11 mlcc05_reli-R2 MEDIUM-HIGH VOLTAGE MULTILAYER CERAMIC CAPACITORS REFLOW ■ FEATURES ■ APPLICATIONS ◦The use of nickel as electrode material prevents migration and provides high reliability. ◦General telephone exchange ◦Inverter ◦Small case sizes with high rated voltage. ◦Wireless and Telecommunication base ◦For DC/DC Converter ■ PART NUMBER H M K ❶ ❷ ❶Rated voltage〔VDC〕 H 100 Q 250 S 630 3 ❸ ❸End termination K Plated ❷Series name Multilayer ceramic M capacitor 1 6 △ B ❹ ❺ Type 107 212 316 325 432 ❹Dimension （inch） L×W［mm］ （0603） 1.6×0.8 （0805） 2.0×1.25 （1206） 3.2×1.6 （1210） 3.2×2.5 （1812） 4.5×3.2 J 1 0 ❻ 4 ❼ ❻Temperature characteristics code B BJ X5R C7 X7S B7 X7R ❺Dimension tolerance △ Standard △＝Blank space K L － T △ ❽ ❾ ❾Thickness 〔mm〕 A 0.8 D 0.85 G 1.25 F 1.15 L 1.6 N 1.9 M 2.5 ❽Special code K ±10% M ±20% ❼Nominal capacitance〔pF〕 example 104 100,000 105 1,000,000 ❿ ⓫ ⓬ ⓬Internal code △ Standard △＝Blank space ❿Special code － Standard ⓫Packaging φ178mm Taping （4mm pitch） T ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Dimension [mm] Type □MK107 （0603 inch） L W T 1.6±0.10 0.8±0.10 □MK212 （0805 inch） 2.0±0.10 1.25±0.10 □MK316 （1206 inch） 3.2±0.15 1.6±0.15 □MK325 （1210 inch） 3.2±0.3 2.5±0.20 □MK432 （1812 inch） 4.5±0.4 3.2±0.30 Standard quantity [pcs] Paper tape Embossed tape e 0.8±0.10 A 0.85±0.10 1.25±0.10 1.15±0.10 1.6±0.20 1.15±0.10 1.9±0.20 D G F L F N 2.5±0.20 M 0.35±0.25 4000 － 0.5±0.25 4000 － 0.5 ＋0.35/ー0.25 － － 3000 3000 2000 0.6±0.3 － 2000 0.9±0.6 － 500 ■ AVAILABLE CAPACITANCE RANGE Cap [μF] Type X7R 100 107 212 X7R B/X5R X7S B/X5R 100 100 100 250 100 250 VDC [3-digit] 0.001 102 A A 0.0015 152 A A 0.0022 222 A A 0.0033 332 A A 0.0047 472 A A 0.0068 682 A A 0.01 103 A A 0.015 153 A A 0.022 223 A A 0.033 333 A A 0.047 473 0.068 683 0.1 104 A A 0.15 154 0.22 224 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 ※Letters in the table indicate thickness. G G G G G G G G D D D D G G G G G G G G G G G G G 316 100 X7R 250 D D D D G G G G G 630 325 B/X5R 100 250 630 F F F F F F F L L L L L L L L L L L L L L 100 X7R 250 630 N N N N F F F F F F F L L L L L L L L L L L L L L F N N N N N N N N N N 432 B/X5R 100 250 630 N F N N N N N N N 100 X7R 250 630 M M M M N N N N N N M 100 M M M M M M B/X5R 250 630 M M M M M M M M M M M ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 26 11 mlcc06_e-01 ■ AVAILABLE CAPACITANCE RANGE Temp.char.Code Applicable standard JIS EIA EIA EIA BJ C7 B7 B X5R X7S X7R Temperature characteristics Temperature range 〔℃〕 －25～＋85 －55～＋85 －55～＋125 －55～＋125 Ref. Temp. 〔℃〕 20 25 25 25 Capacitance change 〔％〕 ±10 ±15 ±22 ±15 Capacitance tolerance 〔％〕 ±10 （K） ±20 （M） ■ REPRESENTATIVE PART NUMBERS ●107TYPE 【Temperature Characteristic BJ:B/X5R】 100V Part number 1 Part number 2 HMK107 BJ102□A HMK107 BJ152□A HMK107 BJ222□A HMK107 BJ332□A HMK107 BJ472□A HMK107 BJ682□A HMK107 BJ103□A HMK107 BJ153□A HMK107 BJ223□A HMK107 BJ333□A HMK107 BJ104□A Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 1000 1500 2200 3300 4700 6800 10000 15000 22000 33000 100000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 150% Internal code （P/N 1） Note CAPACITORS Rated voltage Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. 【Temperature Characteristic B7：X7R, C7：X7S】 Rated voltage 100V Part number 1 Part number 2 HMK107 B7102□A HMK107 B7152□A HMK107 B7222□A HMK107 B7332□A HMK107 B7472□A HMK107 B7682□A HMK107 B7103□A HMK107 B7153□A HMK107 B7223□A HMK107 B7333□A HMK107 C7104□A Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7S 1000 1500 2200 3300 4700 6800 10000 15000 22000 33000 100000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 0.8±0.1 R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 10000 15000 22000 33000 47000 68000 100000 220000 4700 6800 10000 15000 22000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 1000 1500 2200 3300 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 2.5 2.5 2.5 2.5 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R R R R Capacitance tolerance code is applied to □ of part number. ●212TYPE 【Temperature Characteristic BJ：B/X5R】 ・1.25mm thickness （G） Rated voltage 100V 250V Part number 1 Part number 2 HMK212 BJ103□G HMK212 BJ153□G HMK212 BJ223□G HMK212 BJ333□G HMK212 BJ473□G HMK212 BJ683□G HMK212 BJ104□G HMK212 BJ224□G QMK212 BJ472□G QMK212 BJ682□G QMK212 BJ103□G QMK212 BJ153□G QMK212 BJ223□G ・0.85mm thickness （D） Rated voltage 250V Part number 1 QMK212 BJ102□D QMK212 BJ152□D QMK212 BJ222□D QMK212 BJ332□D Part number 2 Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc06_e-01 11 27 ■ REPRESENTATIVE PART NUMBERS 【Temperature Characteristic B7：X7R】 ・1.25mm thickness （G） Rated voltage 100V 250V Part number 1 Part number 2 HMK212 B7103□G HMK212 B7153□G HMK212 B7223□G HMK212 B7333□G HMK212 B7473□G HMK212 B7683□G HMK212 B7104□G HMK212 B7224□G QMK212 B7472□G QMK212 B7682□G QMK212 B7103□G QMK212 B7153□G QMK212 B7223□G Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 10000 15000 22000 33000 47000 68000 100000 220000 4700 6800 10000 15000 22000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 1.25±0.1 R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R 1000 1500 2200 3300 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 2.5 2.5 2.5 2.5 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R* B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 47000 68000 100000 150000 220000 330000 470000 1000000 33000 47000 68000 100000 15000 22000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 R R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave 1000 1500 2200 3300 4700 6800 10000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 120% 120% Internal code （P/N 1） Note HALT % Rated voltage 120% 120% 120% 120% 120% 120% 120% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 120% 120% Internal code （P/N 1） Note ・0.85mm thickness （D） Rated voltage 250V Part number 1 Part number 2 QMK212 B7102□D QMK212 B7152□D QMK212 B7222□D QMK212 B7332□D Capacitance tolerance code is applied to □ of part number. ●316TYPE 【Temperature Characteristic BJ：B/X5R】 ・1.6mm thickness （L） Rated voltage 100V 250V 630V Part number 1 Part number 2 1 HMK316 BJ473□L HMK316 BJ683□L HMK316 BJ104□L HMK316 BJ154□L HMK316 BJ224□L HMK316 BJ334□L HMK316 BJ474□L HMK316 BJ105□L QMK316 BJ333□L QMK316 BJ473□L QMK316 BJ683□L QMK316 BJ104□L SMK316 BJ153□L SMK316 BJ223□L ・1.15mm thickness （F） Rated voltage 630V Part number 1 Part number 2 1 SMK316 BJ102□F SMK316 BJ152□F SMK316 BJ222□F SMK316 BJ332□F SMK316 BJ472□F SMK316 BJ682□F SMK316 BJ103□F B/X5R* B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. 【Temperature Characteristic B7：X7R】 ・1.6mm thickness （L） Rated voltage 100V 250V 630V Part number 1 HMK316 B7473□L HMK316 B7683□L HMK316 B7104□L HMK316 B7154□L HMK316 B7224□L HMK316 B7334□L HMK316 B7474□L HMK316 B7105□L QMK316 B7333□L QMK316 B7473□L QMK316 B7683□L QMK316 B7104□L SMK316 B7153□L SMK316 B7223□L Part number 2 Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 47000 68000 100000 150000 220000 330000 470000 1000000 33000 47000 68000 100000 15000 22000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 1.6±0.2 R R R R R R R R R R R R R R ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 28 11 mlcc06_e-01 ■ REPRESENTATIVE PART NUMBERS ・1.15mm thickness （F） Rated voltage Part number 1 630V Part number 2 SMK316 B7102□F SMK316 B7152□F SMK316 B7222□F SMK316 B7332□F SMK316 B7472□F SMK316 B7682□F SMK316 B7103□F Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R 1000 1500 2200 3300 4700 6800 10000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 1.15±0.1 R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R* B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 150000 220000 330000 470000 680000 1000000 2200000 47000 100000 150000 220000 22000 33000 47000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 R R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave 100000 ±10, ±20 3.5 1.15±0.1 R HALT % Rated voltage 120% 120% 120% 120% 120% 120% 120% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 120% 120% 120% Internal code （P/N 1） Note HALT % Rated voltage 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 150% 150% 150% 150% 120% 120% 120% Internal code （P/N 1） Note HALT % Rated voltage 200% Internal code （P/N 1） Note Capacitance tolerance code is applied to □ of part number. Rated voltage 100V 250V 630V Part number 1 Part number 2 1 HMK325 BJ154□N HMK325 BJ224□N HMK325 BJ334□N HMK325 BJ474□N HMK325 BJ684□N HMK325 BJ105□N HMK325 BJ225□N QMK325 BJ473□N QMK325 BJ104□N QMK325 BJ154□N QMK325 BJ224□N SMK325 BJ223□N SMK325 BJ333□N SMK325 BJ473□N CAPACITORS ●325TYPE 【Temperature Characteristic BJ：B/X5R】 ・1.9mm thickness （N） ・1.15mm thickness （F） Rated voltage Part number 1 100V Part number 2 HMK325 BJ104□F B/X5R* 1 Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. 【Temperature Characteristic B7：X7R】 ・1.9mm thickness （N） Rated voltage 100V 250V 630V Part number 1 Part number 2 HMK325 B7154□N HMK325 B7224□N HMK325 B7334□N HMK325 B7474□N HMK325 B7684□N HMK325 B7105□N HMK325 B7225□N QMK325 B7473□N QMK325 B7104□N QMK325 B7154□N QMK325 B7224□N SMK325 B7223□N SMK325 B7333□N SMK325 B7473□N Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 150000 220000 330000 470000 680000 1000000 2200000 47000 100000 150000 220000 22000 33000 47000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 1.9±0.2 R R R R R R R R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R 100000 ±10, ±20 3.5 1.15±0.1 R ・1.15mm thickness （F） Rated voltage Part number 1 100V HMK325 B7104□F Part number 2 Capacitance tolerance code is applied to □ of part number. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc06_e-01 11 29 ■ REPRESENTATIVE PART NUMBERS ●432TYPE 【Temperature Characteristic BJ：B/X5R】 Rated voltage 100V 250V 630V Part number 1 Temp. char. Part number 2 1 HMK432 BJ474□M HMK432 BJ105□M HMK432 BJ155□M HMK432 BJ225□M QMK432 BJ104□M QMK432 BJ224□M QMK432 BJ334□M QMK432 BJ474□M SMK432 BJ473□M SMK432 BJ683□M SMK432 BJ104□M B/X5R* B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave 470000 1000000 1500000 2200000 100000 220000 330000 470000 47000 68000 100000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 R R R R R R R R R R R HALT % Rated voltage 200% 200% 200% 200% 150% 150% 150% 150% 120% 120% 120% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 150% 150% 150% 150% 120% 120% 120% Internal code （P/N 1） Note Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. 【Temperature Characteristic B7：X7R】 Rated voltage 100V 250V 630V Part number 1 Part number 2 HMK432 B7474□M HMK432 B7105□M HMK432 B7155□M HMK432 B7225□M QMK432 B7104□M QMK432 B7224□M QMK432 B7334□M QMK432 B7474□M SMK432 B7473□M SMK432 B7683□M SMK432 B7104□M Temp. char. Capacitance 〔pF〕 Capacitance tolerance 〔%〕 tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R X7R 470000 1000000 1500000 2200000 100000 220000 330000 470000 47000 68000 100000 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 2.5±0.2 R R R R R R R R R R R Capacitance tolerance code is applied to □ of part number. ■ ELECTRICAL CHARACTERISTICS ●Example of Impedance ESR vs. Frequency characteristics ■ Taiyo Yuden medium-high voltage ceramic capacitor HMK212 BJ104KG / HMK212 B7104KG SMK316 BJ223KL / SMK316 B7223KL SMK432 BJ104KM / SMK432 B7104KM QMK432 BJ474KM / QMK432 B7474KM QMK325 BJ224KN / QMK325 B7224KN HMK325 BJ105KN / HMK325 B7105KN ●Temperature characteristics HMK325 BJ105KN / HMK325 B7105KN ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 30 11 mlcc06_e-01 CAPACITORS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc06_e-01 11 31 ■ RELIABILITY DATA Multilayer Ceramic Capacitors and Super Low Distortion Multilayer Ceramic Capacitors are noted separately. MediumーHigh Voltage Multilayer Ceramic Capacitor 1. Operating Temperature Range Specified Value X7R, X7S：－55～＋125℃ X5R：－55～＋85℃ B：－25～＋85℃ 2. Storage Temperature Range Specified Value X7R, X7S：－55～＋125℃ X5R：－55～＋85℃ B：－25～＋85℃ 3. Rated Voltage Specified Value 100VDC, 250VDC, 630VDC （Between terminals） 4. Withstanding Voltage Specified Value No breakdown or damage 【Test Methods and Remarks】 Applied voltage:Rated voltage×2.5 （HMK） , Rated voltage×2 （QMK） , Rated voltage×1.2 （SMK） Duration：1 to 5sec. Charge/discharge current：50mA max. ５．Insulation Resistance Specified Value 【Test Methods and Remarks】 Applied voltage:Rated voltage （HMK, QMK） , 500V （SMK） Duration：60±5sec. Charge/discharge current：50mA max. 6．Capacitance （Tolerance） Specified Value 【Test Methods and Remarks】 Measuring frequency:1kHz±10% Measuring voltage:1±0.2Vrms Bias application:None 100MΩμF or 10GΩ, whichever is smaller. ±10％、±20％ ７．Dissipation Factor 3.5%max （HMK） 2.5%max （QMK, SMK） Specified Value 【Test Methods and Remarks】 Measuring frequency:1kHz±10% Measuring voltage:1±0.2Vrms Bias application:None 8．Temperature Characteristic of Capacitance B： ±10％（－25～＋85℃） X5R：±15％（－55～＋85℃） X7R：±15％（－55～＋125℃） X7S：±22％（－55～＋125℃） Specified Value 【Test Methods and Remarks】 Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation. Step 1 2 3 （C－C2） ×100 （％） C2 B X5R、X7R、X7S Minimum operating temperature 20℃ 25℃ Maximum operating temperature C ：Capacitance value in Step 1 or Step 3 C2 ：Capacitance value in Step 2 9．Deflection Appearance:No abnormality Capacitance change:Within±10% Specified Value 【Test Methods and Remarks】 Warp:1mm Duration:10sec. Test board:glass epoxy-resin substrate Thickness:1.6mm Capacitance measurement shall be conducted with the board bent. 10．Adhesive Strength of Terminal Electrodes Specified Value 【Test Methods and Remarks】 Applied force:5N Duration:30±5sec. R-230 No terminal separation or its indication. 11．Solderability Specified Value 【Test Methods and Remarks】 Eutectic solder Lead-free solder Solder type H60A or H63A Snー3.0Agー0.5Cu At least 95% of terminal electrode is covered by new solder Solder temperature 230±5℃ 245±3℃ Duration 4±1 sec. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc06_reli-R1 11 mlcc06_reli_e-01 ■ RELIABILITY DATA 12．Resistance to Soldering Appearance: No abnormality Capacitance change: Within±15% （HMK） , ±10% （QMK, SMK） Dissipation factor : Initial value Insulation resistance: Initial value Withstanding voltage （between terminals） : No abnormality Specified Value 【Test Methods and Remarks】 Preconditioning:Thermal treatment （at 150℃ for 1hr） Note1 Solder temperature:270±5℃ Duration:3±0.5sec. Preheating conditions: 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5min. Recovery : 24±2hrs under the standard condition Note3 （Thermal Shock） 13．Temperature Cycle Appearance: Capacitance change: Dissipation factor: Insulation resistance: Specified Value 【Test Methods and Remarks】 Preconditioning:Thermal treatment （at 150℃ for 1hr） Note1 Conditions for 1 cycle／ Step 1: Minimum operating temperature Step 2: Normal temperature Step 3: Maximum operating temperature Step 4: Normal temperature Number of cycles:5 times Recovery : 24±2hrs under the standard condition Note3 ＋0 －3℃ ＋0 －3℃ No abnormality Within±15% （HMK） , ±7.5% （QMK, SMK） Initial value Initial value 30±3min. 2 to 3min. 30±3min. 2 to 3min. 14．Humidity （Steady state） Specified Value Appearance: Capacitance change: Dissipation factor : Insulation resistance: No abnormality Within±15% 7%max （HMK） , 5%max （QMK, SMK） . 25MΩμF or 1000MΩ, whichever is smaller. Appearance: Capacitance change: Dissipation factor: Insulation resistance: No abnormality Within±15% 7%max （HMK） , 5%max （QMK, SMK） . 10MΩμF or 500MΩ, whichever is smaller. Appearance: Capacitance change: Dissipation factor: Insulation resistance: No abnormality Within±15% 7%max （HMK） , 5%max （QMK, SMK） . 50MΩμF or 1000MΩ, whichever is smaller. 【Test Methods and Remarks】 Preconditioning:Thermal treatment （at 150℃ for 1hr） Note1 Temperature:40±2℃ Humidity：90 to 95%RH ＋24 Duration: 500 －0 hrs Recovery : 24±2hrs under the standard condition Note3 15．Humidity Loading Specified Value 【Test Methods and Remarks】 According to JIS 5102 clause 9.9. Preconditioning:Voltage treatment Note2 Temperature:40±2℃ Humidity：90 to 95%RH Applied voltage:Rated voltage Charge/discharge current：50mA max. ＋24 Duration: 500 －0 hrs Recovery : 24±2hrs under the standard condition Note3 16．High Temperature Loading Specified Value 【Test Methods and Remarks】 According to JIS 5102 clause 9.10. Preconditioning:Voltage treatment Note2 Temperature:125±3℃（B7, C7） , 85±2℃ （BJ） Applied voltage:Rated voltage×2 （HMK） Rated voltage×1.5 （QMK） Rated voltage×1.2 （SMK） Charge/discharge current：50mA max. ＋24 Duration: 1000 －0 hrs Recovery : 24±2hrs under the standard condition Note3 Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours. Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and kept at room temperature for 24±2hours. Note3 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition". ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc06_reli_e-01 11 mlcc06_reli-R2 LW REVERSAL DECOUPLING CAPACITORS（LWDCTM） REFLOW ■ FEATURES ■ APPLICATIONS ◦Low equivalent series resistance（ESR）. ◦Decoupling capacitors ◦Low equivalent series inductor（ESL）. ◦Filtering capacitors ◦The effect of noise removal in the high frequency. ◦Decreased ripple voltage. ◦Small size with high capacitance. ■ PART NUMBER J W K ❶ ❷ 2 ❸ ❶Rated voltage〔VDC〕 A 4 J 6.3 L 10 E 16 T 25 ❸End termination K Plated W Type 105 107 212 ❷Series name LW Reverse Type 1 2 △ B ❹ ❺ J 1 ❻ ❹Dimension （inch） L×W 〔mm〕 （0204） 0.52×1.0 （0306） 0.8×1.6 （0508） 1.25×2.0 ❺Dimension tolerance △ Standard △＝Blank space 6 M D － T △ 0 ❼ ❽ ❿ ⓫ ⓬ ⓬Internal code △ Standard △＝Blank space ❿Special code － Standard ❾Thickness 〔mm〕 P 0.3 V 0.5 D 0.85 ❽Capacitance tolerance K ±10% M ±20% ❻Temperature characteristics code B BJ X5R C6 X6S C7 X7S B7 X7R ❾ ⓫Packaging φ178mm Taping F （2mm pitch） 0204 Type φ178mm Taping T （4mm pitch） 0306, 0508 Type ❼Nominal capacitance 〔μF〕 example 105 1.0 106 10.0 ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Type Dimension [mm] W L □WK105 （0204 inch） □WK107 （0306 inch） □WK212 （0508 inch） Standard quantity [pcs] Paper tape Embossed tape T 0.30±0.05 0.50±0.05 P V 10000 － 0.52±0.05 1.00±0.05 0.80±0.10 1.60±0.10 0.50±0.05 V － 4000 1.25±0.15 2.00±0.15 0.85±0.10 D 4000 － ■ AVAILABLE CAPACITANCE RANGE Cap [μF] 0.10 0.22 0.47 1.0 2.2 4.7 10 22 Type VDC [3-digit] 104 224 474 105 225 475 106 226 10 P X7S 6.3 4 P P P 16 105 X6S 10 6.3 4 P 25 16 X5R 10 P P 6.3 P P P V P P,V 4 X7R 25 16 107 X6S 4 V P P V X7S 6.3 4 P P,V 212 25 X5R 16 10 6.3 X6S 6.3 4 X5R 10 6.3 V V V V V V V V V V V V V D D D D D D ※Letters in the table indicate thickness. Temp.char.Code BJ C6 C7 B7 Applicable standard JIS EIA EIA EIA EIA B X5R X6S X7S X7R Temperature characteristics Temperature range 〔℃〕 －25～＋85 －55～＋85 －55～＋105 －55～＋125 －55～＋125 Ref. Temp. 〔℃〕 20 25 25 25 25 Capacitance change 〔％〕 ±10 ±15 ±22 ±22 ±15 Capacitance tolerance 〔％〕 ±10 （K） ±20 （M） ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 32 11 mlcc07_e-01 ■ REPRESENTATIVE PART NUMBERS ●105TYPE （0204 case size） 【Temperature Characteristic BJ:X5R】 ・0.5mm thickness （V） Rated voltage Part number 1 10V 6.3V LWK105 BJ105MV JWK105 BJ105MV Part number 2 Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R*1 1 1 ±20 ±20 10 10 0.5±0.05 0.5±0.05 R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R X5R X5R*1 X5R*1 X5R X5R*1 0.1 0.22 0.47 0.1 0.47 1 0.22 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 10 10 5 10 10 10 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 R R R R R R R HALT % Rated voltage 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% 150% 150% 150% Internal code （P/N 1） Note ・0.3mm thickness （P） Rated voltage 4V Part number 2 TWK105 BJ104MP EWK105 BJ224MP LWK105 BJ474MP JWK105 BJ104MP JWK105 BJ474MP JWK105 BJ105MP AWK105 BJ224MP CAPACITORS 25V 16V 10V 6.3V Part number 1 *1 We may provide X6S/X7S for some itemes according to the individual specification. 【Temperature Characteristic C6:X6S C7:X7S】 ・0.5mm thickness （V） Rated voltage Part number 1 6.3V 4V JWK105 C6105MV AWK105 C6105MV Part number 2 Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X6S X6S 1 1 ±20 ±20 10 10 0.5±0.05 0.5±0.05 R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X6S X7S X6S X7S X7S X6S X6S X6S X6S 0.1 0.1 0.22 0.1 0.22 0.47 0.22 0.47 1 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 10 10 5 10 10 10 10 10 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 0.3±0.05 R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R X5R X5R X5R X5R*1 X5R X5R 0.1 0.22 0.47 1 2.2 1 2.2 4.7 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 5 5 5 10 10 10 10 10 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R R R ・0.3mm thickness （P） Rated voltage 16V 10V 6.3V 4V Part number 1 Part number 2 EWK105 C6104MP LWK105 C7104MP LWK105 C6224MP JWK105 C7104MP JWK105 C7224MP JWK105 C6474MP AWK105 C6224MP AWK105 C6474MP AWK105 C6105MP ●107TYPE （0306 case size） 【Temperature Characteristic BJ:X5R】 Rated voltage 25V 16V 10V 6.3V Part number 1 Part number 2 TWK107 BJ104MV EWK107 BJ224MV EWK107 BJ474MV LWK107 BJ105MV LWK107 BJ225MV JWK107 BJ105MV JWK107 BJ225MV JWK107 BJ475MV *1 We may provide X7R/X7S for some itemes according to the individual specification. 【Temperature Characteristic B7:X7R C7:X7S C6:X6S】 Rated voltage 25V 16V 6.3V 4V Part number 1 TWK107 B7104MV EWK107 B7224MV EWK107 B7474MV JWK107 C7105MV AWK107 C7225MV AWK107 C6475MV Part number 2 Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7S X7S X6S 0.1 0.22 0.47 1 2.2 4.7 ±20 ±20 ±20 ±20 ±20 ±20 5 5 5 10 10 10 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 0.5±0.05 R R R R R R ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc07_e-01 11 33 ■ REPRESENTATIVE PART NUMBERS ●212TYPE （0508 case size） 【Temperature Characteristic BJ:X5R】 Rated voltage 10V 6.3V Part number 2 Part number 1 LWK212 BJ475□D LWK212 BJ106MD JWK212 BJ226MD Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R X5R 4.7 10 22 ±10, ±20 ±20 ±20 10 10 10 0.85±0.1 0.85±0.1 0.85±0.1 R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X6S X6S X6S 4.7 10 22 ±10, ±20 ±20 ±20 10 10 10 0.85±0.1 0.85±0.1 0.85±0.1 R R R HALT % Rated voltage 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% 150% Internal code （P/N 1） Note Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic C6:X6S】 Rated voltage 6.3V 4V Part number 2 Part number 1 JWK212 C6475□D JWK212 C6106MD AWK212 C6226MD Capacitance tolerance code is applied to □ of part number. ■ ELECTRICAL CHARACTERISTICS ●Example of Impedance ESR vs. Frequency characteristics ■ Taiyo Yuden multilayer ceramic capacitor ＪWK105 BJ105MP ＪWK107 BJ475MV M ＪWK212 BJ226MD Z Z, ESR Z Z, ESR Z, ESR Z M M ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 34 11 mlcc07_e-01 CAPACITORS ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc07_e-01 11 35 ARRAY TYPE MULTILAYER CERAMIC CAPACITORS REFLOW ■ FEATURES ■ APPLICATIONS ◦High density and high efficiency mounting. ◦General electronic equipment ◦Internal electrodes are composed of nickel for improved cost performance and reliability. ◦C ommunication equipment (cellular phone, wireless applications, etc.) ■ PART NUMBER E 4 K ❶ ❷ ❸ 2 1 2 △ B ❹ ❺ J 1 4 M D － T △ 0 ❻ ❼ ❸End ❻Temperature ❶Rated ❹Dimension termination characteristics voltage〔VDC〕 Type （inch） L×W ［mm］ code K Plated A 4 096 （0302） 0.9×0.6 B BJ J 6.3 110 （0504） 1.37×1.0 X5R L 10 212 （0805） 2.0×1.25 B7 X7R E 16 CH ❷Series name ❺Dimension tolerance CH T 25 C0H 2 circuits △ Standard 2 U 50 multilayer capacitor △＝Blank space 4 circuits 4 multilayer capacitor ❽ ❾ ❾Thickness 〔mm〕 P 0.3 K 0.45 V 0.5 B 0.6 A 0.8 D 0.85 ❽Capacitance tolerance F ±1pF K ±10% M ±20% ❼Nominal capacitance 〔pF〕 example 104 100,000 105 1,000,000 ❿ ⓫ ⓬Internal code △ Standard △＝Blank space ❿Special code － Standard T F ⓬ ⓫Packaging φ178mm Taping （4mm pitch） 0504, 0805 Type φ178mm Taping （2mm pitch） 0302 Type ■ STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY Dimension [mm] E2 W L Type T L W E1 E2 P □2K096 （0302 inch） 0.9±0.05 0.6±0.05 0.23±0.10 0.125±0.075 0.45±0.05 □2K110 （0504 inch） 1.37±0.07 1.00±0.08 0.36±0.10 0.2±0.10 0.64±0.10 2.00±0.10 1.25±0.10 0.50±0.20 0.25±0.15 2.00±0.10 1.25±0.10 0.25±0.10 0.25±0.15 P K V B A 0.30±0.03 0.45±0.05 0.50±0.05 0.60±0.06 0.80±0.08 1.00±0.10 D 0.50±0.10 D E1 P W L E2 T □2K212 （0805 inch） □4K212 （0805 inch） Standard quantity [pcs] Embossed Paper tape tape T 10000 － 4000 － 0.85±0.10 4000 － 0.85±0.10 4000 － E1 P ■ AVAILABLE CAPACITANCE RANGE BJ/B7 Cap [μF] 0.001 0.0022 0.0047 0.01 0.022 0.047 0.1 0.22 0.47 1.0 2.2 CH Type VDC [3-digit] 102 222 472 103 223 473 104 224 474 105 225 096 2 circuits □2K096 B/X5R X5R 10V 6.3V 4V 110 2 circuits 212 2 circuits 212 4circuits □2K110 □2K212 □4K212 X7R B/X5R X5R B/X5R X5R X7R B/X5R X5R 50V 25V 16V 50V 25V 16V 10V 16V 10V 6.3V 25V 10V 16V 25V 16V 10V 10V B B B P B B B B B K K K K B B B B B B B D D B A K D D D A A,V V A D D D ※Letters in the table indicate thickness. Cap [pF] 10 12 15 18 22 27 33 39 47 56 68 82 100 Type VDC [3-digit] 100 120 150 180 220 270 330 390 470 560 680 820 101 096 2 circuits □2K096 CH 25V 110 2 circuits □2K110 CH 50V P P P P P P P P P P P P P B B B B B B B B B B B B B ※Letters in the table indicate thickness. Temp.char.Code BJ B7 CH Applicable standard JIS B EIA X5R EIA X7R JIS CH EIA C0H Temperature characteristics Temperature range 〔℃〕 Ref. Temp. 〔℃〕 20 －25～＋85 －55～＋85 25 －55～＋125 25 －55～＋125 20 －55～＋125 25 Capacitance change ±10［％］ ±15［％］ ±15［％］ ±60［ppm/℃］ ±60［ppm/℃］ Capacitance tolerance 〔％〕 ±10（K） ±20（M） ±10（K） ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 36 11 mlcc08_e-01 ■ REPRESENTATIVE PART NUMBERS ●096TYPE 2 circuits type 【Temperature Characteristic BJ：B/X5R】 ・0.45mm thickness （K） Rated voltage 6.3V 4V Part number 1 Part number 2 J2K096 BJ473□K J2K096 BJ104□K J2K096 BJ224MK J2K096 BJ474MK A2K096 BJ105MK Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R X5R X5R X5R 0.047 0.1 0.22 0.47 1 ±10, ±20 ±10, ±20 ±20 ±20 ±20 5 5 10 10 10 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 0.45±0.05 R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R 0.01 ±10, ±20 5 0.3±0.03 R Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H 10 12 15 18 22 27 33 39 47 56 68 82 100 ±1pF ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 0.3±0.03 R R R R R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R B/X5R X5R X5R 1 0.47 1 2.2 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 10 5 10 10 0.8±0.08 0.8±0.08 0.8±0.08 0.8±0.08 R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R* B/X5R*1 B/X5R*1 B/X5R*1 B/X5R*1 B/X5R B/X5R*1 B/X5R*1 B/X5R 0.001 0.0022 0.0047 0.01 0.022 0.1 0.047 0.1 0.22 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 5 3.5 5 5 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X5R X5R 1 1 ±20 ±10, ±20 10 10 0.5±0.05 0.5±0.05 R R HALT % Rated voltage 150% 150% 150% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 150% 200% 150% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 150% 150% Internal code （P/N 1） Note ・0.3mm thickness （P） Part number 1 10V L2K096 BJ103□P Part number 2 Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic CH：CH/C0H】 Rated voltage 25V Part number 1 Part number 2 T2K096 CH100FP T2K096 CH120KP T2K096 CH150KP T2K096 CH180KP T2K096 CH220KP T2K096 CH270KP T2K096 CH330KP T2K096 CH390KP T2K096 CH470KP T2K096 CH560KP T2K096 CH680KP T2K096 CH820KP T2K096 CH101KP CAPACITORS Rated voltage Capacitance tolerance code is applied to □ of part number. ●110TYPE 2 circuits type 【Temperature Characteristic BJ：B/X5R】 ・0.8mm thickness （A） Rated voltage 16V 10V 6.3V Part number 1 Part number 2 E2K110 BJ105□A L2K110 BJ474□A L2K110 BJ105□A J2K110 BJ225□A ・0.6mm thickness （B） Rated voltage 50V 25V 16V 10V Part number 1 Part number 2 1 U2K110 BJ102□B U2K110 BJ222□B U2K110 BJ472□B T2K110 BJ103□B T2K110 BJ223□B T2K110 BJ104□B E2K110 BJ473□B E2K110 BJ104□B L2K110 BJ224□B ・0.5mm thickness （V） Rated voltage Part number 1 10V 6.3V L2K110 BJ105MV J2K110 BJ105□V Part number 2 Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc08_e-01 11 37 ■ REPRESENTATIVE PART NUMBERS 【Temperature Characteristic B7：X7R】 Rated voltage 50V 25V 16V Part number 1 Part number 2 U2K110 B7102□B U2K110 B7222□B U2K110 B7472□B T2K110 B7103□B T2K110 B7223□B E2K110 B7473□B E2K110 B7104□B Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R X7R X7R X7R X7R X7R X7R 0.001 0.0022 0.0047 0.01 0.022 0.047 0.1 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 3.5 3.5 3.5 3.5 3.5 3.5 5 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 R R R R R R R Temp. char. Capacitance 〔pF〕 Capacitance tolerance Q Thickness 〔mm〕 Soldering R:Reflow W:Wave CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H CH/C0H 10 12 15 18 22 27 33 39 47 56 68 82 100 ±1pF ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±10% 600 640 700 760 840 940 1000 1000 1000 1000 1000 1000 1000 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 0.6±0.06 R R R R R R R R R R R R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R X5R 1 2.2 ±10, ±20 ±20 5 10 0.85±0.1 0.85±0.1 R R Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave B/X5R B/X5R*1 B/X5R B/X5R X5R 0.1 0.1 0.22 0.47 1 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 ±10, ±20 5 5 5 5 10 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 0.85±0.1 R R R R R HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% 200% Internal code （P/N 1） Note HALT % Rated voltage 200% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% 200% 200% 200% 150% Internal code （P/N 1） Note HALT % Rated voltage 200% Internal code （P/N 1） Note Capacitance tolerance code is applied to □ of part number. 【Temperature Characteristic CH：CH/C0H】 Rated voltage 50V Part number 1 Part number 2 U2K110 CH100FB U2K110 CH120KB U2K110 CH150KB U2K110 CH180KB U2K110 CH220KB U2K110 CH270KB U2K110 CH330KB U2K110 CH390KB U2K110 CH470KB U2K110 CH560KB U2K110 CH680KB U2K110 CH820KB U2K110 CH101KB ●212TYPE 2 circuits type 【Temperature Characteristic BJ：B/X5R】 Rated voltage Part number 1 25V 10V T2K212 BJ105□D L2K212 BJ225MD Part number 2 Capacitance tolerance code is applied to □ of part number. ●212TYPE 4 circuits type 【Temperature Characteristic BJ：B/X5R】 Rated voltage 25V 16V 10V Part number 1 Part number 2 T4K212 BJ104□D E4K212 BJ104□D L4K212 BJ224□D L4K212 BJ474□D L4K212 BJ105□D Capacitance tolerance code is applied to □ of part number. *1 We may provide X7R for some itemes according to the individual specification. 【Temperature Characteristic B7：X7R】 Rated voltage Part number 1 16V E4K212 B7104□D Part number 2 Temp. char. Capacitance 〔μF〕 Capacitance tolerance tanδ 〔%〕 Thickness 〔mm〕 Soldering R:Reflow W:Wave X7R 0.1 ±10, ±20 5 0.85±0.1 R Capacitance tolerance code is applied to □ of part number. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 38 11 mlcc08_e-01 ■ ELECTRICAL CHARACTERISTICS ●Example of Impedance ESR vs. Frequency characteristics ■Taiyo Yuden multilayer ceramic capacitor L2K096BJ103MP 100000 10000 1000 1000 100 100 10 10 1 1 0.1 0.1 0.01 0.1 1 10 100 1000 10000 100000 J2K096BJ104MK 100000 10000 0.01 0.1 T2K096CH100FP 1000000 1 10 100 1000 10000 100000 10000 1000 1000 100 100 10 10 1 1 0.1 0.1 10 100 1000 10000 ESR Impedance 100000 10000 0.01 1 T2K096CH101KP 1000000 ESR Impedance 100000 0.01 1 10 100 T2K110BJ103MB/T2K110B7103MB 100000 100000 E2K110BJ104MB/E2K110B7104MB 10000 10000 L2K110BJ105MA 1000 10 1 10 10 1 1 1 100 10 100 100 0.1 0.1 0.1 0.1 0.01 0.01 0.001 0.1 0.001 0.1 1 10 100 1000 10000 100000 J2K110BJ225MA 10000 1000 100 1000 1000 10000 1 10 100 1000 10000 100000 CAPACITORS 1000000 1000 〔MHz〕 〔MHz〕 0.01 0.01 0.001 0.1 0.001 0.1 1 10 100 1000 10000 100000 1 10 100 1000 10000 100000 L4K212BJ105KD 10000 1000 100 10 1 0.1 0.01 0.001 0.1 1 10 100 1000 10000 100000 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc08_e-01 11 39 ■ PACKAGING ①Minimum Quantity ◦Taped package Thickness Type □MK042 □MK063 □2K096 □WK105 □MK105 □VK105 □MK107 □WK107 □2K110 □MK212 □WK212 □4K212 □2K212 □MK316 □MK325 □MK432 mm code 0.2 0.3 0.3 0.45 0.3 0.5 0.2 0.3 0.5 0.5 0.45 0.5 0.8 0.5 0.6 0.8 0.45 0.85 1.25 0.85 0.85 0.85 1.15 1.25 1.6 0.85 1.15 1.9 2.0max 2.5 2.5 C P,T P K P V C P V, W W K V A V B A K D G D D D F G L D F N Y M M Standard quantity [pcs] Embossed tape — 40000 15000 ③Representative taping dimensions ◦Paper Tape（8mm wide） ◦Pressed carrier tape（2mm pitch） 㧗0.1/−0 Paper tape 10000 20000 15000 — T1 Unit：mm 10000 Type 4000 — 4000 4000 — — 3000 4000 — □MK063 □WK105 Chip Cavity Ａ Ｂ 0.37 0.67 0.65 1.15 Insertion Pitch Ｆ 2.0±0.05 Tape Thickness Ｔ T1 0.45max. 0.42max. 0.45max. 0.42max. ◦Punched carrier tape（2mm pitch） 㧗0.1/−0 — 3000 Unit：mm 2000 — — Type 500（T）, 1000（P） 500 Chip Cavity A B □2K096 0.72 1.02 □MK105 □VK105 0.65 1.15 Insertion Pitch F 52.0±0.05 Tape Thickness T 0.45max. 0.6max. 0.8max. ②Taping material ※No bottom tape for pressed carrier tape ◦Paper tape ◦Punched carrier tape（4mm pitch） 㧗0.1/−0 Unit：mm Type ◦Embossed tape □MK107 □WK107 □2K110 □MK212 □WK212 □4K212 □2K212 □MK316 Chip Cavity A B Insertion Pitch F Tape Thickness T 1.0 1.8 1.1max. 1.15 1.55 1.0max. 1.65 2.4 2.0 3.6 4.0±0.1 1.1max. ◦Chip filled ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_pack-P1 11 mlcc_pack_e-01 ■ PACKAGING ◦Embossed tape（4mm wide） ④Trailer and Leader 0.8±0.04 4.0±0.05 1.8±0.02 0.9±0.05 100mm or more Trailer 160mm min. Leader 400mm min. Ｆ 1.0±0.02 2.0±0.04 Unit：mm Type □MK042 Chip Cavity A B 0.23 0.43 Insertion Pitch F 1.0±0.02 Tape Thickness K T 0.5max. 0.25max. ⑤Reel size t E C ◦Embossed tape（8mm wide） 㧗0.1/−0 A B D R W Unit：mm A φ178±2.0 B φ50min. C φ13.0±0.2 D φ21.0±0.8 E 2.0±0.5 R 1.0 4mm wide tape 8mm wide tape 12mm wide tape t 1.5max. 2.5max. 2.5max. W 5±1.0 10±1.5 14±1.5 Unit：mm Type □WK107 □MK212 □MK316 □MK325 Chip Cavity A B 1.0 1.8 1.65 2.4 2.0 3.6 2.8 3.6 Insertion Pitch F 4.0±0.1 Tape Thickness K T 1.3max 0.25±0.1 3.4max. 0.6max. ◦Embossed tape（12mm wide） ⑥Top Tape Strength 㧗0.1/−0 The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below. 2.0±0.1 F Type □MK432 Chip Cavity A B 3.7 4.9 Unit：mm Insertion Pitch F 8.0±0.1 Tape Thickness K T 4.0max. 0.6max. ⑦Bulk Cassette The exchange of individual specification is necessary. Please contact Taiyo Yuden sales channels. 12±0.1 36＋0/−0.2 110±0.7 8.8±0.1 2.0＋0/−0.1 1.5＋0.1/−0 6.8±0.1 12.0±0.1 ＋0/−0.2 ＋0.2/−0 1.0＋0/−0.1 Unit：mm ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_pack_e-01 11 mlcc_pack-P2 ■ RELIABILITY DATA Super Low Distortion Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic Capacitors are noted separately. Multilayer Ceramic Capacitors 1.Operating Temperature Range Temperature Compensating （Class 1） Specified Value Standard High Frequency Type －55 to ＋125℃ BJ B7 C6 C7 High Permittivity（Class 2） F Specification B X5R X7R X6S X7S F Y5V Temperature Range －25 to ＋85℃ －55 to ＋85℃ －55 to ＋125℃ －55 to ＋105℃ －55 to ＋125℃ －25 to ＋85℃ －30 to ＋85℃ 2. Storage Conditions Temperature Compensating （Class 1） Specified Value Standard High Frequency Type －55 to ＋125℃ BJ B7 C6 C7 High Permittivity（Class 2） F Specification B X5R X7R X6S X7S F Y5V Temperature Range －25 to ＋85℃ －55 to ＋85℃ －55 to ＋125℃ －55 to ＋105℃ －55 to ＋125℃ －25 to ＋85℃ －30 to ＋85℃ 3. Rated Voltage Temperature Compensating Specified（Class 1） Value High Permittivity（Class 2） Standard High Frequency Type 4. Withstanding Voltage （Between terminals） Standard Temperature Compensating Specified（Class 1） High Frequency Type Value High Permittivity （Class 2） 【Test Methods and Remarks】 Applied voltage Duration Charge/discharge current 50VDC, 25VDC, 16VDC 50VDC, 16VDC 50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC No breakdown or damage Class 1 Class 2 Rated voltage×3 Rated voltage×2.5 1 to 5 sec. 50mA max. 5. Insulation Resistance Standard Temperature Compensating High Frequency Type Specified（Class 1） Value High Permittivity（Class 2）Note 1 10000 MΩ min. C≦0.047μF : 10000 MΩ min. C＞0.047μF : 500MΩ・μF 【Test Methods and Remarks】 Applied voltage: Rated voltage Duration: 60±5 sec. Charge/discharge current: 50mA max. 6. Capacitance（Tolerance） Standard Temperature Compensating Specified（Class 1） Value High Frequency Type High Permittivity（Class 2） 【Test Methods and Remarks】 Standard Preconditioning Measuring frequency Measuring voltage Note 1 Bias application C△ U△ 0.5pF≦C≦5pF：±0.25pF 0.5pF<C≦10pF：±0.5pF C＞10pF：±5% CH RH 0.5pF≦C≦2pF：±0.1pF C＞2pF：±5% RH S△ T△ 0.5pF≦C≦2pF：±0.1pF C＞2pF：±5% BJ, B7, C6,C7：±10％ or ±20％, F：－20％／＋80％ Class 1 Class 2 High Frequency Type C≦10μF C＞10μF None Thermal treatment（at 150℃ for 1hr） Note 2 1ＭHz±10％ 1ｋHz±10％ 120±10Hz 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms None 7. Q or Dissipation Factor Standard Temperature Compensating Specified（Class 1） High Frequency Type Value High Permittivity （Class 2）Note 1 【Test Methods and Remarks】 C＜30 pF：Q≧400＋20C、C≧30 pF：Q≧1000 （C：Nominal capacitance） Refer to detailed specification BJ, B7, C6,C7：2.5％ max., F：7％ max. Class 1 Class 2 High Frequency Type C≦10μF C＞10μF None Thermal treatment（at 150℃ for 1hr） Note 2 1ＭHz±10％ 1GHz 1ｋHz±10％ 120±10Hz 0.5 to 5Vrms 1±0.2Vrms 0.5±0.1Vrms None Standard Preconditioning Measuring frequency Measuring voltage Note 1 Bias application High Frequency Type Measuring equipment: HP4291A Measuring jig: HP16192A ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_reli-R1 11 mlcc_reli_e-01 ■ RELIABILITY DATA 8. Temperature Characteristic （Without voltage application） Standard Temperature Compensating （Class 1） High Frequency Type Temperature Characteristic［ppm/℃］ C□ ：0 CH, CJ, CK R□ ：ー220 RH S□ ：ー330 SH, SJ, SK T□ ：ー470 TJ, TK U□ ：ー750 UJ, UK SL ：＋350 to －1000 Specified Value BJ B7 C6 C7 High Permittivity（Class 2） F Specification B X5R X7R X6S X7S F Y5V Tolerance H±60 J±120 K±250 Capacitance change ±10％ ±15％ ±15％ ±22％ ±22％ ＋30/ー80％ ＋22/ー82％ Reference temperature 20℃ 25℃ 25℃ 25℃ 25℃ 20℃ 25℃ Temperature Range －25 to ＋85℃ －55 to ＋85℃ －55 to ＋125℃ －55 to ＋105℃ －55 to ＋125℃ －25 to ＋85℃ －30 to ＋85℃ 【Test Methods and Remarks】 Class 1 Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation. （C85－C20） 6 × 10（ppm/℃） C20×△T △T＝65 Class 2 Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following equation. （C－C2） ×100 （％） B、F X5R、X7R、X6S、X7S、Y5V C2 Minimum operating temperature C ：Capacitance in Step 1 or Step 3 20℃ 25℃ C2 ：Capacitance in Step 2 Maximum operating temperature Step 1 2 3 9. Deflection Standard Temperature Compensating Specified（Class 1） Value High Frequency Type High Permittivity（Class 2） Appearance : Capacitance change : Appearance : Capacitance change : Appearance : Capacitance change : No abnormality Within ±5% or ±0.5 pF, whichever is larger. No abnormality Within±0.5 pF No abnormality Within ±12.5% （BJ, B7, C6, C7） , Within ±30% （F） 【Test Methods and Remarks】 Multilayer Ceramic Capacitors Board 042、063 Type The other types glass epoxy-resin substrate Thickness 0.8mm 1.6mm Warp Duration 1mm 10 sec. Thickness 1.6mm Warp 1mm Duration 10 sec. Board Warp Array Type 096、110、212 Type Board glass epoxy-resin substrate Capacitance measurement shall be conducted with the board bent 10. Body Strength Standard High Frequency Type Temperature Compensating Specified（Class 1） Value High Permittivity（Class 2） 【Test Methods and Remarks】 High Frequency Type Applied force: 5N Duration: 10 sec. — No mechanical damage. — A A A 11. Adhesive Strength of Terminal Electrodes Standard Temperature Compensating Specified（Class 1） High Frequency Type Value High Permittivity（Class 2） 【Test Methods and Remarks】 Multilayer Ceramic Capacitors 042、063 Type 105 Type or more Applied force 2N 5N No terminal separation or its indication. Array Type Duration 30±5 sec. 096 Type 110、212 Type Applied force 2N 5N Duration 30±5 sec. 12. Solderability Standard Temperature Compensating Specified（Class 1） At least 95% of terminal electrode is covered by new solder. High Frequency Type Value High Permittivity（Class 2） 【Test Methods and Remarks】 Solder type Solder temperature Duration Eutectic solder H60A or H63A 230±5℃ 4±1 sec. Lead-free solder Sn-3.0Ag－0.5Cu 245±3℃ ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_reli_e-01 11 mlcc_reli-R2 ■ RELIABILITY DATA 13. Resistance to Soldering Standard Temperature Compensating （Class 1） High Frequency Type Specified Value High Permittivity（Class 2） Note 1 Appearance: No abnormality Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger. Q: Initial value Insulation resistance: Initial value : No abnormality Withstanding voltage（between terminals） Appearance: No abnormality Capacitance change: Within ±2.5% Q: Initial value Insulation resistance: Initial value Withstanding voltage（between terminals） : No abnormality Appearance: No abnormality Capacitance change: Within ±7.5%（BJ, B7, C6, C7） Within ±20%（F） Dissipation factor: Initial value Insulation resistance: Initial value Withstanding voltage（between terminals） : No abnormality 【Test Methods and Remarks】 Class 1 Class 2 105 Type Array （096, 110 Type） None 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min. 150 to 200℃, 2 to 5 min. 270±5℃ 3±0.5 sec. 6 to 24 hrs（Standard condition） Note 5 042, 063 Type Preconditioning Preheating Solder temp. Duration Recovery 105, 107, 212 Type 316, 325 Type Array （096, 110,212 Type） Thermal treatment（at 150℃ for 1 hr）Note 2 150℃, 1 to 2 min. 80 to 100℃, 2 to 5 min. 80 to 100℃, 5 to 10 min. 150 to 200℃, 2 to 5 min. 150 to 200℃, 5 to 10 min. 270±5℃ 3±0.5 sec. 24±2 hrs（Standard condition） Note 5 042、063 Type Preconditioning Preheating Solder temp. Duration Recovery 14. Temperature Cycle (Thermal Shock） Standard Temperature Compensating （Class 1） High Frequency Type Specified Value High Permittivity（Class 2） Note 1 Appearance: No abnormality Capacitance change: Within ±2.5% or ±0.25pF, whichever is larger. Q: Initial value Insulation resistance: Initial value : No abnormality Withstanding voltage（between terminals） Appearance: No abnormality Capacitance change: Within ±0.25pF Q: Initial value Insulation resistance: Initial value Withstanding voltage（between terminals） : No abnormality Appearance: No abnormality Capacitance change: Within ±7.5%（BJ, B7, C6, C7） Within ±20%（F） Dissipation factor: Initial value Insulation resistance: Initial value Withstanding voltage（between terminals） : No abnormality 【Test Methods and Remarks】 Class 1 None Preconditioning Step 1 2 3 4 1 cycle Number of cycles Recovery Class 2 Thermal treatment（at 150℃ for 1 hr） Note 2 Temperature （℃） Lowest operating temperature ＋0/－3 Normal temperature Highest operating temperature ＋0/－3 Normal temperature Time （min.） 30±3 2 to 3 30±3 2 to 3 5 times 6 to 24 hrs（Standard condition） Note 5 24±2 hrs（Standard condition） Note 5 15. Humidity（Steady State） Standard Temperature Compensating （Class 1） Specified Value High Frequency Type Note 1 High Permittivity（Class 2） Appearance: No abnormality Capacitance change: Within ±5% or ±0.5pF, whichever is larger. Q： C＜10pF： Q≧200＋10C 10≦C＜30pF： Q≧275＋2.5C C≧30pF： Q≧350 （C：Nominal capacitance） Insulation resistance: 1000 MΩ min. No abnormality Appearance: Capacitance change: Within ±0.5pF, Insulation resistance: 1000 MΩ min. Appearance: No abnormality Capacitance change: Within ±12.5% （BJ, B7, C6, C7） Within ±30% （F） Dissipation factor： 5.0% max.（BJ, B7, C6, C7） 11.0% max. （F） Insulation resistance: 50 MΩμF or 1000 MΩ whichever is smaller. 【Test Methods and Remarks】 Class 1 Class 2 Standard Preconditioning Temperature Humidity Duration Recovery High Frequency Type None 40±2℃ 60±2℃ 90 to 95％RH 500＋24/ー0 hrs 6 to 24 hrs（Standard condition） Note 5 Preconditioning Temperature Humidity Duration Recovery All items Thermal treatment（at 150℃ for 1 hr） Note 2 40±2℃ 90 to 95％RH 500＋24/ー0 hrs 24±2 hrs（Standard condition） Note 5 ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_reli-R3 11 mlcc_reli_e-01 ■ RELIABILITY DATA 16. Humidity Loading Standard Temperature Compensating （Class 1） High Frequency Type Specified Value High Permittivity（Class 2） Note 1 Appearance: No abnormality Capacitance change: Within ±7.5% or ±0.75pF, whichever is larger. Q： C＜30pF：Q≧100＋10C/3 C≧30pF：Q≧200 （C：Nominal capacitance） Insulation resistance: 500 MΩ min. Appearance: No abnormality Capacitance change: C≦2pF：Within ±0.4 pF C＞2pF：Within ±0.75 pF （C：Nominal capacitance） Insulation resistance: 500 MΩ min. Appearance: No abnormality Capacitance change: Within ±12.5%（BJ, B7, C6, C7） Within ±30% （F） Dissipation factor： 5.0% max.（BJ, B7, C6, C7） 11.0% max. （F） Insulation resistance: 25 MΩμF or 500 MΩ, whichever is smaller. 【Test Methods and Remarks】 Class 1 Class 2 Standard Preconditioning Temperature Humidity Duration Applied voltage Charge/discharge current Recovery High Frequency Type None 40±2℃ 60±2℃ 90 to 95％RH 500＋24/ー0 hrs Rated voltage 50mA max. 6 to 24 hrs（Standard condition） Note 5 Preconditioning Temperature Humidity Duration Applied voltage Charge/discharge current Recovery All items Voltage treatment （Rated voltage are applied for 1 hour at 40℃） Note 3 40±2℃ 90 to 95％RH 500＋24/ー0 hrs Rated voltage 50mA max. 24±2 hrs（Standard condition） Note 5 17. High Temperature Loading Standard Temperature Compensating （Class 1） Specified Value High Frequency Type High Permittivity（Class 2） Note 1 Appearance: No abnormality Capacitance change: Within ±3% or ±0.3pF, whichever is larger. Q： C＜10pF： Q≧200＋10C 10≦C＜30pF： Q≧275＋2.5C C≧30pF： Q≧350（C：Nominal capacitance） Insulation resistance: 1000 MΩ min. Appearance: No abnormality Capacitance change: Within ±3% or ±0.3pF, whichever is larger. Insulation resistance: 1000 MΩ min. Appearance: No abnormality Capacitance change: Within ±12.5% （BJ, B7, C6, C7） Within ±30% （F） Dissipation factor： 5.0% max. （BJ, B7, C6, C7） 11.0% max. （F） Insulation resistance: 50 MΩμF or 1000 MΩ, whichever is smaller. 【Test Methods and Remarks】 Class 1 Class 2 Standard Preconditioning Temperature Duration Applied voltage Charge/discharge current Recovery Note 1 Note 2 Note 3 Note 4 High Frequency Type None 125±3℃ 1000＋48/ー0 hrs Rated voltage×2 50mA max. 6 to 24hr（Standard condition） Note 5 Preconditioning Temperature Duration Applied voltage Charge/discharge current Recovery BJ, F C6 B7, C7 Voltage treatment（Twice the rated voltage shall be applied for 1 hour at 85℃, 105℃ or 125℃） Note 3, 4 85±2℃ 105±3℃ 125±3℃ 1000＋48/ー0 hrs Rated voltage×2 Note 4 50mA max. 24±2 hrs（Standard condition） Note 5 The figures indicate typical specifications. Please refer to individual specifications in detail. Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for 24±2hours. Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the test conditions, and kept at room temperature for 24±2hours. Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition. Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the "standard condition". ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_reli_e-01 11 mlcc_reli-R4 ■ PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors 1. Circuit Design ◆Verification of operating environment, electrical rating and performance 1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have severe social ramifications. Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from them used in general purpose applications. ◆Operating Voltage（Verification of Rated voltage） Precautions 1. The operating voltage for capacitors must always be their rated voltage or less. If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less. For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less. 2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC voltage or a pulse voltage having rapid rise time is used in a circuit. 2. PCB Design ◆Pattern configurations（Design of Land-patterns） 1. When capacitors are mounted on PCBs, the amount of solder used（size of fillet）can directly affect the capacitor performance. Therefore, the following items must be carefully considered in the design of land patterns: （1） Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider appropriate land-patterns for proper amount of solder. Precautions （2） When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by solder-resist. （Capacitor layout on PCBs） ◆Pattern configurations After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes（PCB cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.） . For this reason, land pattern configurations and positions of capacitors shall be carefully considered to minimize stresses. ◆Pattern configurations（Design of Land-patterns） The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts. （1） Recommended land dimensions for typical chip capacitors ●Multilayer Ceramic Capacitors : Recommended land dimensions（unit: mm） Wave-soldering Land patterns for PCBs Type Size L W A B C Land 107 212 316 325 1.6 2.0 3.2 3.2 0.8 51.25 1.6 2.5 0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5 0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7 0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5 Chip capacitor C B Reflow-soldering Type Size L W A B C 042 063 105 107 0.4 0.6 1.0 1.6 0.2 0.3 0.5 0.8 0.15 to 0.25 0.20 to 0.30 0.45 to 0.55 0.8 to 1.0 0.15 to 0.20 0.20 to 0.30 0.40 to 0.50 0.6 to 0.8 0.15 to 0.30 0.25 to 0.40 0.45 to 0.55 0.6 to 0.8 Solder-resist 212 2.0 51.25 0.8 to 1.2 0.8 to 1.2 0.9 to 1.6 316 3.2 1.6 1.8 to 2.5 1.0 to 1.5 1.2 to 2.0 325 3.2 2.5 1.8 to 2.5 1.0 to 1.5 1.8 to 3.2 432 4.5 3.2 2.5 to 3.5 1.5 to 1.8 2.3 to 3.5 B A Chip capacitor W L ●LWDC: Recommended land dimensions for reflow-soldering（unit: mm） LWDC Type Size 105 0.52 1.0 0.18 to 0.22 0.2 to 0.25 0.9 to 1.1 L W A B C Technical considerations 107 50.8 1.6 0.25 to 0.3 0.3 to 0.4 1.5 to 1.7 212 1.25 2.0 0.5 to 0.7 0.4 to 0.5 1.9 to 2.1 W L ●Array type: Recommended land dimensions for reflow-soldering（unit: mm） Type Size a b c d L W 2 circuits 096（2 circuits） 110（2 circuits） 212（2 circuits） 212 （4 circuits） 0.9 1.37 2.0 2.0 0.6 1.0 1.25 1.25 0.25 to 0.35 0.35 to 0.45 0.5 to 0.6 0.5 to 0.6 0.15 to 0.25 0.55 to 0.65 0.5 to 0.6 0.5 to 0.6 0.15 to 0.25 0.3 to 0.4 0.5 to 0.6 0.2 to 0.3 0.45 0.64 1.0 0.5 4 circuits Chip capacitor c c a b a Land d a b a d （2） Examples of good and bad solder application Items Not recommended Recommended Mixed mounting of SMD and leaded components Component placement close to the chassis Hand-soldering of leaded components near mounted components Horizontal component placement To next page ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_prec-P1 11 mlcc_prec_e-01 ■ PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors 2. PCB Design ◆Pattern configurations （Capacitor layout on PCBs） 1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any possible mechanical stresses from board warp or deflection. Items Not recommended Recommended Deflection of board Technical considerations 1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below. 1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB, split methods as well as chip location. 3. Mounting ◆Adjustment of mounting machine 1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them. 2.Maintenance and inspection of mounting machines shall be conducted periodically. Precautions ◆Selection of Adhesives 1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and hardening period. Therefore, please contact us for further information. ◆Adjustment of mounting machine 1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid this, the following points shall be considerable. （1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection. （2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads. （3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle placement: Items Not recommended Recommended Single-sided mounting Double-sided mounting Technical considerations 2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical impact on the capacitors. To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of the pin shall be conducted periodically. ◆Selection of Adhesives Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect components. Therefore, the following precautions shall be noted in the application of adhesives. （1） Required adhesive characteristics a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process. b. The adhesive shall have sufficient strength at high temperatures. c. The adhesive shall have good coating and thickness consistency. d. The adhesive shall be used during its prescribed shelf life. e. The adhesive shall harden rapidly. f . The adhesive shall have corrosion resistance. g. The adhesive shall have excellent insulation characteristics. h. The adhesive shall have no emission of toxic gasses and no effect on the human body. （2） The recommended amount of adhesives is as follows; ［Recommended condition］ Figure 212/316 case sizes as examples a 0.3mm min b 100 to 120 μm c Adhesives shall not contact land ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_prec_e-01 11 mlcc_prec-P2 ■ PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors 4. Soldering ◆Selection of Flux Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use; （1） Flux used shall be less than or equal to 0.1 wt%（in CI equivalent）of halogenated content. Flux having a strong acidity content shall not be applied. （2） When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level. （3） When water-soluble flux is used, special care shall be taken to properly clean the boards. Precautions ◆Soldering Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions. Sn-Zn solder paste can adversely affect MLCC reliability. Please contact us prior to usage of Sn-Zn solder. ◆Selection of Flux 1-1. When too much halogenated substance（Chlorine, Chlorine, etc.） ）content is used to activate fl flux, ux, or highly acidic fl flux ux is used, it may lead to corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors. 1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system. 1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used. Peak260℃ 260℃Max. Max. Peak 230℃ Within10sec. 10sec. Within Within 10 sec. Preheating 200 60sec. 200 200 Min. 60sec. Min. Slow Slow cooling Slowcooling cooling 300 100 100 100 Peak 260℃ Max. Withinabove 10sec. Heating Preheating 150℃ 230℃ 200 60sec. Min. 40sec. Max. 0 Slow cooling 300 100 Peak 260℃ Max. 230∼250℃ Within 10sec. Heating above Heating above Within 3sec. Preheating Heating above Preheating 150℃ 150℃ Preheating 230℃ 230℃ Preheating 150℃ 120sec. Min. 230℃ 60sec. Min. Min. 60sec. 40sec. Max. Max. 40sec. 200 60sec. Min. 200 00 40sec. Max. Slow 0 0 Slow cooling cooling Caution 300 ①The300 ideal condition is to have solder mass（fillet）controlled to 1/2 to 1/3 of the thickness of a capacitor. 300 100 excessive dwell times 100 230∼250℃ 230∼250℃ ②Because can adversely affect solderability, soldering duration230∼250℃ shall be kept as Within 3sec. Within 3sec. close to recommended timesHeating as possible. Preheating Preheating Within 3sec. above Preheating Preheating 150℃ 120sec. Min. 120sec. Min. 230℃ 120sec. Min. 200 200 60sec. Min. 200 40sec. Max. ［Wave soldering］ 0 0 Slow cooling cooling Slow Slow cooling 【Recommended condition for Pb-free soldering】 【Recommended conditions for eutectic soldering】 200 00 Preheating 120sec. Min. 300 100 200 Slow cooling 300 300 100 200 200 0 230∼250℃ Within 3sec. Peak260℃ 260℃Max. Max. Peak Within10sec. 10sec. Within 120sec. Min. Min. 120sec. Slow Slow cooling Preheating cooling Preheating 150℃ 150℃ 120sec. Min. ［Hand200 soldering］ 00 120sec. Min. 0 300 100 200 0 Slow Preheating cooling 150℃ Peak 260℃ Max. Within 10sec. 120sec. Min. Slow 100 300 230∼280℃ Within 3 sec. ②The soldering iron shall not directly touch capacitors. 0 Preheating 60sec. Min. 0 400 60sec. Min. ⊿T Slow cooling 200 400 400 400 100 300 300 300 0 200 200 200 400 100 100 100 300 00 200 100 0 400 Peak 350℃ Max. Within 3sec. 300 0 【Recommended condition for Pb-free soldering】 200 400 400 Slow cooling 400 Peak 350℃ 350℃Max. Max. Peak 230∼280℃Within Within 3sec. 3sec. 100 Within 3 sec. 300 300 300 Preheating ⊿T ⊿T 60sec. Min. 0 Slow cooling cooling Slow 0 200 200 200 200 200 Slow cooling cooling Slow Preheating Preheating Slow cooling 400 400 150℃ Min.350℃ Max. 150℃ Min. Peak 230∼280℃ 100 100 100 100 Within 3sec. 100 Within 3 sec. 300 Preheating 300 Preheating Preheating ⊿T 60sec. Min. 60sec. Min. 60sec. Min. Min. 60sec. 60sec. Min. 00 00 0 Slow cooling ⊿T 200 200 Slow cooling 316type or less Preheating ⊿T≦150℃ Caution 150℃ Min. ①Use100 a 50W soldering iron with a maximum tip diameter of100 1.0 mm. Slow 【Recommended conditions for eutectic soldering】 Preheating cooling 400 400 150℃ 100 230∼280℃ 230∼280℃ Within 33 sec. sec. Within 300 300 T PC board Peak 260℃ Max. Within 10sec. Caution Preheating cooling 300 400 as for reflow soldering ①Wave soldering must not be applied to capacitors designated 150℃ only. 100 100 Peak 260℃ Max. Within 10sec. Capacitor Solder Temperature（℃） Temperature Temperature（℃） （℃） Temperature（℃） Temperature（℃） 300 100 100 Temperature（℃） Temperature Temperature（℃） （℃） Temperature（℃） Temperature（℃） Temperature（℃） Temperature（℃） Temperature（℃） Temperature（℃） Technical considerations 300 100 0 Preheating Peak 280℃ 280℃Max. Max. Peak 150℃ Peak Min. 350℃ Max. Within 3sec. 3sec. Within Within 3sec. ⊿T Min. 60sec. ⊿T ⊿T Temperature（℃） Temperature（℃） Temperature Temperature（℃） （℃）Temperature（℃） Temperature Temperature（℃） （℃） Temperature（℃） Temperature Temperature（℃） （℃） Temperature（℃） Temperature （℃） Temperature （℃） Temperature （℃） 300 300 300 200 Slow 【Recommended condition for Pb-free cooling soldering】 Slow cooling cooling Slow Slow cooling Preheating Preheating Preheating 150℃ Min. 150℃ Min. Peak 280℃ Max. 150℃ Min. Within 3sec. 60sec. Min. Min. 60sec. 60sec. Min. ⊿T Slow cooling ⊿T 325type or morePreheating ⊿T≦130℃ 150℃ Min. 60sec. Min. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_prec-P3 11 mlcc_prec_e-01 300 ⊿T 200 400 100 Temperature（℃） 【Recommended conditions for eutectic soldering】 Temperature（℃） ［Reflow soldering］ Temperature（℃） ◆Soldering • Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling. • Therefore, the soldering must be conducted with great care so300 as to prevent malfunction of the components due to excessive thermal shock. Peak 260℃ • Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between theMax. capacitors and solder shall be within 100 to 130℃. • Cooling : The temperature difference between the capacitors and cleaning process shall Within not be10sec. greater than 100℃. 300 60sec. M 0 200 ⊿T 100 0 60sec. ■ PRECAUTIONS Precautions on the use of Multilayer Ceramic Capacitors 5. Cleaning Precautions Technical considerations ◆Cleaning conditions 1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use of the cleaning.（e.g. to remove soldering flux or other materials from the production process.） 2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect capacitor's characteristics. 1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate their outer coating, resulting in a degradation of the capacitor's electrical properties（especially insulation resistance） . 2. Inappropriate cleaning conditions（insufficient or excessive cleaning）may adversely affect the performance of the capacitors. In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead to the cracking of capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall be carefully checked; Ultrasonic output : 20 W/ℓ or less Ultrasonic frequency : 40 kHz or less Ultrasonic washing period : 5 min. or less 6. Resin coating and mold 1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the hardening period or while left under normal storage conditions resulting in the deterioration of the capacitor's performance. 2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat may lead to damage or Precautions destruction of capacitors. The use of such resins, molding materials etc. is not recommended. 7. Handling ◆Splitting of PCB 1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board. 2. Board separation shall not be done manually, but by using the appropriate devices. Precautions ◆Mechanical considerations Be careful not to subject capacitors to excessive mechanical shocks. （1） If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used. Please be careful that the mounted components do not come in contact with or bump against other boards or components. （2） 8. Storage conditions ◆Storage 1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control temperature and humidity in the storage area. Humidity should especially be kept as low as possible. ・Recommended conditions Ambient temperature : Below 30℃ Humidity : Below 70% RH Precautions The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as time passes, so capacitors shall be used within 6 months from the time of delivery. ・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air. 2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, ｓo care shall be taken to design circuits . Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at 150℃ for 1hour. Technical If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and quality loss of taping/ consider- packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the above period, please check solderability beations fore using the capacitors. ※RCR-2335B （Safety Application Guide for fixed ceramic capacitors for use in electronic equipment） is published by JEITA. Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on. ＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. mlcc_prec_e-01 11 mlcc_prec-P4