CLV0795E-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Cellular • Sat Comm • Scanner board £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 797 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -111 Harmonic Suppression (2nd) -28 Tuning Voltage 1 Max Units 803 MHz dBc/Hz -26 dBc 4 Vdc MHz/V 18 Tuning Sensitivity (avg.) -5 dBm 100 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -8 Load Impedance -6.5 50 Input Capacitance Operating Temperature Range -30 Package Style Power Supply Requirements MINI-14S Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 23 Vdc 26 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV0795E-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 840 820 800 85 °C 25 °C 780 760 -30 °C 740 720 700 0 0.5 1 1.5 2 2.5 3 3.5 4 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 0 -1 -2 -3 -4 -5 0.030 MIN. CUTBACK FROM LIVE PADS -6 -7 -8 -9 -10 727 743 755 765 776 786 795 804 813 FREQUENCY (MHz) 85 °C 25 °C -30 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B