SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE C C APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 PUSHBUTTON SWITCHES TP TINY 500mA 48V 0.4VA 20V SP,DP 9000 SUB-MINI. 100mA 30VDC SP 9000 MINIATURE .6-1A 125VAC 1A 30VDC SP X X X ESD PROTECTION SP WASHABLE 0.4VA 20V VDE TINY CSA TP UL POLES P. C. MOUNT RATINGS (Max. in bold) PANEL MOUNT SIZE SMT MOUNT SERIES ILLUMINATED SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PUSHBUTTON SWITCH SELECTION GUIDE: This catalog contains an extensive variety of pushbutton switches with numerous options and accessories. To facilitate easy selection of the desired switch for your application, this guide lists the various Series with some key selection parameters. PAGE(S) X X C2-C5 X C C6-C9 X C10-C14 X C15-C18 .3-.5A 250VAC 10400 MINIATURE 3 A 110VAC or 24VDC SP,DP X C19-C20 2A 220VAC 300 & 400 MINIATURE 3A 125VAC or 28VDC SP X X X X C21-C27 1.5A 250VAC 0.4VA 20V MPB MINIATURE 300mA 125VAC SP X IP MINIATURE 500mA 48VAC SP X C28 X C29-C31 200mA 50VDC or 250VAC SP MINIATURE 1A 120VAC or 30VDC SP X X X 18000 MINIATURE 1A 120VAC or 30VDC SP,DP X X 8000 MINIATURE 6A 125VAC 3A 250VAC SP,DP X X X C32-C35 C36-C42 C43-C46 4A 30VDC 0.4VA 20V 800 MINIATURE PB MINIATURE 6A 125VAC 3A 250VAC SP,DP X X X X X C47-C56 SP X X X X X C57-C65 SP,DP X X C66-C69 DP X X C70-C72 SP X X X SP X X X SP,DP X X X 7A 30VDC 0.4VA 20V 6A 125VAC 3A 250VAC 7A 30VDC 0.4VA 20V 13000 MINIATURE 4A 125VAC 2A 250VAC 4A 30VDC 100mA 30V 13000X778 MINIATURE 4A 125VAC 2A 250VAC 4A 28VDC 300mA 30VDC 1200 STANDARD 8A 125VAC 4A 250VAC X C73-C75 4A 24VDC 1200M&MR STANDARD 8A 125VAC 4A 250VAC C76-C77 4A 24VDC 4700&4800 STANDARD 6A 125VAC 3A 250VAC MD STANDARD 200mA 30VDC SP,DP,4P X MD1 STANDARD 7.5A 125/250VAC TV5&8 DP X C83 SP X C84 X X C78-C79 C80-C82 10A 125/250VAC TV5&8 8A/128A 250VAC µT85 MD2 STANDARD 15A 125VAC 10A 250VAC TV-5 AV STANDARD SEE TABULATION BOX ON PAGE C86 FOR AV SERIES PUSHBUTTON SWITCHES. C85-C99 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C1 ! New TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES C SMT TP Series switches incorporate many desireable features that include: C2 ● Tape & reel packaging This type of packaging is recommended for: ● economy ● suitability for automated placement ● handling of large quantities of components per packaging unit ● positive component positioning ● protection of terminals against damage during handling ● high static resistance ● Reflow solderable ● High temperature plastic materials ● Tin plated grounding brackets ● Tin-lead alloy over nickel terminal plating ● Terminals turned outward to prevent the shadow effect in infrared soldering and to permit visual inspection of the solder joints ● .021" (0.55mm) air gap between p.c. board and switch case ● End stackable with .400" (10.16mm) pitch ● Available with positioning pins to assure correct switch orientation during the reflow process and provide additional mechanical integrity ● Protected against electrostatic discharges (ESD) up to 10 KV. ● Washable Switches are designed to withstand cleaning processes, including hot water under pressure. Surface mount devices (SMD) are subject to more stringent constraints of temperature, solderability, sealing and space savings than through-hole components. To meet these requirements, APEM has designed a family of tiny surface mount switches that include TP Series pushbutton switches, TG Series slide switches and TL Series toggle switches. See Slide & Toggle switch sections of catalog for TG & TL Series respectively. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE DESIGNED EXCLUSIVELY FOR SURFACE MOUNTING ! New TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES ELECTRICAL SPECIFICATIONS Minimum load: 10 mA at 50 mV or 10µA at 5 VD Initial contact resistance: 50 milliohms maximum Insulation resistance: 1000 MΩ min. at 500 VDC Dielectric strength: 1000 V rms between terminals & frame. 500 V rms between terminals Electrical life (at full load): 60,000 cycles Static resistance: 10 KV (Schaffner equipment) C PACKAGING GENERAL SPECIFICATIONS Moisture resistance: 21 days per IEC 512-6 test 11c Vibration resistance: 10-500 Hz/10g per IEC 512-4 test 6d Shock resistance: 50 g per IEC 512-4 test 6c MATERIALS Case: High temperature plastic UL94V-0 Actuator: High temperature plastic UL94V-0 Grounding brackets: Tin plated steel (includes positioning pins) Contacts: Gold plated brass Terminals: Brass with tin-lead alloy over nickel plate 40.40±0.10 (1.590±.003) A 100.00 DIA mini (3.937 DIA MIN) -40°C to +85°C 7.70 (.303) Operating temperature range: 44.00±0.30 (1.732±.011) 12.00 (.472) ON-MOM .039" (1mm), OFF-MOM. .031" (0.8mm) Unrolling Direction Travel: 360.00 DIA Maxi (14.173 DIA MAX) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Contact ratings (resistive lds.): 0.4 VA at 20 V max. (AC or DC) SOLDERING AND CLEANING Reflow soldering: Infrared, vapor phase and infrared convection Washable: Per IEA-RS448-2: water and detergent - preferred. Solvents. 13.00 DIA±0.25 (.511 DIA±.009) 3.00 (.118) Standard packaging unit: 700 pieces Tape meeting international standard IEC Publication 286-3 (EIA481A) Start leader: 15.7" (400mm) min. Dimension 'A': 1.748" (44.40mm) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C3 ! New TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES Single pole momentary pushbutton switches 2.50 DIA (.098 DIA) 4.50 (.177) 3.80 (.149) 6.90 (.271) Function 2 shown 2.54 (.100) 0.50 (.019) 3.05 (.120) 3.80 (.149) 3 2 1 2.54 (.100) 9.45 (.372) Handle position: 1.00 (.039) 5.55 (.218) 3 2 1 Function 2 C4 5.08 (.200) 1 5.55 (.218) P.C. BOARD DIMENSIONS 3.05 (.120) SWITCH ACTION 1.50 (.059) 0.80 (.031) 3.05 (.120) 8.10 (.318) 3.81 (.150) 7.96 (.313) 5.15 (.202) 4.20 (.165) 1.80 (.070) 6.90 (.271) 10.16 (.400) 5.00 DIA (.196 DIA) 0.50 (.019) 0.80 DIA (.031 DIA) 4.60 DIA (.181 DIA) 2.10 (.082) 4.50 (.177) CIRCUIT ON MOM OFF MOM Function 2 shown 2.54 (.100) 3.81 (.150) 2.50 DIA (.098 DIA) MODEL NO. TP32WS83565 TP33WS83565 0.80 (.031) 5.55 (.218) 8.10 (.318) Single pole momentary pushbutton switches with positioning pins 2.10 (.082) 3 2 1 7.96 (.313) Handle position: 0.65 (.025) C 1.50 (.059) 3 Function 3 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 4.20 (.165) 5.15 (.202) 5.00 DIA (.196 DIA) 1.80 (.070) CIRCUIT ON MOM OFF MOM 10.16 (.400) MODEL NO. TP32WS83500 TP33WS83500 4.60 DIA (.181 DIA) ! New TP SERIES - SMT WASHABLE TINY PUSHBUTTON SWITCHES REFLOW SOLDERING - STANDARD PROFILE SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE The printed circuit board, carried by a conveyor belt,travels through the reflow soldering oven and experiences the following programmed cycles: a. pre-heat to a maximum of 200°C for 30 seconds b. reflow at a maximum of 245°C for 10 seconds c. final cleaning PROCESSING STEPS P.C. board C TEMPERATURE/TIME PROFILE (typical) Solder paste application C 18 s 220 C 200 180 C Component placement 170 C 150 C 70 s 100 Reflow soldering 0 0 1 pre-heating 3 2 drying reflow stabilization peak 4 gradual cooling t (min) Final cleaning P.C. BOARD REWORK RECOMMENDATIONS Hot air reflow technique is preferred. Avoid the use of a soldering iron. Caution: Excessive and/or repeated high temperature exposure may affect switch performance & reliability. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C5 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE TP SERIES - WASHABLE SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES C FEATURES ● Wave solderable. ● Fully sealed for process compatibility. ● Ultra-compact case size. ● Case color options - blue or black (with black actuator). ● SPST, SPDT, DPST & DPDT p.c. mounting models. SPECIFICATIONS Contact ratings (resistive loads): Gold plated brass: 0.4 Volt-Amps max. at 20 V max. Silver plated brass: 0.5 Amps at 48 V max. Minimum load: 10 mA at 50 mV - 10µA at 5 VDC Initial contact resistance: 50 milliohms maximum Insulation resistance: 1000 megohms minimum at 500 VDC Dielectric strength: 1000 V rms min. between terminals and frame. 500 V rms between terminals. Electrical life: 60,000 cycles minimum at full load. Operating temperature range: -30°C to +85°C Plunger travel: 'ON MOM' - .039" (1mm) 'OFF MOM' - .031" (0.8mm) Washing: Permissible with water, detergents and solvents. MATERIALS Contacts & Terminals: Actuator: Bracket: Case: Terminal seal: Gold or silver plated brass Polyamide (UL94V-O),glass filled Tin plated steel PBT (UL94V-O) Epoxy AGENCY LISTINGS GAM T1 (military). Availability: consult factory for details of listed models. Note: drawings show switches with 3 terminals (function 2). Function 3 switches have only 2 terminals. See switch cross-sections at end of section. Straight p.c. terminals - gold plated brass contacts 0.70 (.027) 5.00 (.196) SP APEM 2.54 1 2 3 (.100) 4 5 6 8.10 (.318) 0.50 (.019) 4.20 (.165) 2.54 (.100) 1 4 1.10 DIA (.043 DIA) 5.08 (.200) 9.10 (.358) 5.08 (.200) CIRCUIT ON MOM OFF MOM 1.00 (.039) DOUBLE POLE MODEL NO. TP42P003000 TP43P003000 5.00 DIA (.196 DIA) 6.10 (.240) MOM MOM 8.10 (.318) ON OFF Handle position: C6 4.60 DIA (.181 DIA) CIRCUIT TP32P003000 TP33P003000 3.30 (.129) SINGLE POLE MODEL NO. 1.10 DIA (.043 DIA) 3.80 (.149) 3.55 (.139) 2.50 DIA (.098 DIA) 2.54 (.100) DP APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 TP SERIES - WASHABLE SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Straight p.c. terminals - bracket mounting - gold plated brass contacts 0.70 (.027) 0.40 (.015) 1 2 3 4 5 6 5.00 (.196) 1.10 DIA (.043 DIA) 1 4 0.70 (.027) 0.50 (.019) 9.10 (.358) 10.16 (.400) SP 2.54 (.100) DP Horizontal right angle terminals - gold plated brass contacts 5.08 (.200) 4.20 (.165) 2.54 (.100) 3 2 1 6 5 4 2.54 (.100) 0.50 (.019) 3.30 (.129) Handle position: 9.60 (.377) 3.30 (.129) 2.54 (.100) 3 6 5.08 (.200) 5.08 (.200) CIRCUIT ON MOM OFF MOM 5.00 DIA (.196 DIA) 5.08 (.200) DOUBLE POLE MODEL NO. TP42W003050 TP43W003050 1.10 DIA (.043 DIA) 4.60 DIA (.181 DIA) 9.20 (.362) MOM MOM 0.70 (.027) ON OFF 3.50 (.137) CIRCUIT TP32W003050 TP33W003050 2.50 DIA (.098 DIA) 3.55 (.139) 3.80 (.149) SINGLE POLE MODEL NO. C 10.16 (.400) 5.08 (.200) Handle position: APEM 2.54 (.100) 4.20 (.165) 1.00 (.039) CIRCUIT ON MOM OFF MOM 5.00 DIA (.196 DIA) 5.70 (.224) DOUBLE POLE MODEL NO. TP42Y003050 TP43Y003050 4.60 (.181 DIA) MOM MOM 8.60 (.338) ON OFF 3.30 (.129) TP32Y003050 TP33Y003050 3.55 (.139) 2.50 DIA (.098 DIA) CIRCUIT 2.54 (.100) 5.45 (.214) 8.10 (.318) 1.10 DIA (.043 DIA) DP SP 3 3.30 (.129) 5.08 (.200) Handle position: 5.08 (.200) 0.70 (.027) 8.65 (.340) 9.10 (.358) 5.00 (.196) 5.08 (.200) DP Ø1.10 (.043 DIA) 1.10 DIA (.043 DIA) 4.60 DIA (.181 DIA) CIRCUIT 5.00 (.196) Handle position: 0.70 (.027) SP 8.10 (.318) 2.54 (.100) APEM 2.54 (.100) 1 4 1.10 DIA (.043 DIA) 1 2 3 4 5 6 9.10 (.358) 5.08 (.200) CIRCUIT ON MOM OFF MOM 4.20 (.165) 5.00 DIA (.196 DIA) MOM MOM 1.00 (.039) ON OFF 6.10 (.240) DOUBLE POLE MODEL NO. TP42MW03000 TP43MW03000 3.80 (.149) 3.55 (.139) 2.50 DIA (.098 DIA) TP32MW03000 TP33MW03000 5.08 (.200) SP Wire-wrap terminals - gold plated brass contacts SINGLE POLE MODEL NO. 5.08 (.200) 1 2 3 5.08 (.200) 6 1.10 DIA (.043 DIA) 4.20 (.165) 2.54 (.100) CIRCUIT ON MOM OFF MOM 2.50 DIA (.098 DIA) 5.08 9.20 (.200) (.362) DOUBLE POLE MODEL NO. TP42WW03050 TP43WW03050 5.00 DIA (.196 DIA) MOM MOM 0.50 (.019) ON OFF 3.50 (.137) 4.60 DIA (.181 DIA) CIRCUIT TP32WW03050 TP33WW03050 3.55 (.139) 3.80 (.149) SINGLE POLE MODEL NO. 2.54 (.100) Vertical right angle terminals - gold plated brass contacts 15.20 (.598) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE MODEL NO. 1.10 DIA (.043 DIA) 10.16 (.400) 3.80 (.149) 0.50 (.019) 5.08 (.200) 2.54 (.100) DP APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C7 TP SERIES - WASHABLE SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. ( Allowable options are shown under each respective box). C Model Structure: Series Number of poles Electrical functions Terminals T P 3 4 Single pole Double pole 2 ON MOM 3 OFF MOM P 0 Y 0 W 0 Straight p.c. Straight p.c.with bracket Horizontal right angle W W M W Vertical right angle Wire-wrap Options: Contact & terminal mat'ls. 0 1 3 8 9 Actuators & case colors Brass, gold plated Brass, silver plated Brass, gold plated - (1.27 microns gold) Brass, gold plated contacts with tin plated terminals Contacts brass, gold plated (1.27 microns gold) and tin plated terminals Miscellaneous Specify 30, 35, 80, 82, or 85 See drawings with specifications and dimensions. 0 0 5 0 Example of completely specified model number: TP32Y00305025 Caps 1 0* 2 0* 3 0* 4 0* * - Specify color see caps below. No special requirement Crimped bracket terminals - specify for models with brackets. See additional listings on following page. OPTION DRAWINGS Actuators & case colors 2.50 DIA (.098 DIA) 3.80 (.149) 4.60 DIA (.181 DIA) 3.80 (.149) 4.20 (.165) 5.00 DIA (.196 DIA) 4.20 (.165) 5.00 DIA (.196 DIA) 4.20 (.165) Short (standard) Blue case Black case 30 80 Long 6.10 (.240) 4.60 DIA (.181 DIA) 6.10 (.240) 3.80 (.149) Blue case Black case 35 85 4.60 DIA (.181 DIA) 6.10 (.240) 4.50 (.177) 3.55 (.139) 2.50 DIA (.098 DIA) 5.00 DIA (.196 DIA) Black case 82 Flush CAPS Note: replace last '0' in part numbers with color code. For standard actuator For long actuator only 5.00 DIA (.196 DIA) 3.90 (.153) 3.00 (.118) 4.00 (.157) 1.80 (.070) 1.80 (.070) 4.00 (.157) Colors 5.00 DIA (.196 DIA) 6.50 DIA (.255 DIA) 3.90 (.153) 6.50 DIA (.255) For long actuator only 3.00 (.118) For standard actuator 1 2 3 4 5 6 7/1 9 blue black green grey yellow red white orange 10 20 30 40 U570 If ordered separately U3600 If ordered separately U4310 If ordered separately U4320 If ordered separately Note: Caps U4310 and U4320 (for long actuators) offer better resistance to vibration. C8 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 TP SERIES - WASHABLE SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES SPECIAL OPTIONS & MISCELLANEOUS 00 No special requirement. 07 Trimmed terminals for WW models only - .125" (3.2mm). 08 Extended terminals for W0 models only. 18 WW models without mounting bracket. 20 WW models with mounting bracket and p.c. board spacer tab. 25 Trimmed terminals for all models except WW - .196" (5mm). 30 Wire-wrap terminals on models with Y bracket. 40 With cap U3500 mounted over plunger and bushing. 3.20 (.125) 12.50 (.492) C 07 08 10.16 (.400) 2.70 (.106) Provides additional protection during soldering & cleaning. 50 Crimped bracket terminals (retains switch on p.c. board during assembly and soldering). For models with W0, WW 18 20 40 50 & Y0 terminals. 5.00 (.196) 15.20 (.598) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SPECIAL OPTIONS 25 30 Switch cross-sections 3 2 1 Function 2 (ON MOM) 1 3 Function 3 (OFF MOM) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C9 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES C FEATURES ● Single pole panel and p.c. mounting models. ● Normally open (NO) & normally closed (NC) electrical functions. ● Self-cleaning or butt action contacts. ● Ultra-compact case size. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Travel Total PreOver- 9533 & 9233 .062" (1.60mm) .029"(0.75mm) .027"(0.70mm) 100 mA at 30 VDC 30 milliohms maximum 1000 megohms minimum at 500 VDC 500 V rms min. between terminals. 1000 V rms between terminals & case 9100, 9200N & 9500N: 250,000 cycles min. 9200 & 9500: 100,000 cycles min. -30°C to +65°C 9532 & 9232 .070"(1.80mm) .039"(1.00mm) .029"(0.75mm) 9533N, 9233N & 9133 .035"(0.9mm) - MATERIALS Contacts & Terminals: Actuator: Bracket: Case: Bushing: Terminal seal: Hardware: Gold plated brass Polyamide,glass filled Tin plated steel PPS Nickel plated brass Epoxy Threaded bushing models supplied with 1 Hex Nut p/n U544. See drawing end of section. Solder lug terminals - threaded bushing - self-cleaning contacts Normally closed 9533CD Normally open 3.00 (.118) 9532CD 2.54 (.100) 3.00 (.118) 0.18 (.007) C10 4.00 DIA X 0.70 SI (.157 DIA X 0.70 IS) 6.50 DIA (.255 DIA) 8.00 (.314) 3.50 (.137) 2.45 DIA (.096 DIA) 2.00 (.078) EPOXY APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Straight p.c. terminals - threaded bushing - self-cleaning contacts Normally open 6.50 DIA (.255 DIA) 1.10 DIA (.043 DIA) 0.18 (.007) 5.00 (.196) 2.54 (.100) EPOXY 0.60 (.023) C 2.54 (.100) 9233CD 4.00 DIA X 0.70 SI (.157 DIA X 0.70 IS) 8.00 (.314) Normally closed 3.00 (.118) 9232CD Straight p.c. terminals - bracket mounting - self-cleaning contacts 3.50 (.137) 2.45 DIA (.096 DIA) Normally open 0.40 (.015) 2.54 (.100) 5.08 (.200) 5.08 (.200) EPOXY 0.18 (.007) 4.00 (.157) 0.60 (.023) 1.10 DIA (.043 DIA) 7.62 (.300) 9233YCD 2.54 (.100) Normally closed 3.00 DIA (.118 DIA) 9.30 (.366) 9232YCD 2.60 (.102) 7.62 (.300) Right angle p.c. terminals - self-cleaning contacts 2.70 (.106) EPOXY 0.18 (.007) 0.60 (.023) Normally open 0.60 (.023) 0.60 (.023) 1.10 DIA (.043 DIA) 10.16 (.400) 5.08 (.200) 9233WWCD Normally closed 3.00 (.118) 9232WWCD 9.50 (.374) 3.00 DIA (.118 DIA) 3.25 (.127) 3.50 (.137) 5.08 (.200) 10.16 (.400) 2.54 (.100) 2.54 (.100) 5.08 (.200) 6.5 DIA (.255) 2.45 DIA (.096 DIA) Solder lug terminals - threaded bushing - butt action contacts Normally open 6.10 (.240) 9533NCD 4.00 DIAX 0.70 SI (.157 DIA X 0.70 IS) 3.50 (.137) 2.45 DIA (.096 DIA) 6.50 DIA (.255 DIA) 0.40 (.015) 2.54 (.100) EPOXY 2.00 (.078) 3.00 (.118) 3.00 (.118) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 3.50 (.137) 2.45 DIA (.096 DIA) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C11 9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Straight p.c. terminals - threaded bushing - .350" (8.9mm) p.c. to panel - butt action contacts 4.00 DIA X 0.70 SI (.157 DIA X 0.70 IS) 6.50 DIA (.255 DIA) 8.90 (.350) C 1.10 DIA (.043 DIA) EPOXY 0.40 (.015) 4.00 (.157) 0.60 (.023) 2.54 (.100) Normally open 3.00 (.118) 9233NCD 2.54 (.100) Straight p.c. terminals - threaded bushing - .279" (7.1mm) p.c. to panel - butt action contacts 7.10 (.279) 6.50 DIA (.255 DIA) EPOXY 0.60 (.023) 4.00 (.157) 0.40 (.015) 1.10 DIA (.043 DIA) 2.54 (.100) 3.00 (.118) Normally open 6.10 (.240) 9133CD 4.00 DIA X 0.70 SI (.157 DIA X 0.70 IS) 3.50 (.137) 2.45 DIA (.096 DIA) 2.54 (.100) Straight p.c. terminals - tall bracket mounting - butt action contacts 1.10 DIA (.043 DIA) 0.60 (.023) 0.40 (.015) 2.54 (.100) 0.60 (.023) 2.54 (.100) 0.40 (.015) 4.00 (.157) EPOXY 5.08 (.200) 7.62 (.300) Normally open 9.30 (.366) 2.60 (.102) 9233NYCD 3.00 DIA (.118 DIA) 3.50 (.137) 2.45 DIA (.096 DIA) 5.08 (.200) 7.62 (.300) Straight p.c. terminals - short bracket mounting - butt action contacts 5.08 (.200) 7.62 (.300) 5.08 (.200) 2.54 (.100) 0.60 (.023) 7.62 (.300) C12 0.60 (.023) 0.40 (.015) 2.54 (.100) 1.10 DIA (.043 DIA) 4.00 (.157) EPOXY 0.40 (.015) 3.00 DIA (.118 DIA) 7.70 (.303) Normally open 2.60 (.102) 9133YCD 3.50 (.137) 2.45 DIA (.096 DIA) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 6.10 (.240) 3.50 (.137) 2.45 DIA (.096 DIA) 9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Right angle p.c. terminals - butt action contacts 10.16 (.400) 1.10 DIA (.043 DIA) C 3.25 (.127) 10.16 (.400) 0.60 (.023) 5.08 (.200) 2.54 (.100) 2.54 (.100) 5.08 (.200) 0.60 (.023) 3.00 DIA (.118 DIA) 0.60 (.023) 7.60 (.299) 0.40 (.015) 5.08 (.200) Normally open 6.5 DIA (.255 DIA) EPOXY 3.00 (.118) 2.45 DIA (.096 DIA) 9133WWCD 2.70 (.106) Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. (Allowable options are shown under each respective box). Note: 'NONE' indicates box may be left empty. Model Structure: Series Terminals case height 9 Number of poles Electrical funtion Bracket/ terminals 3 Single pole 2 3 Normally closed (NC) Normally open (NO) Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. Case height: .314" (8mm) 2......Straight p.c. terminals, threaded bushing...........................................(NONE) 2......Straight p.c. terminals, tall bracket, smooth bushing..........................Y 2......Right angle p.c. terminals, bracket, smooth bushing......................... W W 5......Solder lug terminals, threaded bushing............................................. (NONE) Case height .240" (6.1mm) 1......Straight p.c. terminals, threaded bushing .279" (7.1mm) to panel.....(NONE) 1......Straight p.c. terminals, short bracket, smooth bushing......................Y 1......Right angle p.c. terminals, bracket, smooth bushing......................... W W 2......Straight p.c. terminals, threaded bushing, .350" (8.9mm) to panel....N 2......Straight p.c. terminals, tall bracket, smooth bushing......................... N Y 5......Solder lug terminals, threaded bushing............................................. N Options: Contact materials Sealing Actuator Caps available separately see option drawings C D (NONE) Epoxy sealed terminals (standard) K Front panel sealing with two 'o'-rings Gold plated brass (standard) (NONE) Standard 0 Flush 4 Long Example of completely specified model number: 9233YCD ACTUATOR OPTIONS 2.45 DIA (.096 DIA) 2.45 DIA (.096 DIA) 2.5 DIA (.098 DIA) (NONE) Standard 4.70 (.185) 3.50 (.137) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 3.50 (.137) 0 Flush 4 Long APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C13 9000 SERIES - SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES MISCELLANEOUS SWITCH ACTION PANEL CUT-OUT TERMINAL OUTLINES Function 3 (NO) butt action contacts 4.00 (.157) 0.60 (.023) Solder lug Straight p.c. OPTION DRAWINGS CAPS Note: replace last '0' in p/n with color code. (order separately) Below caps have deeper engagement and provide better retention 6.50 DIA (.255 DIA) U3600 For standard actuator U4310 For 4 actuator only 3.00 (.118) 3.00 (.118) 4.00 (.157) 1.80 (.070) U570 Standard For standard actuator 5.00 DIA (.196 DIA) 3.90 (.153) 3.90 (.153) 5.00 DIA (.196 DIA) 1.80 (.070) 4.00 (.157) 6.50 DIA (.255) U4320 For 4 actuator only Colors 1 2 3 4 5 6 7/1 9 blue black green grey yellow red white orange SEALING OPTIONS (NONE) Epoxy sealed terminals standard. K Front panel sealing with 2 '0'-rings (1) provides protection against water and dust. Panel seal withstands 0.1bar pressure 1 K HEX NUT Supplied with threaded bushing models 5.00 (.196) 1.50 (.059) M4 X 0.70 SI (.157 DIA X 0.70 IS) U544 Nickel plated C14 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Function 2 Function 3 (NC) (NO) Self-cleaning contacts 2.00 (.078) 0.80 (.031) C 4.20 DIA (.165 DIA) 5.00 (.196) 1.00 (.039) 3.00 (.118) 1.00 (.039) C FEATURES ● Single pole panel mounting models. ● NO, NC & NC/NO combined electrical functions. ● Solder lug & straight p.c. terminals. ● Compact case size. ● Supplied with 2 Hex Nuts & Lockwasher. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Travel: Gold plated brass: 100 mA at 30 VDC Silver: 0.3 Amps at 250 VAC, 0.6 Amps at 125 VAC or 1 Amp at 30 VDC 50 milliohms maximum 1000 megohms minimum at 500 VDC 1000 V rms min. between terminals. 1500 V rms between terminals & case 250,000 cycles minimum -30°C to +65°C 9600, 9400 & 9400Y models - .051" (1.3mm) 9600N & 9400N models - .035" (0.9mm) MATERIALS Contacts & Terminals: Actuator: Bracket: Case: Bushing: Terminal seal: Hardware: Gold plated brass or silver Polyamide,glass filled or nickel plated brass (with K option) Tin plated steel Diallyl phthalate Nickel plated brass Epoxy Supplied with 2 Hex Nuts .314" (8mm) across flats & 1 Lockwasher See hardware section of catalog. Solder lug terminals - case length .440" (11.2mm) - silver contacts 6.00 (.236) 4.00 DIA (.157 DIA) Normally closed 9635AB NC/NO combined 6.35 DIA-40UNS (1/4-40UNS) 10.00 DIA (.393 DIA) 11.20 (.440) 9632AB 7.00 (.275) 9.00 DIA (.354 DIA) NO EPOXY 2.00 (.078) NC 5.20 (.204) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES NO 0.40 (.015) 5.08 (.200) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C15 9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES Straight p.c. terminals - case length .440" (11.2mm) - gold plated brass contacts Normally closed 9433CDB Normally open 9435CDB NC/NO combined 11.85 (.466) NO NO NC 4.55 (.179) 1.00 (.039) ÿ1.60 (.062 DIA) ÿ9.00 (.354 DIA) 5.08 (.200) C 7.00 (.275) ÿ10.0 (.393 DIA) 0.40 (.015) 5.08 (.200) F2 F5 Bracket mounting w/straight p.c. terminals - case length .440" (11.2mm) - gold plated brass contacts 15.75 (.620) 5.08 (.200) 6.35 DIA-40UNS (1/4-40UNS) 0.40 (.015) 3.18 (.125) NC 0.40 (.015) 5.08 (.200) 15.75 (.620) 1.17 (.046) NC/NO combined 1.60 DIA (.062 DIA) NO NO 5.08 (.200) 9435YCDB Normally open 3.18 (.125) 10.00 DIA (.393 DIA) 13.00 (.511) 9433YCDB Normally closed 4.10 (.161) 9432YCDB 6.60 (.259) 5.08 (.200) 6.00 (.236) 4.00 DIA (.157 DIA) 15.75 (.620) 8.20 (.322) F2 3.18 (.125) F5 Solder lug terminals - case length .334" (8.5mm) - silver contacts 6.00 (.236) 4.00 DIA (.157 DIA) Normally open 8.50 (.334) 9.50 DIA (.374 DIA) 5.08 (.200) EPOXY 2.00 (.078) 1.50 (.059) 0.40 (.015) 5.00 (.196) 7.00 (.275) 9633NAB 6.35 DIA-40UNS (1/4-40UNS) 8.50 DIA (.334 DIA) Straight p.c. terminals - case length .334" (8.5mm) - gold plated brass contacts 6.00 (.236) 4.00 DIA (.157 DIA) Normally open 10.00 (.393) 9.50 DIA (.374 DIA) 1.60 DIA (.062 DIA) 1.00 (.039) 8.50 DIA (.334 DIA) 5.08 (.200) 5.08 (.200) 3.50 (.137) 0.40 (.015) 1.50 (.059) 7.00 (.275) 9433NCDB 6.35 DIA-40UNS (1/4-40UNS) C16 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 9432CDB 5.08 (.200) ÿ6.35-40UNS (1/4-40UNS) 5.08 (.200) 6.00 (.236) ÿ4.00 (.157 DIA) 9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES Solder lug terminals - .630" dia. (16mm) bushing - metal button - silver contacts 7.40 (.291) Gold plated silver contacts 19.00 (.748) Normally open C Panel cut-out: .637" dia. (16.2mm) Maximum rating: 0.3A 250VAC or 1A 30VDC Epoxy sealed terminals. Other options not applicable for this 16.00 DIAx1.00SI (.629 DIAx1.00IS) configuration 2.00 (.078) 0.40 (.015) 5.08 (.200) 5.20 (.204) 9.50 (.374) 9633ADX1146 3.00 (.118) 1.50 (.059) Normally open Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. (Allowable options are shown under each respective box). Note: 'NONE' indicates box may be left empty. Model Structure: Series Terminals/case length Number of poles Electrical function Bracket/case length 3 9 4 6 4 6 Straight pc terms.,case length .440" (11.2mm) Solder lug terms., case length .440" (11.2mm) Straight pc terms. with optional case length/brkt. - select N or Y from 'brkt/case length' box Solder lug terms.with optional case length indicate N in 'brkt/case length' box 2 3 5 Single pole Normally closed (NC) Normally open (NO) NC/NO combined (NONE) N Case length .334" (8.5mm) Y Brkt. mounting, case length .456" (11.6mm) Options: Contact materials Sealing A Silver C D Brass, gold plated Special options (NONE) F Tin plated terminals (for p.c. terms.only) X 6 0 1 Special contact w/lower rating (NONE) No sealing B Epoxy sealed terminals K Front panel sealing with two 'o'-rings & metal actuator Example of completely specified model number: 9432YCDBF Caps available separately see option drawings. Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. MISCELLANEOUS SWITCH ACTION 5.20 (.204) 1.50 (.059) 1.00 (.039) 2.00 (.078) Function 3 (NO) Function 5 (combined) Solder lug 4.55 (.179) 6.50 DIA (.255 DIA) 1.20 (.047) Function 2 (NC) PANEL CUT-OUT TERMINAL OUTLINES 5.20 (.204) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 9633AX1146 18.00 DIA (.708 DIA) 3.30 (.129) 12.00 DIA (.472 DIA) Silver contacts Straight p.c. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C17 9000 SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES OPTION DRAWINGS & SPECIAL OPTIONS CAPS Note: replace last '0' in p/n with color code. (order separately) 10.00 DIA (.393) 9.40 DIA (.370) 8.00 DIA (.314 DIA) 8.00 (.314) 8.00 (.314) 5.80 (.228) 10.50 DIA (.413 DIA) 6.35 DIA-40UNS (1/4-40UNS) U825 (for cap U630) 6.35 DIA-40UNS (1/4-40UNS) U840 (for cap U480) SPECIAL OPTIONS F Tin plated terminals (for p.c. terminals only). X601 Silver plated brass contacts Contact ratings: 0.2A 250VAC, 0.4A 125VAC or 0.5A 30VDC Electric life: 20,000 cycles minimum. Minimum quantity: 5,000 pieces. C18 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE blue black green grey yellow red white orange 13.50 DIA (.531 DIA) 5.80 (.228) 15.50 DIA (.610 DIA) (for cap U1140) 1 2 3 4 5 6 7/1 9 Order separately. 18.50 DIA (.728 DIA) 6.35 DIA-40UNS (1/4-40UNS) 3.00 (.118) U2020 Square 6.20 (.244) 8.20 DIA (.322 DIA) Colors 6.00 (.236) 5.00 (.195) 4.00 (.157) 3.00 (.196) 10.00 (.393) 3.00 (.118) Chrome plated. U480 Standard 11.50x11.50 (.452 SQ) 11.50x11.50 (.452 SQ) 12.70 DIA (.500 DIA) U1636 U1720 U2430 Square DRESS NUTS 6.35 (.250) 3.00 (.118) U1140 15.00 DIA (.590 DIA) U630 6.35 (.250) 3.00 (.118) 4.00 (.157) U900 8.20 (.322) C 3.30 (.129) 7.50 (.295) 5.00 DIA (.196) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 10400 SERIES - PROFESSIONAL MINIATURE MOMENTARY PUSHBUTTON SWITCHES C FEATURES ● Single and double pole panel mounting models with optional matte black finish. ● ON - MOM electrical functions. ● Solder lug terminals. ● Compact case size with 10mm (.393") diameter threaded bushing. ● Epoxy terminal sealing standard. SPECIFICATIONS Contact ratings & life: (resistive loads) Initial contact resistance: Insulation resistance: Dielectric strength: Electric life: Torque: Operating temp. range: Silver or gold plated silver: 3 Amps at 110 VAC, 2 Amps at 220 VAC or 3 Amps at 24 VDC. 10 mΩ max. 1000 megohms min. at 500 VDC 1000 V rms min. between terminals of the same pole 2000 V rms min. between terminals and frame 2000 V rms min. between terminals of adjacent poles 50,000 cycles min. 1.106 Ft-lbs. (1.50 Nm) max. applied to nut -40°C to +85°C MATERIALS Contacts & Terminals: Actuator: Case: Housing: Bushing: Terminal seal: Silver or gold plated silver Chrome plated brass Diallyl phthalate Nickel plated brass Nickel plated brass Epoxy AGENCY LISTINGS CECC 96401-001 Availability: Consult factory for details of approved models. Marking: To order switches marked CECC, add 'CECC' to model number. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C19 10400 SERIES - PROFESSIONAL MINIATURE MOMENTARY PUSHBUTTON SWITCHES 10.00 DIA X 0.75 SI (.393 DIA X 0.75 IS) Standard hardware supplied: 1 Knurled nut, 1 hex nut, 1 locking ring and 1 lockwasher Double pole - solder lug terminals 11.00 (.433) 10.00 DIA X 0.75 SI (.393 DIA X 0.75 IS) 6.00 (.236) 12.70 5.00 (.500) (.196) MOM A 14.00 (.551) B Standard hardware supplied: 1 Knurled nut, 1 hex nut, 1 locking ring and 1 lockwasher 5.00 (.196) 14.00 DIA (.551 DIA) 11.00 (.433) 2 5 3 6 1 4 14.00 (.551) MOM 1 3 2 Gold plated silver contacts 104450108 ON - EPOXY 2.50 (.098) B 2-3 5-6 - 3 6.40 DIA (.251 DIA) A 2-1 5-4 1 2 5.00 (.196) 14.00 DIA (.551 DIA) Silver contacts 104450003 ON B 14.00 (.551) A 4.00 (.157) MOM 8.00 (.314) 4.00 (.157) C 12.70 5.00 (.500) (.196) 2 3 1 Gold plated silver contacts 104350108 ON - MOM 0.50 (.019) - 2.50 (.098) B 1-3 0.50 (.019) Silver contacts 104350003 ON 6.40 DIA (.251 DIA) A 1-2 EPOXY MISCELLANEOUS SWITCH ACTION TERMINAL OUTLINE PANEL CUT-OUT 1.20 (.047) 2 3 1 Single pole C20 6.20 (.244) 5.00 (.196) 1.70 (.066) 10.20 DIA (.401 DIA) 2.50 (.098) 2.20 (.086) 1 3 2 Double pole Solder lug APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Single pole - solder lug terminals SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES C FEATURES ● Dry circuit through power ratings . ● Compact size SPST momentary and alternate action models with numerous options. ● Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPECIFICATIONS Contact ratings & life: Initial contact resistance: Insulation resistance: Dielectric strength: Operating temperature range: (Q) power models - coin silver: 1 Amp at 125 VAC or 28 VDC or 0.5 Amps at 250 VAC - electric life 250,000 cycles min. 3 Amps at 125 VAC or 28 VDC, or 1.5 Amps at 250 VAC - electric life 10,000 cycles min. (All previous loads are resistive). (B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max.electric life 250,000 cycles min. UL models - coin silver: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (75% power factor). UL file no. E66367. 10 milliohms max. at 3 VDC, 0.1 Amp. Greater than 10,000 megohms. 1000 Volts RMS min. at sea level. -30°C to +85°C MATERIALS Contacts: Actuator: Bushing: Base: Terminal seal: Support bracket: Spring mounting bracket: Bezel & cap: Hardware: LED: Coin silver for power & UL models. Gold over nickel over brass for dry circuit models. Nylon. Black color is standard for 300 Series. White is standard for 400 Series. Nickel plated brass Melamine phenolic, color red. Epoxy (standard) Brass or steel, tin plated Stainless steel Nylon. Available in black, red or white. Consult factory for other colors. See Miscellaneous section. Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. continuous forward current: 30 mA at 25°C. Red standard - yellow & green are optional. Specifications are subject to change without notice - consult factory. AGENCY RECOGNITION UL Marking: Switches ordered with '/UL' added at end of model no. are supplied with recognized mark. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models & options b. 'build your own switch' order format c. Additional options & panel cut-outs APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C21 300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES 301 SPST Momentary (Normally open or normally closed) White actuator optional - black is standard C (Q) Power Model No. 301ZQE 302ZQE (B) Dry ckt. Model No. 301ZBE 302ZBE UL Model No. 301ZQE/UL 302ZQE/UL 303ZQE 304ZQE 303ZBE 304ZBE 303ZQE/UL 304ZQE/UL 305ZQE 306ZQE 305ZBE 306ZBE 305ZQE/UL 306ZQE/UL Switch caps optional - see Hardware section of catalog. N.O. with overtravel Total travel: Overtravel: Actuation force: .110 .020 min. 8.5 oz. ± 4 oz. 302 303 304 N.O. without overtravel Total travel: .060 Actuation force: 10 oz. ± 4 oz. N.C. with pretravel Total travel: .055 Pretravel: .020 min. Actuation force: 8 oz. ± 4 oz. N.C. without pretravel Total travel: .040 Actuation force: 8.5 oz. ± 4 oz. 305 306 N.O. with sealed contact area and maximum overtravel. Total travel: .310 Pretravel to contact closure: .025 Actuator force to contact closure: 1.5 oz. Overtravel: .250 minimum Actuation force at full travel: 9 oz. Note: Electrical or mechanical life for this model is 50,000 cycles. N.O. with more overtravel than 301 Total travel: .110 Pretravel to contact closure: .030 Actuation force to contact closure: 3 oz. Overtravel: .075 Actuation force at full travel: 8 oz. 400 SERIES (401 Push on/ push off, 402 N.O. momentary) Black actuator optional white is standard (Q) Power Model No. 401ZQE (B) Dry ckt. Model No. 401ZBE UL Model No. 401ZQE/UL 402ZQE 402ZBE 402ZQE/UL SNAP-ACTION MECHANISM Pretravel to contact clusure: .026 Travel to actuate switch .106 Total travel: .137 Force to actuate switch: 22 oz. Force at maximum travel: 35 oz. Mechanical life: 1,000,000 cycles minimum United States Patent 4,319,106 Switchcaps optional - see Hardware section of catalog. OPTIONS Colored operating actuator Available in dyed nylon.To specify, add digit at end of model number 1 blue, 2 black, 3 green, 5 yellow, 6 red, 7/1 white or 9 orange. Black is standard for 300 Series. White is standard for 400 Series. C22 Z C E (standard) Solder lug terminal Printed circuit terminal Epoxy seal APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 300 SERIES 300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Solder lug terminals - snap-in bezel with outboard LED POWER CKT. MODEL NO. 301SZQEJ6168 302SZQEJ6168 303SZQEJ6168 304SZQEJ6168 305SZQEJ6168 401SZQEJ6168 402SZQEJ6168 DRY CKT. MODEL NO. 301SZBEJ6168 302SZBEJ6168 303SZBEJ6168 304SZBEJ6168 305SZBEJ6168 401SZBEJ6168 402SZBEJ6168 UL MODEL NO. 301SZQEJ6168/UL 302SZQEJ6168/UL 303SZQEJ6168/UL 304SZQEJ6168/UL 305SZQEJ6168/UL 401SZQEJ6168/UL 402SZQEJ6168/UL ELECTRICAL FUNCTION MOM. S.P N.O. w/overtravel MOM. S.P N.O. no overtravel MOM. S.P N.C. w/pretravel MOM. S.P N.C. no ptretravel MOM. S.P N.O. w/overtravel S.P Alternate snap-action MOM. S.P N.O. (snap-action) UL MODEL NO. 301SZQEJ8168/UL 302SZQEJ8168/UL 303SZQEJ8168/UL 304SZQEJ8168/UL 305SZQEJ8168/UL 401SZQEJ8168/UL 402SZQEJ8168/UL ELECTRICAL FUNCTION MOM. S.P N.O. w/overtravel MOM. S.P N.O. no overtravel MOM. S.P N.C. w/pretravel MOM. S.P N.C. no ptretravel MOM. S.P N.O. w/overtravel S.P Alternate snap-action MOM. S.P N.O. (snap-action) C 401SZQEJ6168 RECOMMENDED PANEL CUTOUT Panel thickness range - .047-.125 MODEL NO. 301 302 303 304 305 401 402 DIM. A .108 .085 .085 .085 .108 .145 .145 DIM. B .929 .817 .929 .817 .929 1.142 1.142 LED leads - 31/32" min. long Anode (front) - white Cathode (back) - black Solder lug terminals - snap-in bezel POWER CKT. MODEL NO. 301SZQEJ8168 302SZQEJ8168 303SZQEJ8168 304SZQEJ8168 305SZQEJ8168 401SZQEJ8168 402SZQEJ8168 302SZQEJ8168 DRY CKT. MODEL NO. 301SZBEJ8168 302SZBEJ8168 303SZBEJ8168 304SZBEJ8168 305SZBEJ8168 401SZBEJ8168 402SZBEJ8168 401SZQEJ8188 RECOMMENDED PANEL CUTOUT Panel thickness range - .047-.125 MODEL NO. 301 302 303 304 305 401 402 DIM. A DIM. B .108 .929 .085 .817 .085 .929 .085 .817 .108 .929 .145 1.142 .145 1.142 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C23 300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES DRY CKT. MODEL NO. 301SV30BEJ8488 302SV30BEJ8488 305SV30BEJ8488 ELECTRICAL FUNCTION MOM. S.P N.O. w/overtravel MOM. S.P N.O. no overtravel MOM. S.P N.O. w/added overtravel C MODEL NO. 301S 301S 302S 302S 305S 305S 302SV30BEJ8488 OPTION V30 V40 V30 V40 V30 V40 DIM. A .100 .100 .070 .070 .100 .100 PANEL CUTOUT DIM. B .900 1.020 .900 1.020 .900 1.020 DIM C. .780 .900 .780 .900 .780 .900 DIM D. .527 .647 .527 .647 .527 .647 DIM. E .237 .118 .125 .357 .237 .118 P.C. LAYOUT Right angle p.c. terminals - p.c. mounting bezel DRY CKT. MODEL NO. 301SV-1BEJ8488 302SV-1BEJ8488 305SV-1BEJ8488 401SV-1BEJ8488 402SV-1BEJ8488 302SV-1BEJ8488 MODEL NO. 301S 301S 302S 302S 305S 305S 401S & 402S 401S & 402S OPTION V V-1 V V-1 V V-1 V V-1 DIM. A .100 .100 .070 .070 .100 .100 .130 .130 ELECTRICAL FUNCTION MOM. S.P N.O. w/overtravel MOM. S.P N.O. no overtravel MOM. S.P N.O. w/added overtravel S.P Alternate action w/ tactile response MOM. S.P N.O. w/ tactile response DIM. B .960 .910 .860 .810 .960 .910 1.222 1.172 DIM C. 1.080 1.030 .980 .930 1.080 1.030 1.342 1.292 DIM D. .550 .550 .450 .450 .550 .550 .750 .750 DIM. E .150 .100 .150 .100 .150 .100 .150 .100 DIM. F .250 .250 .250 .250 .250 .250 .310 .310 Notes: Terminals are not fully bent, to facilitate spring retention in p.c. board. 401 & 402 ONLY C24 PANEL CUTOUT P.C. LAYOUT APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Straight p.c. terminals - p.c. mounting bezel 300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Snap-in bezel for round hole mounting Self-keying against rotation POWER CKT. MODEL NO. 301SZQEJ9688 302SZQEJ9688 303SZQEJ9688 304SZQEJ9688 305SZQEJ9688 401SZQEJ9688 402SZQEJ9688 DRY CKT. MODEL NO. 301SZBEJ9688 302SZBEJ9688 303SZBEJ9688 304SZBEJ9688 305SZBEJ9688 401SZBEJ9688 402SZBEJ9688 UL MODEL NO. 301SZQEJ9688/UL 302SZQEJ9688/UL 303SZQEJ9688/UL 304SZQEJ9688/UL 305SZQEJ9688/UL 401SZQEJ9688/UL 402SZQEJ9688/UL ELECTRICAL FUNCTION MOM. S.P N.O. w/overtravel MOM. S.P N.O. no overtravel MOM. S.P N.C. w/pretravel MOM. S.P N.C. no ptretravel MOM. S.P N.O. w/overtravel S.P Alternate snap-action MOM. S.P N.O. (snap-action) C 302SZQEJ9688 MODEL NO. 301 302 303 304 305 401 & 402 301, 302 305, 402 DIM. A DIM. B .108 .929 .085 .817 .085 .929 .085 .817 .108 .929 AS SHOWN 303, 304 401 RECOMMENDED PANEL CUTOUTS Panel thickness range - .047 - .125 401 & 402 ONLY DRILLED OR PUNCHED HOLE KEYED HOLE OPTIONS FOR SELECTIVE MODELS ONLY Options V30 & V40 Straight p.c. terminals w/bracket For models 301, 302 & 305 only MODEL NO. 301,305 301,305 302 302 OPTION V30 V40 V30 V40 DIM. A .527 .647 .527 .647 DIM. B .173 .173 .150 .150 DIM C. .933 1.053 .910 1.030 DIM D. .237 .118 .125 .357 TO SPECIFY, ADD OPTION FROM BOX TO SWITCH MODEL NO. - EXAMPLE: 302V30BE P.C. BOARD LAYOUT Options V & V-1 Right angle terminals w/bracket For models 301, 302, 305, 401 & 402 only MODEL NO. 301, 305 301, 305 302 302 401, 402 401, 402 OPTION V V-1 V V-1 V V-1 DIM. A .173 .173 .150 .150 .210 .210 DIM. B .439 .439 .327 .327 .653 .653 DIM C. .550 .550 .450 .450 .750 .750 DIM D. .700 .650 .600 .550 .900 .850 TO SPECIFY, ADD OPTION FROM BOX TO SWITCH MODEL NO. - EXAMPLE: 301V-1BE Support Bracket is Brass, Solder Coated. Available with B, N, or T Contact Materials. (See pg. C27) Supplied with Epoxy Sealed Terminals. Note: Terminals are not fully bent, to facilitate spring retention in p.c. board. P.C. BOARD LAYOUT APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C25 300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES OPTIONS FOR SELECTIVE MODELS ONLY MODEL NO. 301,305 303 A .250 .225 TO SPECIFY, ADD 'T1' TO SWITCH MODEL NO. - EXAMPLE: 301T1CQE6 Threaded bushing: Brass, nickel plated Actuator button: Nylon. Specify color - see order format. Supplied with 2 Hex Nuts, p/n A465 & 1 Lockwasher, p/n A466 (see Hardware section of catalog). Printed circuit or solder lug terminals available. C Option S Long actuator For models 301, 302, 303, 304, 305, 401 & 402 only TO SPECIFY, ADD 'S' TO SWITCH MODEL NO. - EXAMPLE: 301SCQE Actuator: Nylon Color: Black standard for 300 Series White standard for 400 Series. Other colors available - see options. 301 & 305 302, 303 & 304 401 & 402 Additional ordering information: Commonly ordered models are shown above and on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box with brief description - see option dwgs. & info. following. Notes: 'NONE' indicates box may be left empty. Not all combinations can be made - see other pages of Series. Model Structure: Series Actuators Bushings Terminations Contact materials Sealing E 3 3 3 3 3 3 4 4 0 0 0 0 0 0 0 0 1 2 3 4 5 6 1 2 (NONE) S Long (see dwg. specify for all models with bezels- not available for 306). Z Solder lug C Printed circuit (NONE) T 1 15/32" thd'd. (see dwg for 301, 303 & 305 only). V V - V V 3 4 Right angle p.c. term1 inals for 301, 302, 305, 401 & 402 only (see dwg.). B Gold Q Coin silver N Economy gold T Economy silver Epoxy terminal seal is standard 0 Straight p.c. terminals with 0 bracket for 301, 302 & 305 only (see dwg.). Options: Bezel& cap (NONE) J 6 1 J 8 1 J 8 4 J 9 6 Bezel color Snap-in w/LED Snap-in no LED P.C. style Snap-in (round hole) (NONE) 2 Black 6 Red 8 White Other Colors Available Cap color (NONE) 2 Black 6 Red 8 White Other Colors Available Recognitions Switch caps for switches without bezels also available - see Hardware section of catalog. (NONE) /U L Example of completely specified model number: 301SZQEJ8122/UL Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. C26 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Option T1 15/32" bushing mounts from front or rear of panel For models 301, 303 & 305 only 300 & 400 SERIES - MINIATURE PUSHBUTTON SWITCHES CONTACT MATERIAL OPTIONS B SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Q G N T Dry circuit - gold over nickel over brass. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 250,000 cycles minimum. Power circuit - coin silver. RATING: 1 Amp at 120 VAC or 28 VDC or 0.5 Amps at 250 VAC. ELECTRIC LIFE: 250,000 cycles minimum at full load. Also - 3 Amps at 120 VAC or 28 VDC or 1.5 Amps at 250 VAC. ELECTRIC LIFE: 10,000 cycles minimum at full load. Dry circuit or power circuit - gold over nickel over coin silver. Dry circuit - gold over nickel over coin silver. RATINGS & ELECTRIC LIFE: Same as B & Q above -i.e.- can be used in either dry circuit or power circuit, however once used in power circuit, switch cannot be re-used in dry circuit. This option permits customers to inventory one switch to satisfy either application, RATING: 0.4 Volt-Amps (VA) max. at 20 V max. Note- less gold than B option. ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. Power circuit - Silver plate over brass. RATING: 0.5 Amps at 120 VAC or 0.25 Amps at 250 VAC (resistive loads). ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. Solder dipped terminals and custom contact plating available - contact factory. UL OPTION /UL For power circuits - coin silver RATING: 1 Amp at 125 VAC or 0.25 Amps at 250 VAC (75% power factor). Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts (Q or G options). HARDWARE HARDWARE SUPPLIED (See Hardware section of catalog) Panel mounted 300 Series switches with threaded 1/4" bushing are supplied with 1 Hex Nut A112 and 1 Lockwasher A115. Panel mounted 300 Series switches with threaded 15/32" bushing are supplied with 2 Hex Nuts A465 and 1 Lockwasher A466. Panel mounted 306 Series switches with threaded 5/16" bushing are supplied with 1 Hex Nut A713 and 1 Lockwasher A734. Panel mounted 400 Series switches with threaded bushing are supplied with 1 Panel Dress Nut A274 and 1 Lockwasher A115. PANEL CUT-OUTS Accepts all 1/4" threaded bushings Accepts all 15/32" threaded bushings APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C27 C FEATURES MATERIALS ● Single pole single throw momentary action. Base: PBT thermoplastic, color black Bushing: Brass, nickel plated Actuator: ABS thermoplastic Terminals: Brass, silver plated Shorting Contact: Brass or phos. brz., silver plated ● Normally open and normally closed models. ● Permanent cap is standard. ● Single hole mounting w/mtg. nut & lk'wshr supplied. C GENERAL SPECIFICATIONS ELECTRICALS Contact rating: Insulation resistance: Dielectric withstanding voltage: Contact resistance: Electrical/Mechanical life: Contact bounce: MECHANICALS, THERMALS Plunger travel: Actuation force: Operating temperature range: SOLDERING Wave or hand soldering: Solvent washing: 300 mA @ 125 VDC 100 megohms min. (500 VDC) 500 VAC for 1 minute 25 milliohms max. at 1 amp, 5 VDC 10,000 cycles min. less than 10 milliseconds MPB1110: .063" (1.6mm) 300 grams ±150 grams -20 °C to +60 °C MPB1140: .078" (2mm) 235°C max. for 5 seconds max. Non-washable. Do not apply flux to terminals or switch mtg. surface MPB1110 NORMALLY OPEN Model No. MPB11102 MPB11106 SCHEMATIC MECHANICAL OUTLINE MPB1140 NORMALLY CLOSED C28 PANEL MTG. HOLE Model No. MPB11402 MPB11406 SCHEMATIC MECHANICAL OUTLINE Cap Color Black Red Cap Color Black Red PANEL MTG. HOLE APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MPB SERIES PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ! New IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS C FEATURES ● Single pole NO momentary action with double break. ● Totally sealed compact construction. ● Ergonomically sculptured bezels with colorful actuator selections. ● Excellent tactile feedback with precise actuation ELECTRICAL AND GENERAL SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Mechanical life: Total Travel: Operating force: Contact bounce: 500 mA at 48 VAC, 200 mA at 50 VDC or 200 mA at 250 VAC 50 milliohms maximum 1 gigohm min. at 500 VDC 1500 V rms min. 500,000 cycles min. at full load 1,000,000 cycles min. .059" (1.5mm) 14 ±4 oz. (4±1 N) 1 millisecond ENVIRONMENTAL SPECIFICATIONS Degree of protection: Shock resistance: Vibration resistance: Salt spray: Strength of mechanism: Operating temperature range: IP 67 100g per IEC 512-4, test 6c 10-500 Hz, 10g per IEC 512-4, test 6d Per IEC 512-6, test 11f IK06 per EN 50101, 1 joule (1 Nm) -40°C to +125°C MATERIALS Contacts : Actuator: Bushing/bezel: Case: Wire leads (F models): Hardware: Gold plated silver Polyamide 6/6 Zamac (with black finish on bezel) PBT UL94V-0 Stranded, 20 AWG, UL approved Supplied with 1 Hex Nut .629" (16mm) across flats and 1 'o'ring APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C29 ! New IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS C MODEL NO. ACT. COLOR IPR3SAD1 IPR3SAD2 BLUE BLACK IPR3SAD3 GREEN IPR3SAD5 YELLOW IPR3SAD6 RED IPR3SAD7/1 WHITE IPR3SAD9 ORANGE Flat Round - stranded 20 AWG wire leads MODEL NO. ACT. COLOR IPR3FAD1 IPR3FAD2 BLUE BLACK IPR3FAD3 GREEN IPR3FAD5 YELLOW IPR3FAD6 RED IPR3FAD7/1 WHITE IPR3FAD9 ORANGE Flat Square - solder lug terminals MODEL NO. ACT. COLOR IPC3SAD1 IPC3SAD2 BLUE BLACK IPC3SAD3 GREEN IPC3SAD5 YELLOW IPC3SAD6 RED IPC3SAD7/1 WHITE IPC3SAD9 ORANGE Flat Square - stranded 20 AWG wire leads MODEL NO. ACT. COLOR IPC3FAD1 IPC3FAD2 BLUE BLACK IPC3FAD3 GREEN IPC3FAD5 YELLOW IPC3FAD6 RED IPC3FAD7/1 WHITE IPC3FAD9 ORANGE Flat C30 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Round - solder lug terminals ! New IP SERIES - PUSHBUTTON SWITCHES FOR HARSH ENVIRONMENTS Additional ordering information: Commonly ordered models are shown on prior page with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Fill in boxes with allowable options shown below each respective box. Series I Bezel shape Electrical function Terminals 3 P R Round C Square Contacts Actuator color C A D Normally open (NO) S F Solder lugs Stranded wire leads Gold plated silver 1 2 3 5 6 7 9 / Blue Black Green Yellow Red 1 White Orange MOUNTING Panel cut-out Matrix mounting Back of panel space requirement TACTILE FEEDBACK Force (N) Switch cross section 4 Operating force vs. travel diagram Switching Point 0.7 1.1 1.5 Travel (mm) SEALING Per IP 67. Degree of protection provided by the enclosures of electric appliances according to IEC 529, DIN 40050 & NFC 20-010 shown below: IP 6 7 (ingress protection) Totally protected Protected against the effects of against dust immersion up to 1 meter of water (30 mins.) SOLDER LUG VERSION WIRE LEADS VERSION APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C31 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES C FEATURES ● Wave solderable. ● Compact case size & fully sealed for process compatibility. ● SPDT & DPDT momentary p.c. & panel mounting models. ● Models available with ESD protection up to 12 KV. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Washing: Gold plated brass: 100 mA at 30 VDC Silver or gold plated silver: 1 Amp at 120 VAC or 30 VDC 50 milliohms maximum 1000 megohms minimum 1000 V rms minimum 60,000 cycles minimum -20°C to +85°C Permissible with water, detergents and solvents. MATERIALS Contacts & Terminals: Actuator: Bracket: Case: Terminal seal: Hardware: Gold plated brass, silver or gold plated silver UL94V-0 polyamide, glass filled Tin plated steel UL94V-0 polyamide, glass filled or PES Epoxy 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY RECOGNITION Available with all models with silver or gold plated silver contacts and terminals, standard actuator and smooth bushing. UL marking supplied when specified - see Order Format. Plain bushing - straight p.c. terminals - gold plated brass contacts ON DOUBLE POLE MODEL NO. SP45P000000 CIRCUIT ON MOM 6.30 (.248) CIRCUIT SP35P000000 5.30 (.208) MOM 6.60 (.259) Button position: 1.60 DIA (.062 DIA) 11.35 (.446) 12.70 (.500) 1 2 4.70 (.185) 6.20 DIA (.244 DIA) 7.16 (.281) 3.10 DIA (.122 DIA) 10.80 (.425) SINGLE POLE MODEL NO. 3 1-3 1-2 4.25 (.167) Terminals connected: 4.70 (.185) SP C32 4.75 (.187) 4.75 (.187) 4.70 (.185) EPOXY 0.60 (.023) 0.60 (.023) DP APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES Plain bushing - bracket mounting - gold plated brass contacts 3.18 (.125) 4.70 (.185) 5.30 (.208) 15.75 (.620) CIRCUIT MOM CIRCUIT ON MOM 1 2 1-2 C 0.40 (.015) 1.17 (.046) 4.70 (.185) 3.18 (.125) 4.70 (.185) 1-3 4.70 (.185) Terminals connected: 3.18 (.125) 3 EPOXY Button position: 1.60 DIA (.062 DIA) 11.35 (.446) 15.75 (.620) 8.10 (.318) 15.75 (.620) DOUBLE POLE MODEL NO. SP45Y000000 5.90 (.232) ON 11.70 (.460) SP35Y000000 4.75 (.187) SP DP Plain bushing - horizontal right angle terminals - gold plated brass contacts CIRCUIT ON MOM 1.60 DIA (.062 DIA) 12.70 (.500) DOUBLE POLE MODEL NO. SP45W000000 4.70 (.185) 12.70 (.500) 9.50 (.374) MOM 12.70 (.500) ON 0.40 (.015) CIRCUIT SP35W000000 5.08 (.200) 3.10 DIA (.122 DIA) 6.10 (.240) SINGLE POLE MODEL NO. 6.20 DIA (.244 DIA) 12.70 (.500) 5.30 (.208) 7.16 (.281) EPOXY 11.65 (.468) 3.90 (.153) 1 0.60 (.023) 5.08 (.200) 3.90 (.153) 12.70 (.500) 1-2 2 6.90 (.271) 4.70 (.185) 4.70 (.185) SP DP Plain bushing - vertical right angle terminals - gold plated brass contacts 3 2 1 EPOXY 1-2 4.75 (.187) 11.35 (.446) 5.08 (.200) 3.81 (.150) 1-3 (.0 0.6 23 0 ) Button position: Terminals connected: 1.60 DIA (.062 DIA) 13.00 (.511) 3.10 (.122) DP 0.60 (.023) 6.60 (.259) 4.75 (.187) SP 3.81 (.150) CIRCUIT ON MOM 7.16 (.281) MOM 12.70 (.500) DOUBLE POLE MODEL NO. SP45WW00000 12.70 (.500) ON 12.70 (.500) CIRCUIT SP35WW00000 5.08 (.200) 5.30 (.208) 6.10 (.240) SINGLE POLE MODEL NO. 6.20 DIA (.244 DIA) 0.40 (.015) 3.10 DIA (.122 DIA) 3.81 (.150) 1-3 3.81 (.150) Terminals connected: 0.60 (.023) 3 3.81 (.150) Button position: 9.50 (.374) SINGLE POLE MODEL NO. CIRCUIT ON MOM 1-3 1-2 3.10 DIA (.122 DIA) 6.35 DIA-40UNS (1/4 40UNS) Button position: Terminals connected: 12.70 (.500) 1 2 3 10.80 (.425) 8.90 (.350) SP35S000077 4.56 (.179) Threaded bushing - solder lug terminals - gold plated brass contacts 6.60 (.259) EPOXY 0.60 (.023) 4.70 (.185) 2.45 (.096) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE MODEL NO. 6.20 DIA (.244 DIA) 7.16 (.281) 3.10 DIA (.122 DIA) 1.80 (.070) Keyway APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C33 SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES 6.35 DIA-40UNS (1/4 40UNS) CIRCUIT ON MOM 8.90 (.350) SP35P000077 Button position: Terminals connected: 1-3 1 1-2 2 6.60 (.259) 10.80 (.425) 12.70 (.500) 3 EPOXY 0.60 (.023) 4.25 (.167) 0.60 (.023) 4.70 (.185) 1.60 DIA (.062 DIA) 4.70 (.185) Keyway Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. (Allowable options are shown under each respective box). Model Structure: Series S Number of poles Electrical function Terminals P 3 4 5 Single pole Double pole ON MOM P S Y Straight pc Solder lug Straight pc with mounting bracket W 0 Horizontal right angle mounting W W Vertical right angle mounting Options: Contact & terminal materials 0 1 2 8 0 0 0 Actuators and bushings 0 0 Standard actuator w/smooth bushing Standard actuator w/smooth bushing & UL marking (UL available with silver or gold plated silver contacts & terminals only) 0 0 7 7 Standard actuator w/threaded bushing 0 2 7 6 Short actuator w/short smooth bushing (See actuator/ bushing drawings at bottom of this page) Brass, gold plated Silver Silver, gold plated Brass, gold plated, with, tin plated terminals 0 0 0 0 0 1 Example of completely specified model number: SP35Y080000 Caps available separately see option drawings on next page. OPTION DRAWINGS w/smooth bushing C34 4.20 (.165) 0077 Standard actuator w/threaded bushing 1.90 (.070) 4.25 (.167) 1.10 (.043) 1.90 (.074) 5.10 (.200) 2.45 (.096) 3.10 DIA (.122 DIA) 8.90 (.350) 7.16 (.281) 0000 Standard actuator TERMINAL OUTLINES 3.10 DIA (.122 DIA) 6.30 (.248) 3.10 DIA (.122 DIA) 4.56 (.179) ACTUATOR/BUSHING DRAWINGS 0.60 (.023) 0276 Short actuator with short smooth bushing S0 Solder lug P0 Straight printed circuit APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 3.10 DIA (.122 DIA) SINGLE POLE MODEL NO. C 4.56 (.179) Threaded bushing - straight p.c. terminals - gold plated brass contacts SP SERIES - WASHABLE MINIATURE SNAP-ACTION PUSHBUTTON SWITCHES OPTION DRAWINGS & MISCELLANEOUS CAPS Note: replace last '0' in p/n with color code. 10.00 DIA (.393 DIA) 9.40 DIA (.370 DIA) 5.00 (.196) 11.50x11.50 (.452 SQ) U910 U2340 1 2 3 4 5 6 7/1 9 DRESS NUTS Chrome plated For threaded bushing models only. U1636 15.50 DIA (.610 DIA) 10.50 DIA (.413 DIA) 6.50 DIA (.255 DIA) 8.00 (.314) 8.00 (.314) 6.35 DIA-40UNS (1/4-40UNS) U825 (for cap U3400) 2.20 DIA (.086 DIA) 5.80 (.228) 8.20 DIA (.322 DIA) 5.80 (.228) 13.50 DIA (.531 DIA) 6.20 (.244) 18.50 DIA (.728 DIA) (for cap U2510) blue black green grey yellow red white orange PANEL CUT-OUT 12.70 DIA (.500 DIA) 6.35 DIA-40UNS (1/4-40UNS) C Colors 11.50x11.50 (.452 SQ) 6.00 (.236) 4.00 (.157) U3400 U2900 3.00 (.118) 6.35 (.250) 3.30 (.129) U2130 10.00 (.393) 3.50 (.137) 2.70 (.106) 15.00 DIA (.590 DIA) 3.00 (.118) U2510 6.35 (.250) 7.50 (.295) 8.00 DIA (.314 DIA) 4.00 (.157) 3.30 (.129) U2400 8.20 (.322) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.00 DIA (.196) 5.20 (.204) 6.35 DIA-40UNS (1/4-40UNS) U840 (for cap U2900) For threaded bushing models ELECTROSTATIC PUSHBUTTON SWITCHES INSULATED Protects against electrostatic discharges (ESD) up to 12 KV. X978 - Consult factory APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C35 C FEATURES ● Single pole-double throw & double pole-double throw models with ON-MOM ON action. ● Epoxy terminal sealing standard. ● Panel and p.c. mounting models with compact miniature case size. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Total travel: Gold plated brass: 100 mA at 30 VDC Gold plated silver: 1A at 120VAC or 30VDC 50 milliohms maximum 1000 megohms minimum 1000 V rms minimum 60,000 cycles minimum at full load. -30°C to +65°C .019" (0.5mm) MATERIALS Contacts & Terminals: Actuator: Bushing: Housing: Case: Bracket: Terminal seal: Hardware: Gold plated brass or gold plated silver Polyamide, glass filled Nickel plated brass Stainless steel Diallyl phthalate Tin plated steel Epoxy 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. ABOUT THIS SERIES The material is organized in the following sequence: a. completely specified switch models. b. 'Build your own switch' order format. c. Options & miscellaneous Solder lug terminals - 1/4" (6.35mm) bushing - gold plated silver contacts CIRCUIT ON MOM Handle position: Keyway 1-3 4-6 4.75 (.187) 1-2 4-5 12.00 (.472) DP C36 0.60 (.023) 1 4.70 (.185) 2 12.00 (.472) MOM 3 3.70 (.145) DOUBLE POLE MODEL NO. 18545AD 1.00 (.039) ON Terms. connected: 4.00 DIA (.157 DIA) CIRCUIT 18535AD 8.00 (.314) SINGLE POLE MODEL NO. 13.20 (.519) 6.00 (.236) 6.35 DIA-40UNS (1/4-40UNS) 1.80 (.070) EPOXY 7.00 (.275) SP APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES 18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES Solder lug terminals - 1/4" (6.35mm) flatted bushing - gold plated silver contacts MOM 1-3 4-6 1.80 (.070) 1-2 4-5 7.00 (.275) 'D' flat 1 0.60 (.023) EPOXY 2 C 12.00 (.472) Handle position: 4.75 (.187) 3 3.70 (.145) CIRCUIT ON MOM 1.00 (.039) ON DOUBLE POLE MODEL NO. 18745AD 8.00 (.314) 18735AD Terms. connected: 5.70 (.224) CIRCUIT 4.70 (.185) 12.00 (.472) SP DP Straight p.c. terminals - 1/4" (6.35mm) bushing - gold plated silver contacts 4.00 DIA (.157 DIA) CIRCUIT MOM CIRCUIT ON MOM 1.60 DIA (.062 DIA) 4.75 (.187) 1-2 4-5 0.60 1 (.023) 12.00 (.472) Keyway 2 0.60 (.023) 3 4.10 (.161) 1-3 4-6 1.00 (.039) Handle position: 4.70 (.185) DOUBLE POLE MODEL NO. 18245AD 13.35 (.523) ON 8.00 (.314) 18235AD Terms. connected: 13.20 (.519) 6.00 (.236) SINGLE POLE MODEL NO. 4.70 (.185) 6.35 DIA-40UNS (1/4-40UNS) 4.70 (.185) 7.00 (.275) DP EPOXY 4.75 (.187) SP Straight p.c. terminals - 1/4" (6.35mm) flatted bushing - gold plated silver contacts MOM 1.60 DIA (.062 DIA) 1-2 4-5 0.60 (.023) 0.60 1 (.023) 7.00 (.275) 'D' flat EPOXY 2 4.70 (.185) 4.75 (.187) 3 4.10 (.161) 4.70 (.185) 12.00 (.472) SP DP Solder lug terminals - snap-in mounting - gold plated silver contacts 11.50 (.452) 11.50 (.452) CIRCUIT ON DOUBLE POLE MODEL NO. 18845AD+U912+U1202 MOM CIRCUIT ON MOM Handle position: 16.50 (.649) 18835AD+U912+U1202 1 1.80 (.070) 1-3 4-6 1-2 4-5 3.70 (.145) Terms. connected: 19.50 (.767) 4.10 (.161) 15.70 (.618) SINGLE POLE MODEL NO. 4.75 (.187) 7.00 (.275) 2 3 4.75 (.187) 0.60 (.023) 4.70 (.185) SP Above models have back bezel & cap 2.50 Maxi (.098 MAX) 1-3 4-6 1.00 (.039) Handle position: 2.00 (.078) CIRCUIT ON MOM 13.35 (.523) ON DOUBLE POLE MODEL NO. 18945AD 4.70 (.185) 5.70 (.224) CIRCUIT 18935AD Terms. connected: 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 6.00 (.236) SINGLE POLE MODEL NO. 4.00 DIA (.157 DIA) 8.00 (.314) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE MODEL NO. 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 6.00 (.236) 4.00 DIA (.157 DIA) 12.00 (.472) EPOXY DP 13.20 (.519) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C37 18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES PANEL CUT-OUTS for models shown above 15.00 (.590) 8.00 DIA (.314 DIA) 12.50 (.492) C 5.20 (.204) 2.70 (.106) 13.20 (.519) 1/4" (6.35mm) bushing 1/4" (6.35mm) flatted bush. Bezel U1200 Bezel U1210 w/LED Single pole - straight p.c. terminals - bracket mounting - gold plated brass contacts 6.25 DIA (.246 DIA) 4.00 DIA (.157 DIA) CIRCUIT ON MOM 1-3 1-2 3.18 (.125) 4.70 (.185) 13.00 (.511) Handle position: Terms. connected: 1.60 DIA (.062 DIA) EPOXY 1 4.10 (.161) 3.18 (.125) 0.40 (.015) 2 3 15.75 (.620) 15.75 (.620) 18235YCD3 6.80 5.50 (.267) (.216) SINGLE POLE MODEL NO. 1.27 (.050) 7.00 (.275) Double pole - straight p.c. terminals - bracket mounting - gold plated brass contacts 8.20 (.322) CIRCUIT MOM 1-3 4-6 1-2 4-5 4.70 (.185) Terms. connected: 1.60 DIA (.062 DIA) 3.18 (.125) 13.00 (.511) Handle position: EPOXY 1 4.70 (.185) 3.18 (.125) 0.40 (.015) 2 3 15.75 (.620) 1.27 (.050) 5.08 (.200) 4.00 DIA (.157 DIA) EPOXY DP C38 3 2 4.70 (.185) 13.20 (.519) 1 0.60 (.023) 1-2 4-5 3.81 (.150) 1-3 4-6 12.70 (.500) 0.40 (.015) 7.20 (.283) 0.60 (.023) Terms. connected: 1.60 DIA (.062 DIA) 12.70 (.500) Handle position: 11.00 (.433) 12.70 (.500) CIRCUIT ON MOM 4.70 (.185) MOM 0.40 (.015) ON DOUBLE POLE MODEL NO. 18245WCD3 8.60 (.338) CIRCUIT 6.25 DIA (.246 DIA) 5.50 (.216) 8.60 (.338) 12.00 (.472) 18235WCD3 4.75 (.187) 12.00 (.472) Horizontal right angle p.c. terminals - gold plated brass contacts SINGLE POLE MODEL NO. 15.75 (.620) ON 3.70 (.145) 7.00 (.275) 3.81 12.70 (.150) (.500) 18245YCD3 6.25 DIA (.246 DIA) 4.00 DIA (.157 DIA) 7.20 5.10 (.283) (.200) DOUBLE POLE MODEL NO. 5.08 (.200) 4.70 (.185) SP APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 15.00 (.590) 6.50 DIA (.255 DIA) 2.20 DIA (.086 DIA) 12.50 (.492) 6.50 DIA (.255 DIA) 18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES SPECIAL OPTIONS Special option X624 - straight p.c. terminals - short bushing & actuator - gold plated brass contacts 5.20 DIA (.204 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 3.80 (.149) 3.10 DIA (.122 DIA) 1.60 DIA (.062 DIA) 18235YCD2X624 ON DOUBLE POLE MODEL NO. 18245YCD2X624 CIRCUIT ON MOM 1 3.18 (.125) 0.40 (.015) 2 3 15.75 (.620) C 15.75 (.620) EPOXY MOM 1.27 (.050) 7.00 (.275) 8.20 (.322) 5.20 DIA (.204 DIA) 3.10 DIA (.122 DIA) 3.80 (.149) Handle position: Terms. connected: 1-3 4-6 4.70 (.185) 4.10 (.161) SP CIRCUIT 4.10 (.161) SINGLE POLE MODEL NO. 13.00 (.511) 3.18 (.125) 1-2 4-5 1.60 DIA (.062 DIA) EPOXY 1 4.70 (.185) 3.18 (.125) 0.40 (.015) 2 3 15.75 (.620) 1.27 (.050) 15.75 (.620) 4.70 (.185) 4.10 (.161) DP 13.00 (.511) 3.18 (.125) 4.75 (.187) 12.00 (.472) Special option X662 - straight p.c. terminals - snap-in mounting - gold plated brass contacts 19.50 (.767) Terms. connected: 1-3 4-6 1-2 4-5 7.00 (.275) X372 Short 1/4" (6.35mm) threaded bushing, .274" (7mm) long. X386 1/4" (6.35mm) threaded bushing in place of smooth bushing on models with W, WW & Y options. X438 .246" (6.25mm) smooth bushing without shoulder, .283" (7.2mm) long. 1.00 (.039) .246" (6.25mm) smooth bushing in place of standard threaded bushing. EPOXY DP X371 4.70 (.185) X372 6.25 DIA (.246 DIA) 6.35 DIA-40UNS (1/4-40UNS) X386 4.75 (.187) 6.35 DIA-40UNS (1/4-40UNS) 1.00 (.039) X371 12.00 (.472) 4.70 (.185) 6.25 DIA (.246 DIA) 6.00 (.236) Tin plated terminals (for p.c. terminals only). 4.75 (.187) 13.20 (.519) 9.00 (.354) F 3 0.60 (.023) SP OPTIONS 4.70 (.185) 2.00 (.078) 1 2 0.60 (.023) 1.00 (.039) Handle position: 1.60 DIA (.062 DIA) 7.00 (.275) CIRCUIT ON MOM 2.50 Maxi (.098 MAX) MOM 7.20 (.283) ON DOUBLE POLE MODEL NO. 18845CDX662+U910+U1200 17.80 (.700) 18835CDX662+U910+U1200 11.50 (.452) 11.50 (.452) 4.10 (.161) CIRCUIT 4.10 (.161) SINGLE POLE MODEL NO. 15.70 (.618) X438 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C39 18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Model Structure: Series 1 Terminals & bushings Number of poles Electrical function 8 Terminals 5 2 5 7 8 9 Straight p.c. terminals with 1/4" (6.35mm) threaded bushing. Straight p.c. terms. + bracket or right angle p.c. terms. with smooth bushing Solder lug terminals with 1/4" (6.35mm) threaded bushing Solder lug terminals with 1/4" (6.35mm) flatted bushing Solder lug terminals, snap-in mounting Straight p.c. terminals with 1/4" (6.35mm) flatted bushing (NONE) W W W Y ON - MOM 3 Single pole 4 Double pole Solder lug or straight p.c. Horizontal right angle p.c. Vertical right angle p.c. Bracket mounting Example of completely specified model number:18245AD Caps available separately see option drawings. Options: Contact materials Actuators A D Silver, gold plated C D Brass, gold plated Special options (NONE)) .157" (4mm) dia. x .236" (6mm) long (standard) with threaded bushing 6 .122" (3.1mm) dia. x .230" (5.85mm) with threaded bushing 3 .157" (4mm) dia. x .216" (5.5mm) long (standard) with smooth bushing 5 .122" (3.1mm) dia. x .248" (6.3mm) long (NONE) F Tin plated terminalsfor p.c. terms. only X 6 2 4 Shorter bushing & actuator X 6 6 2 Snap-in mounting & straight p.c. terminals Others listed - see Special Option page Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. 6 C40 1.00 (.039) 1.00 (.039) 3.70 (.145) 1.00 (.039) 1.80 (.070) 1 2 4.10 (.161) 3.70 (.145) 4.50 (.177) 9.00 (.354) 1.00 (.039) 2.00 (.078) TERMINALS 3.10 DIA (.122 DIA) 6.30 (.248) 5 9.00 (.354) 1.00 (.039) 7.20 (.283) 3 Standard with smooth bushing SWITCH ACTION 3.10 DIA (.122 DIA) 4.00 DIA (.157 DIA) 5.50 (.216) 4.00 DIA (.157 DIA) 1.00 (.039) 5.85 (.230) 9.00 (.354) 1.00 (.039) 7.65 (.301) 3.10 DIA (.122 DIA) 5.50 (.216) (NONE) Standard with threaded bushing 3.10 DIA (.122 DIA) 7.20 (.283) 4.00 DIA (.157 DIA) 1.00 (.039) 9.00 (.354) 1.00 (.039) 6.00 (.236) 4.00 DIA (.157 DIA) 7.20 (.283) 7.80 (.307) ACTUATOR OPTIONS 7.20 (.283) C Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. (Allowable options are shown under each respective box). Note: 'NONE' indicates box may be left empty. 0.60 (.023) 3 Arrow indicates keyway Solder lug Straight p.c. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES CAPS FOR .157" (4mm) DIA. ACTUATORS (13 & 3) Note: replace last '0' in p/n with color code. U480 11.50x11.50 (.452 SQ) 5.00 (.195) 11.50x11.50 (.452 SQ) U2430 Square FOR .122" (3.1mm) DIA. ACTUATORS (5 & 6) 9.40 DIA (.370 DIA) 3.30 (.129) 7.50 (.295) U2130 15.00 DIA (.590 DIA) 2.70 (.106) 5.00 (.196) 11.50x11.50 (.452 SQ) U2340 Square For models with threaded bushings (182.., 185.., 187.., & 189..) (Order separately) 8.20 DIA (.322 DIA) 6.20 (.244) 12.70 DIA (.500 DIA) 13.50 DIA (.531 DIA) 18.50 DIA (.728 DIA) 10.50 DIA (.413 DIA) 15.50 DIA (.610 DIA) U1636 For caps U1140 & U2510 8.00 (.314) 8.00 (.314) 6.35 DIA-40UNS (1/4-40UNS) 5.80 (.228) Chrome plated 5.80 (.228) DRESS NUTS 6.00 (.236) 4.00 (.157) U910 Square U2340 Square Note: replace '0' in p/n with color code. 11.50x11.50 (.452 SQ) 2.70 (.106) U910 Square 6.00 (.236) U3400 FOR 188.. & 188..X662 MODELS 11.50x11.50 (.452 SQ) 10.00 (.393) 3.50 (.137) 7.50 (.295) 3.00 (.118) U2900 11.50x11.50 (.452 SQ) 5.00 (.196) U2510 blue black green grey yellow red ivory white orange 6.35 (.250) 6.35 (.250) 3.00 (.118) 3.30 (.129) 10.00 DIA (.393 DIA) 10.00 DIA (.393 DIA) 1 2 3 4 5 6 7 7/1 9 Note: replace last '0' in p/n with color code. 4.00 (.157) 9.40 DIA (.370 DIA) U2020 Square 6.00 (.236) 4.00 (.157) Colors U630 U2400 C 3.00 (.118) 3.00 (.118) U1720 6.35 (.250) 7.50 (.295) 10.00 DIA (.393) 10.00 (.393) 3.00 (.118) 3.00 (.196) 15.00 DIA (.590 DIA) 6.35 (.250) U1140 3.00 (.118) 4.00 (.157) 3.30 (.129) U900 8.20 (.322) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 9.40 DIA (.370) 8.00 DIA (.314 DIA) 5.00 DIA (.196) 6.35 DIA-40UNS (1/4-40UNS) U840 For caps U480 & U2900 6.35 DIA-40UNS (1/4-40UNS) U825 For caps U630 & U3400 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C41 18000 SERIES - MINIATURE SNAP-ACTION MOMENTARY PUSHBUTTON SWITCHES BEZELS Note: replace last '0' in p/n with color code 12.10 (.476) 12.10 (.476) 12.10 (.476) 28.00 (1.102) U1200 U1210 For LED (not supplied) U3200 Colors 1 2 3 4 5 6 7 7/1 9 blue black green grey yellow red ivory white orange STANDARD PANEL MOUNTING FOR BEZELS 188.. + U910 + U1200 C42 2.00 (.078) 4.10 (.161) 2.00 (.078) 4.10 (.161) Panel thicknesses: .039" (1mm) to .098" (2.5mm) 188.. + U910 + U1210 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.00 DIA (.196 DIA) 12.10 (.476) 4.80 (.188) 15.70 (.618) 13.20 (.519) 12.10 (.476) 12.10 (.476) 15.70 (.618) 15.70 (.618) 9.75 (.383) C 19.50 (.767) 7.10 DIA (.279 DIA) 2.00 (.078) For bracket mtg. models (182..Y & 182..YX624) 5.00 (.196) 2.00 (.078) 19.50 (.767) 2.00 (.078) For snap-in models (188.. & 188..X662) C FEATURES ● Single pole-double throw & double pole-double throw models. ● ON-MOM and ON-ON alternate actions . ● 1/4-40 and 15/32-32 threaded bushing options. ● Panel and p.c. mounting models with compact miniature case size. SPECIFICATIONS Contact ratings (resistive loads): Gold plated brass: 0.4 Volt-Amps max. at 20 V (AC or DC) Silver: 3A 250VAC, 6A 125VAC or 4A 30VDC 10 milliohms maximum 1000 megohms minimum at 500 VDC 2000 V rms min. between terminals and frame. 1000 V rms between terminals. 30,000 cycles minimum at full load. -40°C to +85°C Pre-travel - .086" (2.2mm) Over-travel - .019" (0.5mm) Total-travel - .106" (2.7mm) Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Travel: MATERIALS Contacts & Terminals: Actuator: Bushing: Housing: Case: Terminal seal: Hardware: Gold plated brass or gold plated silver Nickel plated brass Nickel plated brass Stainless steel Diallyl phthalate Epoxy 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY LISTINGS To order switches marked UL, specify in approvals box of Order Format. Solder lug terminals - 1/4" (6.35mm) bushing - silver contacts CIRCUIT 8632AB 8636AB ON ON DOUBLE POLE MODEL NO. 8642AB 8646AB CIRCUIT ON MOM ON ON 4.00 DIA (.157 DIA) MOM ON 1.80 (.070) Terms. connected: Keyway 2-3 5-6 1-2 4-5 0.80 (.031) 4.00 (.157) 7.00 (.275) SP 1 2 3 0.50 (.019) 18.20 (.716) EPOXY 3.70 (.145) Actuator position: Note: Cap shown must be ordered separately. 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 7.20 (.283) SINGLE POLE MODEL NO. 6.30 (.248) 10.00 DIA (.393 DIA) 7.00 (.275) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES 4.75 (.187) 12.00 (.472) DP APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C43 8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES Straight p.c. terminals - 1/4" (6.35mm) bushing - silver contacts Actuator position: Terms. connected: EPOXY 1.10 (.043) 2-3 5-6 1-2 4-5 0.80 (.031) 3 1 2 0.50 (.019) 4.00 (.157) 7.00 (.275) Keyway 4.75 (.187) 4.75 (.187) 12.00 (.472) SP DP Horizontal right angle p.c. terminals - 1/4" (6.35mm) bushing - gold plated brass contacts 3.70 (.145) Keyway 12.70 (.500) 8.60 (.338) 0.40 (.015) 2 1 0.50 (.019) 4.00 (.157) 12.00 (.472) 3.81 12.70 (.150) (.500) 12.00 (.472) 1-2 4-5 5.08 (.200) 1.10 (.043) 2-3 5-6 3 3.81 (.150) 0.80 (.031) EPOXY 1.60 DIA (.062 DIA) 4.00 (.157) 12.70 (.500) 11.00 (.433) CIRCUIT ON MOM ON ON Actuator position: Terms. connected: 7.20 (.283) MOM ON 7.00 (.275) ON ON 8.60 (.338) DOUBLE POLE MODEL NO. 8442WCDB 8446WCDB 4.00 DIA (.157 DIA) CIRCUIT 5.08 (.196) 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 12.70 (.500) 8432WCDB 8436WCDB 6.30 (.248) 10.00 DIA (.393 DIA) SINGLE POLE MODEL NO. 1.60 DIA (.062 DIA) 4.00 (.157) 3.70 (.145) DP SP Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. (Allowable options are shown under each respective box). Note: 'NONE' indicates box may be left empty. Model Structure: Series Terminals Number of poles Electrical functions Terminals 8 4 6 Straight p.c. or right angle terminals Solder lug terminals 3 Single pole 4 Double pole 2 6 ON ON - MOM ON (NONE) Solder lug or straight p.c. W Right angle p.c. Options: Contact materials Actuators A Silver A D Silver, gold plated C D Brass, gold plated Sealing For 1/4" (6.35mm) bushings (NONE) Height .248" ( 6.3mm) 9 Height .346" (8.8mm) For 15/32" (11.9mm) bushings (NONE) Height .338" (8.6mm) 6 Height .275" (7mm) Example of completely specified model number: 8432WCDB C44 (NONE) No sealing B Epoxy sealed terminals K Front panel sealing with 'o'-ring & gasket Special options (NONE) X 7 1 8 15/32" (11.9mm) bushing X 9 3 4 15/32" (11.9mm) bushing & front panel sealing (NONE) U L Caps available separately see option drawings. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1.60 DIA (.062 DIA) 4.00 (.157) CIRCUIT ON MOM ON ON 19.50 (.767) DOUBLE POLE MODEL NO. 8442AB 8446AB 6.30 (.248) MOM ON 7.20 (.283) ON ON 7.00 (.275) 8432AB 8436AB 6.35 DIA-40UNS (1/4-40UNS) 13.20 (.519) 4.00 (.157) C 4.00 DIA (.157 DIA) CIRCUIT 4.00 (.157) 10.00 DIA (.393 DIA) SINGLE POLE MODEL NO. 8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES ACTUATOR OPTIONS For 1/4" (6.35mm) bushing 6.35 DIA-40UNS (1/4-40UNS) 6.35 DIA-40UNS (1/4-40UNS) 11.90 DIA-32UNS (15/32-32UNS) 11.90 DIA-32UNS (15/32-32UNS) 6.40 DIA (.251DIA) 4.00 DIA (.157 DIA) 8.60 (.338) 4.00 DIA (.157 DIA) 9 C 12.00 (.472) 12.00 (.472) 7.00 (.275) 14.20 (.559) 7.00 (.275) (NONE) Standard 7.00 (.275) 8.80 (.346) 6.30 (.248) 4.00 DIA (.157 DIA) 14.20 (.559) (NONE) Standard 6 MISCELLANEOUS PANEL CUT-OUTS SWITCH ACTION Arrow indicates keyway 6.50 DIA (.255 DIA) 2.20 DIA (.086 DIA) 5.20 (.204) 3 1 2 3 1 2 3 Function 2 (ON-MOM) 1/4" (6.35mm) Standard (With locking ring) SPECIAL OPTIONS 6.40 DIA (.251) Silver plated brass contacts. Contact ratings: 0.2A 250VAC, 0.4A 125VAC or 0.5A 30VDC. Electric life: 20,000 cycles min. Minimum quantity: 5,000 pieces. X718 Bushing 15/32" (11.9mm). For all basic models (solder lug, straight p.c. or right angle p.c.terminals). Available with actuators 13 & 6. Sealing option K available. Flatted 15/32" (11.9mm) bushing and front panel sealing with 2 'o'-rings. 7.00 (.275) X601 11.90 DIA-32UNS (15/32-32UNS) 12.00 DIA (.472 DIA) 10.50 (.413) Tin plated terminals (for p.c. terminals only). 12.50 (.492) F X934 1/4" (6.35mm) with K option 1 2 3 8 Maxi (.314 MAX) 2 2.70 (.106) 1.50 (.059) 1 Function 6 (ON-ON) 1.10 (.043) 6.50 DIA (.255 DIA) 5.10 (.200) X934 4.00 DIA (.157) 12.50 DIA (.492 DIA) 12.00 DIA (.472 DIA) 1.70 (.066) 3.50 DIA (.137 DIA) 12.00 (.472) 8.60 (.338) 11.90 DIA-32UNS (15/32-32UNS) 9.60 (.377) X718 2 3 15/32" (11.9mm) with locking ring Keyway or flat 15/32" (11.9mm) with K option 10.60 DIA (.417 DIA) SEALING OPTIONS 1 2 K 11.80 DIA (.464 DIA) 2Maxi (NONE) No sealing. B Epoxy sealed terminals. K Front panel sealing with'o'-ring and gasket.Protects against water and dust. Withstands 1 bar pressure when switch is operated. KB Combined sealings (above). 5.80 (.228) 6.40 DIA (.251 DIA) 1 5.10 (.200) 2.30 (.090) 11.00 (.433) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE For 15/32" (11.9mm) bushing APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C45 8000 SERIES - MINI. MOMENTARY OR ALTERNATE ACTION PUSHBUTTON SWITCHES CAPS 1 2 3 4 5 6 7/1 9 blue black green grey yellow red white orange 13.50 DIA (.531 DIA) 15.50 DIA (.610 DIA) 10.50 DIA (.413 DIA) C46 8.00 (.314) 6.35 DIA-40UNS (1/4-40UNS) 6.35 DIA-40UNS (1/4-40UNS) U1636 For cap U1140 6.00 (.236) 18.50 DIA (.728 DIA) 8.00 (.314) 8.20 (.322) 8.20 DIA (.322 DIA) 6.20 (.244) 12.70 DIA (.500 DIA) U825 For cap U630 5.80 (.228) DRESS NUTS (chrome plated) 6.35 DIA-40UNS (1/4-40UNS) U840 For cap U480 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.00 (.195) U2020 Square 7.50 (.295) 3.00 (.118) Colors 6.00 (.236) U2430 Square U480 Standard 11.50x11.50 (.452 SQ) 4.00 (.157) 3.00 (.196) U1720 11.50x11.50 (.452 SQ) 10.00 (.393) U630 6.35 (.250) 6.35 (.250) U1140 15.00 DIA (.590 DIA) 10.00 DIA (.393) 3.00 (.118) 3.00 (.118) U900 3.00 (.118) C 9.40 DIA (.370) 8.00 DIA (.314 DIA) 5.00 DIA (.196) 4.00 (.157) 3.30 (.129) Note: replace last '0' in p/n with color code. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES C FEATURES ● Dry circuit through power ratings . ● Ultra-rugged construction SPDT & DPDT momentary models with numerous options. ● Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPECIFICATIONS Contact ratings (resistive loads): Also see economy ratings N & T in options section. Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive loads): Operating temperature range: Total travel: Actuation force: (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC. (B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max. UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). UL file no. E66367. CSA models - coin silver: same ratings as UL models. CSA file no. LR54592-1. 20 milliohms max. at 3 VDC, 0.1 Amp. Greater than 200,000 megohms between terminals & case ground. Greater than 1500 VAC for 1 minute between terminals & case ground. 60,000 cycles min. at full load. -30°C to +85°C .035" (0.9mm) approx. Single pole: 290 ± 75 grams Double pole: 550 ± 75 grams MATERIALS Contacts: Actuator: Bushing: Strap: Case: Terminal seal: Support bracket: Spring mounting bracket: Bezel & cap: Hardware: LED: Coin silver for power,UL & CSA models. Gold over nickel over brass for dry circuit models. Glass filled polyester, color white Nickel plated brass Stainless steel Melamine phenolic, color red Epoxy (standard) Brass or steel, tin plated Stainless steel Nylon. Available in black, red & white. Consult factory for other colors. See 'Miscellaneous' section. Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. continuous forward current: 15 mA for red, 30 mA for green & 20 mA for yellow. Red is standard. Yellow & green are optional. Specifications are subject to change without notice - consult factory. AGENCY RECOGNITION UL, & CSA. Marking: Switches ordered with '/UL' added at end of model no. are supplied with recognition marked. Switches ordered with '/CSA' added at end of model no. are supplied with recognition marked. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format d. Option drawings & information e. Panel cut-outs c. Miscellaneous APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C47 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Solder lug terminals - panel mounting POWER CKT. MODEL NO. 810KMZQ UL MODEL NO. 810KMZQ/UL C DOUBLE POLE POWER CKT. MODEL NO. 820KMZQ UL MODEL NO. 820KMZQ/UL Horizontal right angle p.c. terminals p.c. mounting SINGLE POLE DRY CKT. MODEL NO. 810KSAB 810KSA-1B UL MODEL NO. 810KSAQ/UL 810KSA-1Q/UL DOUBLE POLE DRY CKT. MODEL NO. 820KSAB 820KSA-1B C48 UL MODEL NO. 820KSAQ/UL 820KSA-1Q/UL APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Vertical right angle p.c. terminals - p.c. mounting SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE DRY CKT. MODEL NO. 810KSVB 810KSV-1B 810KSV-2B UL MODEL NO. 810KSVQ/UL 810KSV-1Q/UL 810KSV-2Q/UL C DOUBLE POLE DRY CKT. MODEL NO. 820KSVB 820KSV-1B 820KSV-2B UL MODEL NO. 820KSVQ/UL 820KSV-1Q/UL 820KSV-2 Q/UL Straight p.c. terminals with bracket SINGLE POLE DRY CKT. MODEL NO. 810KSV30B 810KSV40B UL MODEL NO. 810KSV30Q/UL 810KSV40Q/UL DOUBLE POLE DRY CKT. MODEL NO. 820KSV30B 820KSV40B UL MODEL NO. 820KSV30Q/UL 820KSV40Q/UL APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C49 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Solder lug terminals - snap-in bezel with outboard LED POWER CKT. MODEL NO. 810K2M1ZQJ6122 810K1M1ZQJ6122 UL MODEL NO. 810K2M1ZQJ6122/UL 810K1M1ZQJ6122/UL DIM. A .100 .010 Models listed above have black bezel and cap. C DOUBLE POLE POWER CKT. MODEL NO. 820K2M1ZQJ6122 820K1M1ZQJ6122 UL MODEL NO. 820K2M1ZQJ6122/UL 820K1M1ZQJ6122/UL DIM. A .100 .010 Models listed above have black bezel and cap. Solder lug terminals - snap-in bezel SINGLE POLE POWER CKT. MODEL NO. 810K2M1ZQJ8122 810K1M1ZQJ8122 UL MODEL NO. 810K2M1ZQJ8122/UL 810K1M1ZQJ8122/UL DIM. A .100 .010 Models listed above have black bezel and cap. DOUBLE POLE POWER CKT. MODEL NO. 820K2M1ZQJ8122 820K1M1ZQJ8122 UL MODEL NO. 820K2M1ZQJ8122/UL 820K1M1ZQJ8122/UL DIM. A .100 .010 Models listed above have black bezel and cap. C50 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Straight p.c. terminals - p.c. mounting bezel SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE DRY CKT. MODEL NO. 810K2M1CBJ8422 810K1M1CBJ8422 UL MODEL NO. 810K2M1CQJ8422/UL 810K1M1CQJ8422/UL DIM. A .100 .010 UL MODEL NO. 820K2M1CQJ8422/UL 820K1M1CQJ8422/UL DIM. A .100 .010 C DOUBLE POLE DRY CKT. MODEL NO. 820K2M1CBJ8422 820K1M1CBJ8422 Models listed above have black bezel and cap. Straight p.c. terminals w/bracket - p.c. mounting bezel SINGLE POLE DRY CKT. MODEL NO. 810K2M1V30BJ8422 810K1M1V30BJ8422 DIM. UL MODEL NO. A 810K2M1V30QJ8422/UL .100 810K1M1V30QJ8422/UL .010 DOUBLE POLE DRY CKT. MODEL NO. 820K2M1V30BJ8422 820K1M1V30BJ8422 DIM. UL MODEL NO. A 820K2M1V30QJ8422/UL .100 820K1M1V30QJ8422/UL .010 Models listed above have black bezel and cap. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C51 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Horizontal right angle p.c. terminals - p.c. mounting bezel DRY CKT. MODEL NO. 810K2M1ABJ8422 810K1M1ABJ8422 UL MODEL NO. 810K2M1AQJ8422/UL 810K1M1AQJ8422/UL DIM. A .100 .010 UL MODEL NO. 820K2M1AQJ8422/UL 820K1M1AQJ8422/UL DIM. A .100 .010 C DOUBLE POLE DRY CKT. MODEL NO. 820K2M1ABJ8422 820K1M1ABJ8422 Models listed above have black bezel and cap. Poles SP SP DP DP Option A A-1 A A-1 Dim. B .148 .164 .250 .266 Dim. C .045 max. .095 max. .300 max. .350 max. Vertical right angle p.c. terminals - p.c. mounting bezel SINGLE POLE DRY CKT. MODEL NO. 810K2M1V-1BJ8422 810K1M1V-1BJ8422 DIM. UL MODEL NO. A 810K2M1V-1QJ8422/UL .100 810K1M1V-1QJ8422/UL .010 DOUBLE POLE DRY CKT. MODEL NO. 820K2M1V-1BJ8422 820K1M1V-1BJ8422 DIM. UL MODEL NO. A 820K2M1V-1QJ8422/UL .100 820K1M1V-1QJ8422/UL .010 Models listed above have black bezel and cap. C52 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES Snap-in bezel for round hole mounting Self-keying against rotation SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE POWER CKT. MODEL NO. 810K2M1ZQJ9622 810K1M1ZQJ9622 UL MODEL NO. 810K2M1ZQJ9622/UL 810K1M1ZQJ9622/UL DIM. A .100 .010 C DOUBLE POLE POWER CKT. MODEL NO. 820K2M1ZQJ9622 820K1M1ZQJ9622 UL MODEL NO. 820K2M1ZQJ9622/UL 820K1M1ZQJ9622/UL DIM. A .100 .010 Models listed above have black bezel and cap. Additional ordering information: Commonly ordered models are shown above and on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box with brief description - see option dwgs. & info. following. Note: 'NONE' indicates box may be left empty. Model Structure: Series Single pole: 8 1 0 Double pole: 8 2 0 Actuators Bushings K Standard K 1 Short K 2 Medium M M D S Terminations Standard 1/4" thd'd. 1 Short 1/4" thd'd. 1/4" thd'd. w/'D' flat Non-threaded Notes: When bezel is specified and flush cap is desired, specify K1 actuator and M1 bushing. When bezel is specified and raised cap is desired, specify K2 actuator and M1 bushing. Epoxy terminal seal is standard on 800 Series. Options: Bezel& cap (NONE) J 6 1 J 8 1 J 8 4 J 9 6 Bezel color Cap color Approvals (NONE) (NONE) (NONE) 2 Black Snap-in w/LED 2 Black / U L 6 Red Snap-in no LED 6 Red / C S A 8 White P.C. style 8 White Snap-in (round hole) Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. Contact materials B Gold Z Solder lug Q Coin silver C Printed circuit G Gold over W Wirewrap coin silver W 1 Lg. wirewrap N Economy W 3 Sht. wirewrap gold X Extra lg. wirewrap T Economy Horiz. right angle p.c. silver terminals: A A - 1 Vertical right angle p.c. terminals: V V - 1 V - 2 Straight p.c. terminals w/brkt.: V 3 0 or V 3 1 V 4 0 or V 4 1 V 7 0 Example of completely specified V 8 0 model number: V 7 1 820K1M1ZQJ8126/UL/CSA V 8 1 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C53 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES MISCELLANEOUS HARDWARE SUPPLIED (See Hardware section of catalog) SWITCH Switches with D option bushings are supplied with (2) A112 Hex Nuts and (1) A115 Lockwasher. CROSS C SECTION Switches with M1 option bushings are supplied with (1) A112 Hex Nut and (1) A115 Lockwasher. COMM NO Note: Switches with non-threaded bushings or bezels supplied without hardware. NC SIDE VIEW SIDE VIEW FRONT VIEW SINGLE POLE DOUBLE POLE SINGLE AND DOUBLE POLE SWITCH BODY SIZES WITH TERMINAL LOCATION DIMENSIONS BUSHING OPTIONS M & M1 D S THREADED THREADED NOTE: BUSHING M AND ACTUATOR K ARE STANDARD. NON-THREADED ACTUATOR/BUSHING OPTIONS BUSHING OPTION DIM. B DIMENSION A ACTUATOR OPTION K K1 K2 M or D S M1 .250 .250 .154 .230 .230 .322 .069 .069 .165 .168 .168 .264 All bushings have 1/4-40 UNS-2A thread except S which is non-threaded. Switch caps for switches without bezels also available see Hardware section of catalog. C54 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Switches with M option bushings are supplied with (2) A112 Hex Nuts, (1) A115 Lockwasher and (1) A107 Anti-rotate Ring. TYPICAL 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE TERMINATION OPTIONS A A-1 SINGLE POLE HORIZONTAL P.C. MOUNTING SINGLE POLE HORIZONTAL P.C. MOUNTING A A-1 DOUBLE POLE HORIZONTAL P.C. MOUNTING Option V V-1 V-2 Dim. A .550 .500 .500 DOUBLE POLE HORIZONTAL P.C. MOUNTING FRONT VIEW SINGLE POLE V, V-1 & V-2 C FRONT VIEW DOUBLE POLE SIDE VIEW - SINGLE & DOUBLE POLE Dim. B .150 .150 .100 VERTICAL P.C. MOUNTING V30, V40, V70, V80, V31, V41, V71 & V81 PANEL LAYOUT V30, V31, V40 & V41 Option Dim. A V30-V31 .527 V40-V41 .647 Dim. B .024 .048 PANEL LAYOUT V70, V71, V80 & V81 Option V70-V71 V80-V81 Dim. A .630 .953 V31, V41, V71 & V81 ARE THE SAME AS V30, V40, V70 & V80 RESPECTIVELY, EXCEPT WITH CRIMPED LEG DESIGN FOR P.C. BOARD RETENTION, AS SHOWN TO RIGHT. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C55 800 SERIES - SNAP-ACTING MINIATURE PUSHBUTTON SWITCHES TERMINATION OPTIONS (CONT'D.) C W W1 W3 SOLDER LUG PRINTED CIRCUIT WIREWRAP LONG WIREWRAP SHORT WIREWRAP X C EXTRA LG. WIREWRAP CONTACT MATERIAL OPTIONS B Dry circuit - gold over nickel over brass. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 60,000 cycles minimum. MECHANICAL LIFE: 500,000 cycles minimum. Q Power circuit - coin silver. RATING: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads). ELECTRIC LIFE: 60,000 cycles minimum at full load. G Dry circuit or power circuit - gold over nickel over coin silver. RATINGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit, switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer to inventory only one switch for both. N Dry circuit - gold over nickel over brass. Note- less gold than B option. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. T Power circuit - Silver plate over brass. RATING: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (resistive loads). ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. Solder dipped terminals and custom contact plating available - contact factory. UL & CSA OPTIONS UL For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts (Q or G options). CSA For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Canadian Standards Association file no. LR54592-1. Note - applicable only to terminations with coin silver contacts (Q or G options) as CSA recognizes switches for power applications only. Note- Double pole switches with solder lug terminals are not CSA recognized . PANEL CUT-OUTS Cut-outs that accept all 1/4-40 threaded bushings: Without keying C56 With A107 anti-rotate With A158 anti-rotate With D bushing ring ring With slotted keyway bushings Accepts all 1/4" nonthreaded bushings APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Z SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES C FEATURES ● Dry circuit through power ratings . ● Rugged construction SPDT momentary models with numerous options. ● Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life (resistive loads): Operating temperature range: Total travel & operating force: (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC. (B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max. UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). UL file no. E66367. CSA models - coin silver: same ratings as UL models. CSA file no. LR54592-1. 5 milliohms max. at 3 VDC, 0.1 Amp. Greater than 200,000 megohms between terminals & case ground. Greater than 2000 VAC for 1 minute between terminals & case ground. 100,000 cycles min. at full load. -30°C to +85°C .065" (1.6mm) & 19 oz. (approximate values ). MATERIALS Contacts: Actuator: Bushing: Strap: Case: Terminal seal: Support bracket: Spring mounting bracket: Bezel & cap: Hardware: LED: AGENCY RECOGNITION Coin silver for power,UL & CSA models. Gold over nickel over brass for dry circuit models. Glass filled polyester, color white Nickel plated brass Stainless steel Melamine phenolic, color red Epoxy (optional) Brass or steel, tin plated Stainless steel Nylon. Available in black, red or white. Consult factory for other colors. See 'Miscellaneous' section. Intensity: 2.0 mcd at 10 mA. Forward voltage: 2.0V (3.0V max.). Max. continuous forward current: 15 mA for red, 30 mA for green & 20 mA for yellow. Red is standard. Yellow & green are optional. Specifications are subject to change without notice - consult factory. UL, & CSA. Marking: Switches ordered with '/UL' added at end of model no. are supplied with recognition marked. Switches ordered with '/CSA' added at end of model no. are supplied with recognition marked. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format d. Option drawings & information e. Panel cut-outs & miscellaneous c. Miscellaneous APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C57 PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES POWER CKT. MODEL NO. PB1-3P2Y1ZQ DRY CKT. MODEL NO. PB1-3P2Y1ZB C P.C. or wirewrap terminals - panel or p.c. mounting POWER CKT. MODEL NO. PB1-3P2Y1CQ DRY CKT. MODEL NO. PB1-3P2Y1CB Horizontal right angle p.c. terminals - p.c. mounting POWER CKT. MODEL NO. PB1-3P2Y2A-1Q DRY CKT. MODEL NO. PB1-3P2Y2A-1B Vertical right angle p.c. terminals - p.c. mounting POWER CKT. MODEL NO. PB1-3P2Y2V-1Q C58 DRY CKT. MODEL NO. PB1-3P2Y2V-1B APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Solder lug terminals - panel mounting PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Straight p.c. terminals with bracket - p.c. mounting POWER CKT. MODEL NO PB1-3P2Y2V30Q DRY CKT. MODEL NO. PB1-3P2Y2V30B C Solder lug terminals - snap-in bezel with LED POWER CKT. MODEL NO. PB1-3P2Y1ZQJ6168 DRY CKT. MODEL NO. PB1-3P2Y1ZBJ6168 Solder lug terminals - snap-in bezel POWER CKT. MODEL NO. PB1-3P2Y1ZQJ8182 DRY CKT. MODEL NO. PB1-3P2Y1ZBJ8182 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C59 PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES C POWER CKT. MODEL NO. PB1-3P2Y1CQJ8488 DRY CKT. MODEL NO. PB1-3P2Y1CBJ8488 Straight p.c. terminals with bracket - p.c. mounting bezel POWER CKT. DRY CKT. MODEL NO. MODEL NO. PB1-3P2Y1V30QJ8488 PB1-3P2Y1V30BJ8488 C60 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Straight p.c. terminals - p.c. mounting bezel PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Horizontal right angle p.c. terminals - p.c. mounting bezel C POWER CKT. MODEL NO. PB1-3P2Y1A-1QJ8488 Option A A-1 Dim. A .148 .164 DRY CKT. MODEL NO. PB1-3P2Y1A-1BJ8488 Dim. B .045 max. .095 max. Vertical right angle p.c. terminals - p.c. mounting bezel POWER CKT. MODEL NO. PB1-3P2Y1V-1QJ8488 DRY CKT. MODEL NO. PB1-3P2Y1V-1BJ8488 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C61 PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES Solder lug terminals - snap-in bezel for round hole mounting SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Self-keying against rotation C POWER CKT. MODEL NO. PB1-3P2Y1ZQJ9688 DRY CKT. MODEL NO. PB1-3P2Y1ZBJ9688 Additional ordering information: Commonly ordered models are shown above and on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box with brief description - see option dwgs. & info. following. Note: 'NONE' indicates box may be left empty. Model Structure: Series P B 1 Actuators - Bushings Terminations Note: When bezel is specified, specify P2 actuator and Y1 bushing. Y Y 1/4" thd'd. 1 Short 1/4" thd'd. (standard) D 1/4" thd'd. w/'D' flat Y 2 Non-threaded P Long P 2 Short (standard) Options: Bezel& cap (NONE) J 6 1 J 8 1 J 8 4 J 9 6 Bezel color Snap-in w/LED Snap-in no LED P.C. style Snap-in (round hole) (NONE) 2 Black 6 Red 8 White cap color (NONE) 2 Black 6 Red 8 White Approvals (NONE) / U L / C S A Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. C62 Contact materials 3 B Gold Z Solder lug Q Coin silver C Printed circuit G Gold over W Wirewrap coin silver W 1 Lg. wirewrap N Economy W 3 Sht. wirewrap gold X Extra lg. wirewrap T Economy Horiz. right angle p.c. silver terminals: A A - 1 Vertical right angle p.c. terminals: V V - 1 V - 2 Straight p.c. terminals w/brkt.: V 3 0 or V 4 1 V 4 0 or V 4 1 V 7 0 Example of completely specified V 8 0 model number: V 7 1 PB1-3P2Y1ZQJ9622/UL/CSA V 8 1 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES MISCELLANEOUS HARDWARE SUPPLIED (See Hardware section of catalog) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Switches with Y option bushings are supplied with (2) A112 Hex Nuts, (1) A115 Lockwasher and (1) A107 Anti-rotate Ring. Switches with D option bushings are supplied with (2) A112 Hex Nuts and (1) A115 Lockwasher. TYPICAL SWITCH CROSS C SECTION Switches with Y1 option bushings are supplied with (1) A112 Hex Nut and (1) A115 Lockwasher. Note: Switches with non-threaded bushings or bezels supplied without hardware. ACTUATOR/BUSHING OPTIONS Drawings reflect allowable actuator/bushing combinations. Note for drawings P2Y1 & P2Y2: Asterisk indicates .290 flats are supplied with options A, V, V30, V40, V70, V71, V80 & V81. For other options, .320 Dia. with no flats may be supplied PY THREADED P2Y1 THREADED P2Y2 NON-THREADED PD THREADED TERMINATION OPTIONS A A-1 HORIZONTAL P.C. MOUNTING HORIZONTAL P.C. MOUNTING APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C63 PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES TERMINATION OPTIONS (CONT'D.) V, V-1 & V-2 Dim. A .550 .500 .500 Dim. B .150 .150 .100 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Option V V-1 V-2 C VERTICAL P.C. MOUNTING V30, V40, V70, V80, V31, V41, V71 & V81 PANEL LAYOUT V30, V31, V40 & V41 Option Dim. A V30-V31 .527 V40-V41 .647 Dim. B .024 .048 PANEL LAYOUT V70, V71, V80 & V81 Option V70-V71 V80-V81 Dim. A .630 .953 V31, V41, V71 & V81 ARE THE SAME AS V30, V40, V70 & V80 RESPECTIVELY, EXCEPT WITH CRIMPED LEG DESIGN FOR P.C. BOARD RETENTION, AS SHOWN TO RIGHT. Z C W W1 W3 SOLDER LUG PRINTED CIRCUIT WIREWRAP LONG WIREWRAP SHORT WIREWRAP C64 X EXTRA LG. WIREWRAP APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 PB SERIES - MINIATURE MOMENTARY PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE CONTACT MATERIAL OPTIONS B Dry circuit - gold over nickel over brass. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 60,000 cycles minimum. MECHANICAL LIFE: 500,000 cycles minimum. Q Power circuit - coin silver. RATING: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads). ELECTRIC LIFE: 60,000 cycles minimum at full load. G Dry circuit or power circuit - gold over nickel over coin silver. RATINGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit, switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer to inventory only one switch for both. N Dry circuit - gold over nickel over brass. Note- less gold than B option. RATING: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. T Power circuit - Silver plate over brass. RATING: 1 Amp at 125 VAC or 0.5 Amps at 250 VAC (resistive loads). ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. C Solder dipped terminals and custom contact plating available - contact factory. UL & CSA OPTIONS UL For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Underwriter Laboratories file no. E66367. Note - applicable only to terminations with coin silver contacts (Q or G options). CSA For power circuits - coin silver RATING: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Canadian Standards Association file no. LR54592-1. Note - applicable only to terminations with coin silver contacts (Q or G options) as CSA recognizes switches for power applications only. EPOXY SEALING OPTION E REVERSE ACTION OPTION /R Space between terminals and case hole is completely epoxy sealed to prevent flux and contaminant entry. To reverse the NO and NC terminals, add /R to the switch model number. PANEL CUT-OUTS Cut-outs that accept all 1/4-40 threaded bushings: Without keying With A107 anti-rotate With A158 anti-rotate With D bushing ring ring With slotted keyway bushings Accepts all 1/4" nonthreaded bushings MISCELLANEOUS QUICK-CONNECT RECEPTACLES that are compatible with solder lug or p.c. terminals are commercially available. Consult factory. FRONT PANEL SEAL: Silicone rubber boots for front panel sealing of the switch against high pressure water or other contaminants are available. See Waterproof Switch Sealing Boots section in catalog. SWITCH CAPS for switches without bezels also available - see Hardware section of catalog APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C65 C FEATURES ● Quick break momentary action. ● SPDT & DPDT models with 1/4" threaded bushing (also see optional 15/32" bushing). ● Models for panel and p.c. mounting. ● Bright chrome or matte black finish on bushing, actuator & hardware. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Low level or mechanical life: Total Travel: Operating temperature range: Silver & gold plated silver; 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps at 30 VDC. (300 mA 30 VDC max. to prevent damage to gold plating.) Gold plated brass; 100 mA at 30 V max. 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 2000 V rms min. - between poles and terminals and frame Silver: 50,000 cycles min. Gold plated silver: 20,000 cycles min. Gold plated brass: 50,000 cycles min. 150,000 cycles min. .078" (2mm) -40°C to +85°C MATERIALS Contacts : Actuator: Bushing: Housing: Case: Terminal seal: Hardware: Silver, gold plated silver or gold plated brass Chrome plated brass Nickel plated brass Nickel plated brass Diallyl phthalate (DAP) Epoxy 1/4" threaded bushing models supplied with 2 Hex Nuts .314" (8mm) across flats, 1 Locking Ring & 1 Lockwasher. See hardware section of catalog. AGENCY RECOGNITION CECC, LNZ, GAM T1, QPL (Europe), MUAHAG Availability: Consult factory for details of recognized models. Marking:To order switches marked CECC, complete the appropriate box of the ordering format. Other listings do not appear on the switches. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Option drawings C66 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 13000 SERIES - PROFESSIONAL PUSHBUTTON SWITCHES 13000 SERIES - PROFESSIONAL PUSHBUTTON SWITCHES Solder lug terminals - silver contacts CIRCUIT CIRCUIT ON MOM 8.00 (.314) MOM 1 2 3 13.40 (.527) DOUBLE POLE MODEL NO. 13445A 0.70 (.027) ON 6.30 (.248) 13435A C Handle position: EPOXY 4.00 (.157) 1-2 4-5 6.00 (.236) 0.50 (.019) DP SP Straight p.c. terminals - silver contacts CIRCUIT DOUBLE POLE MODEL NO. 13245A MOM CIRCUIT ON MOM 1.6 DIA (.062 DIA) 1 2 3 0.70 (.027) ON 6.30 (.248) 13235A 8.00 (.314) 13.40 (.527) SINGLE POLE MODEL NO. 4.00 DIA (.157 DIA) 6.00 (.236) 14.00 (.551) 6.00 (.236) Handle position: EPOXY 1-2 4-5 0.50 (.019) 6.00 (.236) Keyway 1.00 (.039) 4.00 (.157) 1-3 4-6 4.00 (.157) 9.50 (.374) Terms. connected: 4.00 (.157) Keyway 2.50 (.098) 5.00 (.196) 1-3 4-6 6.35 DIA-40UNS (1/4-40UNS) Terms. connected: SP DP MOM 8.00 (.314) 5.08 (.200) 1 2 3 2.60 (.102) 1-2 9.27 (.364) 1-3 0.70 (.027) Terms. connected: 13.40 (.527) Handle position: 1.00 (.039) 4.00 (.157) 0.50 (.019) 4.00 (.157) 9.27 (.364) ON 4.00 DIA (.157 DIA) 0.40 (.015) 13435WA CIRCUIT 6.35 DIA-40UNS (1/4-40UNS) SINGLE POLE MODEL NO. 6.00 (.236) Horizontal right angle p.c. terminals - silver contacts 5.90 (.232) 4.40 (.173) 4.00 (.157) 1.60 DIA (.062 DIA) EPOXY Keyway 13445A9X768 Handle position: Terms. connected: MOM 4.00 (.157) 7.50 (.295) CIRCUIT ON CIRCUIT ON MOM 1-3 4-6 1-2 4-5 Contact and finish options available. Flat 3 2 1 12.00 DIA (.472 DIA) 1.50 (.059) With long actuator MODEL NO. 8.00 DIA (.314 DIA) 14.20 (.559) 13445A4X768 8.00 DIA (.314 DIA) EPOXY 2.50 (.098) 5.00 (.196) With short actuator MODEL NO. 11.9 DIA 32UNS (.468-32UNS) X768 - Sealed double pole with 15/32" (11.9mm) flatted bushing 9.00 (.354) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SINGLE POLE MODEL NO. 6.00 (.236) 14.00 (.551) 6.35 DIA-40UNS (1/4-40UNS) 4.00 DIA (.157 DIA) 4.00 (.157) 0.50 (.019) 6.00 (.236) 5.10 (.200) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C67 13000 SERIES - PROFESSIONAL PUSHBUTTON SWITCHES PANEL CUT-OUTS Standard 1.20 (.047) 2.70 (.106) with K sealing option 5.00 (.196) 1.70 (.066) 2.70 (.106) 1.10 (.043) C 5.20 (.204) with X640 sealing option (see Special Options) 1.00 (.039) 2.50 (.098) Solder Lug Straight p.c. Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Terminals & bushings Number of poles Electrical functions Terminals Contact materials 1 3 3 Single pole 2 Straight p.c. 4 Double pole terminals, 1/4" (6.35mm) bushing 4 Solder lugs, 1/4" (6.35mm) or 15/32" (11.9mm) bushing. Right angle terminals,1/4" (6.35mm) bushing 5 ON - MOM (NONE) Solder lugs or straight p.c. W Horizontal right angle p.c. A Silver A D 2 Gold plated silver (2 microns) C D Gold plated brass Options: Actuators Finish (NONE) Standard for 1/4" bushing 4 .157" (4mm) long for 15/32" (11.9mm) bushing (X768) 9 .354" (9mm) long for 15/32" (11.9mm) bushing (X758) Sealing (NONE) Bright chrome finish G Matte black finish on bushing, actuator & hardware. (NONE) Epoxy sealed terminals std'd. K Front panel sealing with o-ring & gasket. Example of completely specified model number: 13235AGKFCECC Special options (NONE) F Tin plated terminals (p.c. only) X 7 6 8 15/32" (11.9mm) bushing + front panel sealing (Double pole only). Approvals/listings (NONE) C E C C (consult factory for details of approved models). Caps available separately see option drawings. SWITCH ACTION Arrow indicates keyway 1 C68 2 3 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 6.50 DIA (.255 DIA) 6.50 DIA (.255 DIA) 2.20 DIA (.086 DIA) 9.50 (.374) 6.50 DIA (.255 DIA) TERMINALS 13000 SERIES - PROFESSIONAL PUSHBUTTON SWITCHES 10.60 DIA (.417 DIA) 1 4.00 Maxi (.157 MAX) Front panel sealing with 'o'-ring (1) & sealing gasket (2). Protects switch against water & dust. Panel seal withstands 1 bar pressure even when switch is operated. 2.30 (.090) K 11.80 DIA (.464 DIA) C X640 Front panel sealing with 3 'o'-rings (1) & flatted bushing. Protects switch against water & dust. Panel seal withstands 1 bar pressure even when switch is operated. (Available with1/4" (6.35mm) bushing only). 2 6.40 DIA (.251 DIA) Tin plated terminals (for p.c. terminals only). 2.00 Maxi (.078 MAX) F 5.80 DIA (.228 DIA) K 1 X640 CAPS Note: replace last '0' in p/n with color code. 10.00 DIA (.393) 9.40 DIA (.370) 8.00 DIA (.314 DIA) U900 U1140 15.00 DIA (.590 DIA) 3.00 (.118) 6.35 (.250) 3.00 (.118) 6.35 (.250) 3.00 (.118) 4.00 (.157) 3.30 (.129) 7.50 (.295) 5.00 DIA (.196) U1720 U480 Standard 11.50x11.50 (.452 SQ) 11.50x11.50 (.452 SQ) Colors 1 2 3 4 5 6 7 7/1 9 U2020 Square U2430 Square Chrome plated 12.70 DIA (.500 DIA) For models with 1/4" (6.35mm) threaded bushings only. 15.50 DIA (.610 DIA) 8.00 (.314) 8.00 (.314) 5.80 (.228) 6.20 (.244) 10.50 DIA (.413 DIA) 6.35 DIA-40UNS (1/4-40UNS) U1636 For cap U1140 18.50 DIA (.728 DIA) 13.50 DIA (.531 DIA) 8.20 (.322) 8.20 DIA (.322 DIA) blue black green grey yellow red ivory white orange 6.35 DIA-40UNS (1/4-40UNS) 6.35 DIA-40UNS (1/4-40UNS) U840 For cap U480 6.00 (.236) DRESS NUTS 4.00 (.157) 6.00 (.236) 5.00 (.195) U630 3.00 (.196) 10.00 (.393) 3.00 (.118) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SPECIAL & SEALING OPTIONS U825 For cap U630 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C69 C FEATURES ● Designed for high reliability environments. ● Double shell case for high mechanical strength & high electrical insulation. ● Quick break momentary action DPDT models with 15/32" (11.9mm) threaded bushing. ● Panel sealed to IP67 and fully sealed switch body. ● Highly reliable for low level or power applications. ● Matte black finish on body, bushing, actuator and hardware. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Total Travel: Operating temperature range: Environmental: Silver & gold plated silver; 2 Amps at 250 VAC, 4 Amps at 125 VAC or 4 Amps at 28 VDC. (300 mA 30 VDC max. to prevent damage to gold plating.) Minimum load - 10 mA at 50 mV, 10µA at 5 VDC 10 milliohms maximum 1000 megohms min. at 500 VDC 1000 V rms min. - between terminals 2000 V rms min. - between poles and between terminals and frame At 2A 250VAC or 4A 28VDC - 10,000 cycles. At low level (50mV at 10mA) - 20,000 cycles .078" (2mm) -40°C to +85°C Shock: 50g - 11ms (IEC 68-2-27). Vibration: 10-500 Hx - 10g (IEC68-2-6) Salt spray: 96 hrs. (IEC68-2-11).Humidity: 56 days, 93% R.H.,40°C (IEC68-2-3) MATERIALS Contacts : Actuator: Bushing: Case: Hardware: Silver inlay - gold plated over nickel barrier Black chrome plated brass Black chrome plated brass Diallyl phthalate (DAP) with PBT external shell, epoxy sealed Supplied with 1 Hex Nut with black finish p/n U41. See drawing at end of section. AGENCY RECOGNITION CECC, GAM, QPL (Europe), MUAHAG & DAT (French defense military). Marking: Many models have full CECC recognition and are marked CECC. Consult factory for list of recognized models. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. 'build your own switch' order format c. Miscellaneous C70 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 13000X778 SERIES - HIGH PERFORMANCE PUSHBUTTON SWITCHES 13000X778 SERIES - HIGH PERFORMANCE PUSHBUTTON SWITCHES 16.00 (.629) 6.00 (.236) 8.00 DIA (.314 DIA) 7.50 (.295) 4.00 (.157) C 5 Maxi (.196 Max) 15.10 (.594) EPOXY 4.10 (.161) 4.00 (.157) 16.00 (.629) Handle position: 0.50 (.019) CIRCUIT ON MOM Flat 16.00 (.629) 7.50 (.295) 9.00 (.354) 5 Maxi (.196 Max) 15.10 (.594) EPOXY 4.10 (.161) 4.00 (.157) 16.00 (.629) Handle position: 0.50 (.019) CIRCUIT ON MOM 6.00 (.236) 8.00 DIA (.314 DIA) MODEL NO. 134459X778 1.50 (.059) 11.90 DIA-32UNS (15/32-32UNS) 2.50 (.098) Double pole - solder lug terminals - .354" (9mm) actuator Flat CIRCUIT ON MOM 16.00 (.629) 6.00 (.236) 6.00 (.236) 7.50 (.295) 4.00 (.157) 5 Maxi (.196 Max) 8.60 (.338) 15.10 (.594) EPOXY 4.00 (.157) 16.00 (.629) Handle position: 4.00 (.157) 0.50 (.019) MODEL NO. 132454X778 1.60 DIA (.062 DIA) 1.50 (.059) 8.00 DIA (.314 DIA) 11.90 DIA-32UNS (15/32-32UNS) 1.00 (.039) Double pole - straight p.c. terminals - .157" (4mm) actuator Flat CIRCUIT ON MOM 16.00 (.629) Handle position: 9.00 (.354) 6.00 (.236) 6.00 (.236) 4.00 (.157) 7.50 (.295) 0.50 (.019) MODEL NO. 132459X778 1.60 DIA (.062 DIA) 1.50 (.059) 8.00 DIA (.314 DIA) 11.90 DIA-32UNS (15/32-32UNS) 1.00 (.039) Double pole - straight p.c. terminals - .354" (9mm) actuator 5 Maxi (.196 Max) 15.10 (.594) 8.60 (.338) EPOXY 4.00 (.157) 16.00 (.629) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MODEL NO. 134454X778 1.50 (.059) 11.90 DIA-32UNS (15/32-32UNS) 2.50 (.098) Double pole - solder lug terminals - .157" (4mm) actuator Flat APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C71 13000X778 SERIES - HIGH PERFORMANCE PUSHBUTTON SWITCHES Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OWN SWITCH' ORDER FORMAT C SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Model Structure: Series Terminals & bushing Number of poles Electrical function Actuator Special options X 1 3 4 Double pole 2 Straight p.c. terminals, 15/32" (11.9mm) threaded bushing 4 Solder lug terminals, 15/32" (11.9mm) threaded bushing. 5 ON - MOM 4 9 7 7 8 High performance fully sealed matte black switch .157" (4mm) long .354" (9mm) long Options: Approvals/listings Example of completely specified model number: 132454X778CECC (NONE) C E C C (consult factory for details of approved models). POSITIONS AND CONNECTIONS Button position Terminal identification SWITCH ACTION TERMINALS Arrow indicates flat Connections ON A 1-2 B 1-2 MOM A 1-3 B 1-3 2 A 2 3 3 1 B 1 1.20 (.047) 1 3 2 2.50 (.098) Solder lug SEALING PANEL CUT-OUT Standard on all models: 12.00 DIA (.472 DIA) 1 8.60 (.338) II 4.10 (.161) I 1.70 (.066) Arrow indicates flat 1.00 (.039) Straight p.c. HARDWARE 14.00 (.551) 2.30 (.090) 3 'o'-rings (1) seal front panel and withstand 1 bar pressure, even when switch is operated. Splash-proof case. C72 4.00 Maxi (.157 MAX) Epoxy sealed terminals. 5.10 (.200) Panel thickness: .196" (5mm) max. 11.9 DIA-32UNS (15/32-32UNS) U41 matte black Hex Nut APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C FEATURES ● Single pole panel mounting models. ● NC & NO electrical functions with double break. ● Solder lug, screw, screw with clamp and right angle screw with clamp terminals. ● 4 optional actuator colors. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Total travel: 4 Amps at 250 VAC, 8 Amps at 125 VAC or 4 Amps at 24 VDC 10 milliohms max. at 1A 2VDC 1000 megohms minimum at 500 VDC 2000 V rms min. between terminals. 3000 V rms between terminals & frame 10,000 cycles at full load -20°C to +55°C NO: .177" (4.5mm) ± .011" (0.3mm) NC: .137" (3.5mm) ± .011" (0.3mm) MATERIALS Contacts: Actuator: Case: Bushing: Hardware: Silver Polyamide Polyamide Nickel plated brass Supplied with 1 Hex Nut p/n U166 & 1 Knurled Nut p/n U411. See hardware section of catalog. AGENCY RECOGNITION Model no's. with 'UU' are UL & CSA recognized. Models 1233X209 & 1233X209L are VDE recognized. Marking: Switches are supplied with recognitions marked. Solder lug/quick-connect terminals 8.00 DIA (.315 DIA) 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) Normally Open The '2' following the 'A' in model no. indicates black actuator. Substitute '6' for red or '7/1' for white, if desired. 12.00 (.472) 1213A2UU 9.20 (.362) Normally Closed 1.00 (.039) 1212A2 10.50 (.413) 7.50 (.295) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1200 SERIES - MOMENTARY PUSHBUTTON SWITCHES 17.00 (.669) 13.20 (.519) 6.35x0.80 (.25x0.031) 14.00 (.551) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C73 1200 SERIES - MOMENTARY PUSHBUTTON SWITCHES Screw terminals 8.00 DIA (.315 DIA) 1223A2UU Normally Open The '2' following the 'A' in model no. indicates black actuator. Substitute '6' for red or '7/1' for white, if desired. 1.00 (.039) 8.00 (.315) C 13.20 (.519) 14.00 (.551) Straight screw terminals and clamp 17.00 (.669) 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) Normally Open The '2' following the 'A' in model no. indicates black actuator. Substitute '6' for red or '7/1' for white, if desired. 6.35x0.80 (.25x.031) 13.20 (.519) 17.00 (.669) 14.00 (.551) Right angle screw terminals and clamp 1.00 (.039) 1203A2UU 12.00 (.472) Normally Closed 7.20 (.283) 1202A2 10.50 (.413) 7.50 (.295) 8.00 DIA (.315 DIA) 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 7.50 (.295) 8.00 DIA (.315 DIA) 10.50 (.413) Normally Open 7.00 (.275) The '2' following the 'A' in model no. indicates black actuator. Substitute '6' for red or '7/1' for white, if desired. 6.35x0.80 (.25x.031) 14.00 (.551) 1.00 (.039) 12.00 (.472) 12037A2UU 90 21.00 (.826) X209 - UL, CSA, VDE, SEMCO & NF-USE approved - solder lug/quick connect terminals 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 8.00 DIA (.315 DIA) Normally Open 9.20 (.362) The '2' following the 'A' in model no. indicates black actuator. Substitute '6' for red or '7/1' for white, if desired. 6.35x0.80 (.25x0.031) 14.00 (.551) C74 1.00 (.039) 12.00 (.472) 1233A2X209UU 10.50 (.413) 7.50 (.295) ( Note- U187 ground connector ring required if panel is not metallic or not connected to ground.Order separately). 13.20 (.519) 17.00 (.669) APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Normally Closed 12.00 (.472) 1222A2 10.50 (.413) 7.50 (.295) 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 1200 SERIES - MOMENTARY PUSHBUTTON SWITCHES X209 - UL, CSA, VDE, SEMCO & NF-USE approved - solder lug/quick connect terminals 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 8.00 DIA (.315DIA) 10.50 (.413) Normally Open 13.20 (.519) 6.35x0.80 (.25x0.031) 17.00 (.669) 14.00 (.551) SWITCH ACTION C 9.20 (.362) The '2' following the 'A' in model no. indicates black actuator. Substitute '6' for red or '7/1' for white, if desired. 1.00 (.039) 12.00 (.472) 1233A2X209LUU TERMINALS Arrow indicates keyway 4.50 (.177) 9.20 (.362) 6.35 (.25) 6.35x0.80 (.25x.031) Solder lug/ quick-connect 3.00 DIAx0.50 (.118 DIAx0.50) 3.00 DIAx0.50 (.118 DIAx0.50) 7.20 (.283) 9.20 (.362) 3.10 DIA (.122 DIA) Screw 0.80 (.031) 6.35 (.25) 0.80 (.031) Screw and clamp PANEL CUT-OUT: .480" (12.2mm) dia. GROUND CONNECTOR RING U187 0.80 (.031) Nickel plated 21.00 DIA (.826 DIA) 6.35 (.25) 12.20 DIA (.48 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 13.00 (.511) ( Note- U187 ground connector ring required if panel is not metallic or not connected to ground. Order separately). APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C75 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 1200M & 1200MR SERIES - MOMENTARY PUSHBUTTON SWITCHES C FEATURES ● Single pole panel mounting models. ● NC & NO electrical functions with double break. ● Solder lug, screw and screw with clamp terminals. ● Chrome plated domed or flat metal actuators . SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Total travel: 4 Amps at 250 VAC, 8 Amps at 125 VAC or 4 Amps at 24 VDC 10 milliohms max. at 1A 2VDC 1000 megohms minimum at 500 VDC 2000 V rms min. between terminals. 3000 V rms between terminals & frame 10,000 cycles at full load -20°C to +55°C NO: .177" (4.5mm) ± .011" (0.3mm) NC: .137" (3.5mm) ± .011" (0.3mm) MATERIALS Contacts: Actuator: Case: Bushing: Hardware: Silver Chrome plated brass on polyamide base Polyamide Nickel plated brass Supplied with 1 Hex Nut p/n U166 & 1 Panel Dress Nut U1868. See hardware section of catalog. AGENCY RECOGNITION Solder lug/quick-connect terminals 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) Normally Open 1.00 (.039) 1213MAUU 12.00 (.472) Normally Closed 9.20 (.362) 1212MA 7.50 (.295) 5.00 (.196) 8.00 DIA (.315 DIA) 5.00 (.196) Model no's. with 'UU' are UL & CSA recognized. Marking: Switches are supplied with recognized marks. The 'M' in model no. indicates flat actuator. Substitute 'MR' for domed actuator, if desired. 6.35x0.80 (.25x0.031) 17.00 (.669) 13.20 (.519) 14.00 (.551) Keyway C76 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 1200M & 1200MR SERIES - MOMENTARY PUSHBUTTON SWITCHES Screw terminals 1223MAUU Normally Open 7.50 (.295) Normally Closed C 8.00 (.315) The 'M' in model no. indicates flat actuator. Substitute 'MR' for domed actuator, if desired. 1.00 (.039) 12.00 (.472) 1222MA 14.00 (.551) 13.20 (.519) 17.00 (.669) Keyway Straight screw terminals and clamp 7.00 (.275) The 'M' in model no. indicates flat actuator. Substitute 'MR' for domed actuator, if desired. 1.00 (.039) Normally Open 7.50 (.295) 1203MAUU 12.00 (.472) Normally Closed 5.00 (.196) 5.00 (.196) 1202MA 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 8.00 DIA (.315 DIA) 6.35x0.80 (.25x.031) 13.20 (.519) 17.00 (.669) 14.00 (.551) Keyway TERMINALS Arrow indicates keyway 4.50 (.177) 3.00 DIAx0.50 (.118 DIAx0.50) 7.20 (.283) 9.20 (.362) 3.10 DIA (.122 DIA) 6.35 (.25) 6.35x0.80 (.25x.031) Solder lug/ quick-connect 3.00 DIAx0.50 (.118 DIAx0.50) 9.20 (.362) SWITCH ACTION Screw 0.80 (.031) 6.35 (.25) 0.80 (.031) Screw and clamp PANEL CUT-OUT: .480" (12.2mm) dia. SPECIAL CAP NUT 3.50 (.137) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.00 (.196) 5.00 (.196) 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 8.00 DIA (.315 DIA) 16.00 DIA (.629 DIA) U1874 Chrome plated cap nut, flat & plain May be ordered in place of panel dress nut. Order separately. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C77 C FEATURES ● Single and double pole panel mounting models. ● ON-OFF and ON-ON electrical functions. ● Solder lug, straight p.c. and quick-connect terminals. ● 7 optional actuator colors with matching knurled mounting nut. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Total travel: 3 Amps at 250 VAC or 6 Amps at 125 VAC 10 milliohms max. at 1A 2VDC 1000 megohms minimum at 500 VDC 2000 V rms min. between terminals. 3000 V rms between terminals & frame 10,000 cycles at full load -20°C to +65°C .177" (4.5mm) ± .019" (0.5mm) MATERIALS Contacts: Actuator: Case: Bushing: Hardware: Silver Polyamide Melamine-phenolic Nickel plated brass Supplied with 1 Hex Nut p/n U166 and 1 insulating Knurled Nut p/n U520. Knurled Nut supplied same color as actuator. See hardware section of catalog. AGENCY RECOGNITION Models 4731AUU, 4736AUU, 4741AUU & 4746AUU are UL, CSA and VDE recognized. Models 4831A, 4836A, 4841A & 4846A are VDE recognized. Marking: Switches are supplied with recognitions marked. ORDER FORMAT Fill in boxes below, for complete model number. Note: 'NONE' indicates box may be left empty. Model Number Select model number from those shown on next page. C78 Actuator & knurled nut color 0 0 0 0 0 0 0 1 2 3 5 6 7 9 / blue black green yellow red 1 white orange APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 4700 & 4800 SERIES - ALTERNATE ACTION PUSHBUTTON SWITCHES 4700 & 4800 SERIES - ALTERNATE ACTION PUSHBUTTON SWITCHES Solder lug/quick-connect terminals 4736AUU 4746AUU ON - ON 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) ON - OFF 7.30 (.287) 4741AUU 11.50 (.452) 4731AUU CIRCUIT 7.30 (.287) DOUBLE POLE MODEL NO. 12.50 (.492) SINGLE POLE MODEL NO. 12.00 (.472) 8.40 (.33) 19.00 (.748) 14.00 (.551) 15.00 (.59) 1 2 C 2.80x0.50 (.11x.019) Keyway 7.20 (.283) 7.20 (.283) Note: add color to model number see Order Format, prior page. 5.80 (.228) 3 2.80x0.50 (.11x.019) SP 5.80 (.228) 8.40 (.33) SP DP Straight p.c. terminals 14.50 (.57) 5.80 (.228) A1 A2 B5 B6 Note: add color to model number see Order Format, prior page. 1.20x0.5 (.047x.019) 5.00 (.196) 5.00 (.196) A3 B4 8.40 (.33) ON - ON 8.00 (.314) 21.00 (.826) 4846A 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 4836A 16.50 (.649) 23.00 (.905) ON - OFF 7.30 (.287) 4841A 11.50 (.452) 4831A CIRCUIT 15.50 (.61) DOUBLE POLE MODEL NO. 7.30 (.287) SINGLE POLE MODEL NO. 12.50 (.492) 8.00 DIA (.315 DIA) SP Keyway 1.20x0.50 (.047x.019) DP DP 12.00 (.472) 7.30 (.287) 7.70 (.303) Quick-connect terminals - .185" x .031" (4.7mm x 0.8mm) CIRCUIT 19.00 (.748) 2 47318A ON - OFF 47368A ON - ON 7.70 (.303) 1 12.00 DIAx0.75 SI (.472 DIAx0.75 IS) 12.50 (.492) 8.20 (.322) 8.00 DIA (.315 DIA) Note: add color to model number see Order Format, prior page. 14.00 (.551) 4.70 (.185) SINGLE POLE MODEL NO. 0.80 (.031) 3 Keyway SWITCH ACTION TERMINALS Solder lug/ quick-connect 3 2 1 Function 6 2 1 1.20x0.5 (.047x.019) Straight p.c. 3.00 (.118) (6.20) (.244) 2.80x0.50 (.11x.019) 8.20 (.322) 1.40 DIA (.055 DIA) 5.00 (.196) 1.20 (.047) 2.40 (.094) Arrow indicates keyway 7.20 (.283) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 8.00 DIA (.315 DIA) 4.70 (.185) Quick-connect .185" x .031" (4.7mm x 0.8mm) PANEL CUT-OUT: .480" (12.2mm) dia. Function 4 APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C79 ! New MD SERIES PUSHBUTTON SWITCHES C ● Momentary or maintained actions. ● 1, 2 & 4 pole 2 throw models. ● Printed circuit & panel mounting models. ● Self-cleaning bifurcated contacts. SPECIFICATIONS Contact ratings (resistive loads): Initial contact resistance: Insulation resistance: Dielectric strength: Electrical life: Operating temperature range: Operating force: 200 mA at 30 VDC 20 milliohms maximum 100 megohms minimum at 500 VDC Type 5: 500 VAC for 1 minute. Type 8: 250 VAC for 1 minute. 10,000 cycles minimum -20°C to +85°C Type 5: 300g ± 150g Type 8: 330g ± 150g MATERIALS Terminals: Actuator: Frame: Base: Sliding contact: MDPS522PN (MOMENTARY) MDPA522PN (MAINTAINED) Silver plated brass Polyacetal Steel with tin plating Phenolic laminated sheet Silver plated phosphor bronze 2P2T P.C. MOUNTING SCHEMATIC C80 MECHANICAL OUTLINE P.C. BOARD LAYOUT APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE FEATURES ! New MD SERIES PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MDPS522WN (MOMENTARY) MDPA522WN (MAINTAINED) 2P2T PANEL MOUNTING C SCHEMATIC MDPS542PN (MOMENTARY) MDPA542PN (MAINTAINED) 4P2T P.C. MOUNTING SCHEMATIC MDPS542WN (MOMENTARY) MDPA542WN (MAINTAINED) 4P2T 2P2T MECHANICAL OUTLINE P.C. BOARD LAYOUT PANEL MOUNTING SCHEMATIC MDPS822PN (MOMENTARY) MDPA822PN (MAINTAINED) MECHANICAL OUTLINE MECHANICAL OUTLINE P.C. MOUNTING SCHEMATIC MECHANICAL OUTLINE P.C. BOARD LAYOUT APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C81 ! New MD SERIES PUSHBUTTON SWITCHES Additional ordering information: Commonly ordered models are shown above with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Fill in boxes with selections shown for complete model number. (Allowable options are shown under each respective box). C TYPE 5: Series Action Type No. of Poles 5 M D Throws 2 2 pole 4 4 pole P S Momentary P A Maintained Terminals Contacts N 2 P p.c. W solder lug Non-shorting * *Shorting availableconsult factory. TYPE 8: Series Action Type No. of Poles 8 M D P S Momentary P A Maintained Throws Terminals 2 P 1 1 pole 2 2 pole Printed circuit Contacts N Non-shorting * Example of completely specified model number: MDPS542WN TERMINAL CONFIGURATIONS COLOR KNOBS FOR TYPE 8 MODELS MODEL NO. C152 C154 C156 PRINTED CIRCUIT C82 COLOR Black Gray Red SOLDER LUG APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 'BUILD YOUR OWN SWITCH' ORDER FORMAT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. MD1 SERIES PUSHBUTTON SWITCHES FEATURES MATERIALS ● Power ratings include TV-5 & TV-8 (TV-5 rating shown) ● Double pole single throw alternate action. ● TV-5 & TV-8 ratings are UL, CSA, VDE & SEMKO recognized. TV-8 ratings are also NEMKO, DEMCO, SETI and SEV recognized. ● Panel mounting with threaded mounting holes. Base: Phenolic, UL94V-O Frame: Zinc plated steel Actuator: 30% glass fiber PBT, color gray Terminals: Silver plated copper alloy Contacts: Silver copper alloy GENERAL SPECIFICATIONS ELECTRICALS Contact ratings: Insulation resistance: Dielectric withstanding voltage: Contact resistance: Electrical life: Mechanical life: MECHANICALS, THERMALS Actuation force: Operating temperature range: SOLDERING Solder heat resistance: C UL: 7.5 amps @ 125/250 VAC, TV5&8 CSA:10 amps @ 125/250 VAC,TV5&8 VDE, SEMCO, NEMCO, SETI, DEMCO & SEV: 8A/128A @ 250 VAC µT85 100 megohms min. (500 VDC) 1000 VAC for 1 minute 20 milliohms max. 25,000 cycles min. 30,000 cycles min. 500 grams ±200 grams -10 °C to +85 °C Travel: .098" (2.5mm) 230°C max. for 3 ±0.5 seconds MD12T5 SOLDER LUG TERMS. SCHEMATIC MECHANICAL OUTLINE SCHEMATIC MECHANICAL OUTLINE MD12L5 QUICK CONNECT TERMS. APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C83 C FEATURES MATERIALS ● ● ● ● Base: Phenolic, UL94V-O Frame: Zinc plated steel (panel mtg. models) Tin plated steel (p.c. mtg. models) Actuator: PBT, nylon 66, UL94V-2 min. Terminals: Silver plated copper alloy Contacts: Silver copper alloy Power ratings include TV-5 Single pole single throw alternate action. UL, CSA, VDE and SEMKO recognized. Panel mounting with threaded mounting holes and p.c. mounting with restraining bracket. GENERAL SPECIFICATIONS ELECTRICALS Contact ratings: Insulation resistance: Dielectric withstanding voltage: Contact resistance: Electrical life: Mechanical life: MECHANICALS, THERMALS Actuation force: Operating temperature range: SOLDERING Solder heat resistance: E UL & CSA: 15 amps @ 125 VAC, 10 amps @ 250 VAC, TV-5 VDE & SEMCO: 5A/80A @ 250 VAC µT85 100 megohms min. (500 VDC) 1000 VAC for 1 minute 20 milliohms max. 10,000 cycles min. 30,000 cycles min. 400 grams ±200 grams -10 °C to +85 °C 230°C max. for 3 ±0.5 seconds MD2BM4T1 PANEL MOUNTING WITH SOLDER LUG TERMS. SCHEMATIC MECHANICAL OUTLINE SCHEMATIC MECHANICAL OUTLINE MD2CP4T3 P.C. MOUNTING C84 P.C. BOARD LAYOUT APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. MD2 SERIES PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES PUSHBUTTON SWITCHES E Designed to meet stringent security requirements, all AV Series models are rugged, durable and cosmetically attractive. C All models feature: ● Long life. ● Anti-jamming construction. ● Minimum clearance between actuator and bushing, to prevent willful damage by means of insertion of foreign parts or matter. ● Protection against crushing of contacts and switch mechanism. In addition, all standard models are sealed to Specification IP54. IP54 specifies that the switch enclosure must be dust-protected (no harmful penetration) as well as resistant to splashing water. Optional sealing to IP65 is also available on all models, and is provided with a front panel sealing gasket as well. IP65 specifies that the switch enclosure must be dust-tight (no penetration) as well as resistant to jets of water from any direction. The AV Series consists of 3 categories of pushbutton switches designated Anti-Vandal, Security and Snap-Action Security. The distinctive features are: Anti-Vandal - Highest impact resistance provided by a mechanical stop and added ruggedness provided by a stainless steel actuator and bushing. The 19mm models meet IP..7 which specifies the switch must withstand a hammer blow to the actuator with a striking energy of 6 joules, while the 22mm models meet IP..9 which specifies the switch must similarly withstand 20 joules of energy.In both of these cases, no resulting damage is permissible per the specification. (Continued). APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C85 AV SERIES PUSHBUTTON SWITCHES Snap-Action Security - High impact resistance and ruggedness. All of these models feature tactile response and optional illumination and marking. C AV Series switches are shown on the following pages in order of the above categories. For ease in selecting the correct model for your application, the following table lists key parameters by switch category in order of ascending ratings. CATEGORY RATING(S) (RESISTIVE) ELECTRICAL . CONFIGURATION SIZE (mm) ADD'L. SPECS. SEE ALSO PAGE ANTIVANDAL 2 A 48 VDC 2 A 48 VDC SPST NO Momentary SPST NO Momentary 19 22 - C87 C88 SECURITY 1 A 30 V SPST NO & NC Mom 19 9000 Series C89 2 A 48 VDC 2 A 48 VDC SPST NO Momentary SPST NO Momentary 19 22 - C90 C91 SPST NO Momentary 19 300 Series C92 3 A 125 VAC, 2 A 250 VAC, 2.5 A 24 VDC SPST NC Momentary 22 1200 Series C93 6 A 125 VAC, 3 A 250 VAC, 3 A 24 VDC DPDT ON-ON Alternate 22 4700 Series C94 SPDT NO & NC Mom. 19 PB Series C95 50 mA 24 VDC SPST NO Momentary 19 - C96 50 mA 24 VDC SPST NO Mom. (lighted) 19 - C97 3A 120 VAC or 28 VDC. SPST ON-OFF Alternate 19 400 Series C98 SPDT & DPDT, NO & NC Mom. 19 800 Series C99 New ! 3 A 120 VAC or 28 VDC, New 1.5 A 250 VAC & Dry Circuit ! 6 A 125 VAC, 3 A 250 VAC, SNAPACTION SECURITY 7 A 30 VDC & Dry Circuit ! New 1.5 A 250 VAC & Dry Circuit New C86 ! 6 A 125 VAC, 3 A 250 VAC, 7 A 30 VDC & Dry Circuit APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Security - High impact resistance and ruggedness with a large variety of options, including actuator shapes, electrical functions, connections, finish and marking options. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES ANTI-VANDAL PUSHBUTTON SWITCHES E SPECIFICATIONS FEATURES Contact ratings: 2 A at 48 VDC max. (resistive load) Initial contact resistance: 10 milliohms max. at 1 A, 2 V Insulation resistance: 1000 megohms min. at 500 VDC Dielectric strength: 3000 V rms min. between terminals and frame and between terminals Electrical life: 10,000 cycles min. at full load Mechanical life: 1,000,000 cycles min. Operating temperature range: -20°C to +55°C Solder heat resistance: 300°C max. for 5 seconds Washing not recommended ● .755" (19 mm) dia. and .866" (22 mm) dia. models. ● Single pole NO momentary action. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. Series ORDER FORMAT: For complete model no., fill in 2 empty boxes with selected options shown below. Example of complete model no. AV191003C940N 19mm ● ● ● MATERIALS Contacts & terminals: Silver plated brass Bushing & Actuator: Stainless steel Case: PBT Bush./Act. Body Style Config. AV C 100 Hex. Mounting Nut: Nickel plated brass Function Cont.Matl. Term.Type 3 C 09 19 9D Bushing/Actuator configurations 9D flat Act. w/flush mount Bush. 19 curved Act. & Bush. N - no sealing (std'd) 9 Bush./Act. Matl. Sealing 40 N R T Screw terminals 09 flat Act. & curved Bush. For 09 & 19 Bush/Act Rear view all models R and T sealing options also feature increased impact resistance provided by knurled nut as shown below. For 9D Bush/Act R 1 Internal seal meets IP65 T 1 Internal seal & 2 front panel seals meet IP65 AV091003C940N (Model shown) Schematic Sealing Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). Mounting Holes APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C87 AV SERIES ANTI-VANDAL PUSHBUTTON SWITCHES 22mm Bush./Act. Body Style Config. AV 100 Function 3 Cont.Matl. Term.Type C 9 Bush./Act. Matl. Sealing 40 02 03 M2 M3 N R T Bushing/Actuator configurations 02 curved Act. & Bush. Screw terminals 03 flat Act. & curved Bush. Rear view all models M2 curved Actuator & curved Bushing with 'D' flat on Bushing or M3 flat Actuator & curved Bushing with 'D' flat on Bushing N - no sealing (std'd) For 02 & 03 Bush/Act R 1 Internal seal meets IP65 For M2 & M3 Bush/Act T 1 Internal seal & 2 front panel seals meet IP65 Min. dimensions for matrix mounting: 1.181" (30mm) x 1.181" (30mm). R and T sealing options also feature increased impact resistance provided by an internal ring as shown below. AV021003C940N (Model shown) Schematic C88 Sealing Mounting Holes APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. C Series ORDER FORMAT: For complete model no., fill in 2 empty boxes with selected options shown below. Example of complete model no. AV021003C940N SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SECURITY PUSHBUTTON SWITCHES E SPECIFICATIONS FEATURES Contact ratings: 1 A at 30 V max. (resistive load) 10 µA at 5 V min. Note: current above 100 mA damages the gold plating. Initial contact resistance: 10 milliohms max. at 1 A, 2 V Insulation resistance: 1000 megohms min. at 500 VDC Dielectric strength: 2000 V rms min. between terms. & frame. 1000 V rms min. between terminals Electrical life: 250,000 cycles min. at full load Mechanical life: 1,000,000 cycles min. Operating temperature range: -20°C to +55°C Solder heat resistance: 300°C max. for 5 seconds Washing not recommended ● ORDER FORMAT: For complete model no., fill in 2 empty boxes with selected options shown below. Example of complete model no. AV199035D200 Series ● ● ● ● .755" (19 mm) dia. models. Combined single pole NO & NC momentary action. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. MATERIALS Contacts: Gold plated silver Bushing & Actuator: Nickel plated brass (std'd) Case: PBT Bush./Act. Body Style Config. AV C 903 Hex. Mounting Nut: Nickel plated brass Function 5 Cont.Matl. Term.Type D 2 Bush./Act. Matl. Sealing 00 09 19 Blank E K Other Bushing/Actuator materials available - flat thermoplastic Actuators available - Actuator marking available - consult factory. 19mm Bushing/Actuator configurations 09 flat Act. & curved Bush. Solder lug terminals 19 curved Act. & Bush. Rear view all models Blank - no sealing (std'd) Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). E 1 Internal seal meets IP65 K 1 Internal seal & 2 front panel seals meet IP65 AV199035D200 (Model shown) Schematic Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C89 C SPECIFICATIONS FEATURES Contact ratings: 2 A at 48 VDC max. (resistive load) Initial contact resistance: 10 milliohms max. at 1 A, 2 V Insulation resistance: 1000 megohms min. at 500 VDC Dielectric strength: 3000 V rms min. between terms. & frame and between terminals Electrical life: 10,000 cycles min. at full load Mechanical life: 1,000,000 cycles min. Operating temperature range: -20°C to +55°C Solder heat resistance: 300°C max. for 5 seconds Washing not recommended ● Series ORDER FORMAT: For complete model no., fill in 2 empty boxes with selected options shown below. Example of complete model no. AV191003C900 AV ● ● ● ● .755" (19 mm) dia. and .866" (22 mm) dia. models. Single pole NO momentary action. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. MATERIALS Contacts & terminals: Silver plated brass Bushing & Actuator: Nickel plated brass (std'd) Case: PBT Bush./Act. Body Style Config. Hex. Mounting Nut: Nickel plated brass Function 100 3 Cont.Matl. Term.Type C 9 Bush./Act. Matl. Sealing 00 09 Blank 19 E 9P K 9B Other Bushing/Actuator materials available - flat thermoplastic Actuators available - Actuator marking available - consult factory. 19mm Bushing/Actuator configurations 19 curved Act. & Bush. Screw terminals 09 flat Act. & curved Bush. 9P flat Act. & curved Bush. with knurled nut for closer matrix mtg. 9B curved Act. & Bush. with knurled nut for closer matrix mtg. Rear view all models Min. dimensions for matrix mtg. for options 9B & 9P: .984"(25mm) x .984"(25mm). Order wrench p/n U1929 for knurled nut. Blank - no sealing (std'd) E 1 Internal seal meets IP65 1 Internal seal & 2 front panel seals meet IP65 K Schematic Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). AV191003C900 (Model shown) C90 Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SECURITY PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SECURITY PUSHBUTTON SWITCHES Series ORDER FORMAT: For complete model no., fill in 2 empty boxes with selected options shown below. Example of complete model no. AV021003C900 Bush./Act. Body Style Config. AV 100 Function 3 Cont.Matl. Term.Type C 9 Bush./Act. Matl. Sealing 00 02 Blank 03 E M2 K M3 Other Bushing/Actuator materials available - flat thermoplastic Actuators available - Actuator marking available - consult factory. 22mm Bushing/Actuator configurations C Screw terminals E 02 curved Act. & Bush. 03 flat Act. & curved Bush. Rear view all models M2 curved Actuator & curved Bushing with 'D' flat on Bushing or M3 flat Actuator & curved Bushing with 'D' flat on Bushing Blank - no sealing (std'd) For 02 & 03 Bush/Act E 1 Internal seal meets IP65 For M2 & M3 Bush/Act K 1 Internal seal & 2 front panel seals meet IP65 Min. dimensions for matrix mounting: 1.181" (30mm) x 1.181" (30mm). AV021003C900 (Model shown) Schematic Sealing Mounting Holes APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C91 ! New C SPECIFICATIONS FEATURES Contact ratings: Max. resistive loads: Q - 3 A 120 VAC (and life) or 28 VDC, 1.5 A 250 VAC - 10,000 cycles min. Also 1 A 120 VAC or 28 VDC, 0.5 A 250 VAC - 250,000 cycles min. B - 0.4 Volt-Amps max at 20 V max. - 250,000 cycles min. Initial contact resistance: 10 mΩ max. at 3 V, 0.1 A Insulation resistance: 10,000 megohms min. Dielectric strength: 1000 V rms min. Operating temperature range: -30°C to +85°C For additional specifications: See 300 Series switches ● Series ORDER FORMAT: For complete model no., fill in boxes with selected options shown below. Example of complete model no. AV19301ZQEK/UL 19mm 09 flat Act. & curved Bushing Bush./Act. Config. ● ● ● ● .755" (19 mm) dia. models. Single pole NO momentary action. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. MATERIALS Contacts: Q - Coin silver for power & UL models. B - Gold over nickel over brass for dry circuit models. Bushing & Actuator: Nickel plated brass (std'd) Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass Body Style Term. Type AV Z 09 19 29 39 49 301 305 Term. Seal Sealing Agency Recognition Blank K Blank U L E B Q Bushing/Actuator configuration 19 curved Act. & Bushing (standard) Cont. Matl. Solder lug terminals - (Z) 29 extended Act. & curved bushing 39 threaded Act. & curved bushing 49 thd'd Act. with mushroom cap & curved bushing Rear view all models Notes to Order Format: Blank - no sealing (std'd) Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). 301 models have .020" (0.5mm) overtravel and .110" (2.79mm) total travel. 305 models have .080" (2.03mm) overtravel and .110" (2.79mm) total travel. UL option available only with Q option. UL rating: 1 A 125 VAC or 0.5 A 250 VAC (75% power factor). UL file E66367. AV19301ZQE/UL (Model shown) K Schematic C92 1 Internal seal & 2 front panel seals meet IP65 Sealing Mounting Hole E option is epoxy terminal seal - standard . APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SECURITY PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SECURITY PUSHBUTTON SWITCHES E SPECIFICATIONS FEATURES Contact ratings: Max. resistive loads: , 3 A 125 VAC, 2 A 250 VAC & 2.5 A 24 VDC Initial contact resistance: 10 milliohms max. at 1 A, 2 V Insulation resistance: 1000 megohms min. at 500 VDC Dielectric strength: 2000 V rms min. between terms. & frame. 2000 V rms min. between terminals Electrical life: 10,000 cycles at 0.3 A 24 V Mechanical life: 1,000,000 cycles min. Operating temperature range: -20°C to +55°C Solder heat resistance: 300°C max. for 5 seconds Washing not recommended ● ORDER FORMAT: For complete model no., fill in 2 empty boxes with selected options shown below. Example of complete model no. AV021202C000 Series ● ● ● ● .866" (22 mm) dia. models. Single pole NC momentary action. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. MATERIALS Contacts & terminals: Silver plated brass Bushing & Actuator: Nickel plated brass (std'd) Case: PBT Bush./Act. Body Style Config. AV C 120 Hex. Mounting Nut: Nickel plated brass Function 2 Cont.Matl. Term.Type C 0 Bush./Act. Matl. Sealing 00 02 03 Blank E K Other Bushing/Actuator materials available - flat thermoplastic Actuators available - Actuator marking available - consult factory. 22mm Bushing/Actuator configurations 03 flat Act. & curved Bush. Straight screw terminals w/clamp 02 curved Act.& Bush. Rear view all models Blank - no sealing (std'd) Min. dimensions for matrix mounting: 1.181" (30mm) x 1.181" (30mm). E 1 Internal seal meets IP65 K 1 Internal seal & 2 front panel seals meet IP65 Note: Models on this page are VDE recognized and marked. AV021202C000 (Model shown) Schematic Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C93 C SPECIFICATIONS FEATURES Contact ratings: Max.resistive loads: 6 A 125 VAC, 3 A 250 VAC, & 3 A 24 VAC or VDC Initial contact resistance: 10 milliohms max. at 1 A, 2 V Insulation resistance: 1000 megohms min. at 500 VDC Dielectric strength: 3000 V rms min. between terms. & frame Electrical life: 10,000 cycles at full load, 50,000 cycles min. at 1 A 24 VAC of VDC Mechanical life: 50,000 cycles min. Operating temperature range: -20°C to +55°C Solder heat resistance: 300°C max. for 5 seconds ● Series ORDER FORMAT: For complete model no., fill in empty box with selected options shown below. Example of complete model no. AV044746A200 AV ● ● ● ● .866" (22 mm) dia. models. Double pole alternate action (ON - ON). Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. MATERIALS Contacts: Silver Bushing & Actuator: Nickel plated brass (std'd) Case: PBT Bush./Act. Body Style Config. 04 474 Hex. Mounting Nut: Nickel plated brass Function Cont.Matl. Term.Type 6 A 2 Bush./Act. Matl. Sealing 00 Blank E K Other Bushing/Actuator materials available - flat thermoplastic Actuators available - Actuator marking available - consult factory. 22mm Bushing/Actuator configurations Solder lug/quick connect terminals 04 curved Act.& Bush. Blank - no sealing (std'd) Min. dimensions for matrix mounting: 1.181" (30mm) x 1.181" (30mm). E 1 Internal seal meets IP65 K 1 Internal seal & 2 front panel seals meet IP65 AV044746A200 (Model shown) Schematic C94 Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SECURITY PUSHBUTTON SWITCHES ! New SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SECURITY PUSHBUTTON SWITCHES E SPECIFICATIONS FEATURES Contact ratings: Max. resistive loads: Q - 6 A 125 VAC, 3 A 250 VAC or 7 A 30 VDC. B - 0.4 Volt-Amps max at 20 V max. Initial contact resistance: 5 mΩ max. at 3 VDC, 0.1 A Insulation resistance: 200,000 megohms minimum between terminals & case ground. Dielectric strength: 2000 VAC min. between terminals and case ground. Electrical life: 100,000 cycles min. Operating temperature range: -30°C to +85°C For additional specifications: See PB Series switches ● Series ORDER FORMAT: For complete model no., fill in boxes with selected options shown below. Example of complete model no. AV19PB1-3P2Y1ZQEK/UL 19mm 09 flat Act. & curved Bushing AV ● ● ● Contacts: Q - Coin silver for power & UL models. B - Gold over nickel over brass for dry circuit models. Bushing & Actuator: Nickel plated brass (std'd) Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass Body Style Term. Type PB1-3P2Y1 Z Cont. Matl. Term. Seal Agency Recognition Blank K Blank UL Solder lug terminals - (Z) 29 extended Act. & curved bushing Blank - no sealing (std'd) Sealing E B Q Bushing/Actuator configuration 19 curved Act. & Bushing (standard) C MATERIALS Bush./Act. Config. 19 09 19 29 39 49 .755" (19 mm) dia. models. Single pole double throw NO & NC momentary action. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. ● 39 threaded Act. & curved bushing Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). 49 thd'd Act. with mushroom cap & curved bushing Rear view all models Notes to Order Format: UL option available only with Q option. UL rating: 6 A 125 VAC or 3 A 250 VAC (75% power factor). UL file E66367. E option is epoxy terminal seal - standard. AV19PB1-3P2Y1ZQE (Model shown) K Schematic 1 Internal seal & 2 front panel seals meet IP65 Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C95 C SPECIFICATIONS FEATURES Contact ratings: Max.resistive load: 50mA at 24 VDC Initial contact resistance: 100 milliohms max. Insulation resistance: 1000 megohms min. at 500 VDC Dielectric strength: 500 V rms min. between terms. 2000 V rms between terms & bushing Electrical life: 1,000,000 cycles at full load Operating force: 25 oz. ± 7 oz. Travel: .027" (0.7mm) ± .003" (0.1mm) Panel thickness: .039" (1mm) to .433" (11mm) Operating temperature range: -30°C to +70°C Solder heat resistance: 270 °C max. for 3 seconds ● .755" (19 mm) dia. models. ● Single pole NO momentary action. ● Standard - sealing protection per IP547 or IP549. ● Optional - sealing protection per IP657 or IP659. ● Extremely rugged and durable. ORDER FORMAT: For complete model no., fill in empty boxes with selected options shown below. Example of complete model no. AV19C703D200 Series MATERIALS Contacts: Gold plated dome Terminals: Gold plated brass Bushing & Actuator: Nickel plated brass (std'd) Case: PBT Hex. Mounting Nut: Nickel plated brass Bush./Act. Body Style Config. AV C70 Function Cont.Matl. Term.Type 3 D 2 Bush./Act. Matl. Sealing 00 09 19 Blank E K Other Bushing/Actuator materials available - consult factory. 19mm Bushing/Actuator configurations Solder lug terminals 09 flat Act.& curved Bush. 19 curved Act. & Bush. Rear view all models Blank - no sealing (std'd) Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). E 1 Internal seal meets IP65 K 1 Internal seal & 2 front panel seals meet IP65 AV09C703D200 (Model shown) Schematic C96 Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SNAP-ACTION SECURITY PB SWITCHES (LIGHTED) E SPECIFICATIONS FEATURES Contact ratings: Max.resistive load: 50mA at 24 VDC Initial contact resistance: 100 milliohms max. Insulation resistance: 1000 megohms min. at 500 VDC Dielectric strength: 500 V rms min. between terms. 2000 V rms between terms & bushing Electrical life: 1,000,000 cycles at full load Operating force: 25 oz. ± 7 oz. Travel: .027" (0.7mm) ± .003" (0.1mm) Panel thickness: .039" (1mm) to .433" (11mm) Operating temperature range: -30°C to +70°C Solder heat resistance: 270 °C max. for 3 seconds LED: Consult factory for options & specifications ● .755" (19 mm) dia. models. ● Single pole NO momentary action. ● Illuminated models. ● Standard - sealing protection per IP547 or IP549. ● Optional - sealing protection per IP657 or IP659. ● Extremely rugged and durable. MATERIALS Contacts: Gold plated dome Terminals: Gold plated brass Bushing & Actuator: Nickel plated brass (std'd) Case: PBT Hex. Mounting Nut: Nickel plated brass ORDER FORMAT: Series Bush./Act. Body Style Function For complete model Config. no., fill in empty AV 09 C7L 3 boxes with selected options shown below. Example of complete model no. AV09C7L3D2006 Other Bushing/Actuator materials available - consult factory. 19mm C Bushing/Actuator configurations Cont.Matl. Term.Type D Bush./Act. LED Matl. color 2 Sealing 00 6 (red) Blank 3 (green) E 5 (yellow) K 2 (red/green) Solder lug terminals 09 flat Act.& curved Bush. Rear view Blank - no sealing (std'd) E 1 Internal seal meets IP65 K 1 Internal seal & 2 front panel seals meet IP65 Schematic Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). AV09C7L3D2006 (Model shown) Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C97 ! New C SPECIFICATIONS FEATURES Contact ratings: Max. resistive loads: Q - 3 A 120 VAC (and life) or 28 VDC, 1.5 A 250 VAC - 10,000 cycles min. Also 1 A 120 VAC or 28 VDC, 0.5 A 250 VAC - 250,000 cycles min. B - 0.4 Volt-Amps max at 20 V max. - 250,000 cycles min. Initial contact resistance: 10 mΩ max. at 3 V, 0.1 A Insulation resistance: 10,000 megohms min. Dielectric strength: 1000 V rms min. Operating temperature range: -30°C to +85°C For additional specifications: See 400 Series switches ● Series ORDER FORMAT: For complete model no., fill in boxes with selected options shown below. Example of complete model no. AV19401ZQEK/UL 19mm 09 flat Act. & curved Bushing ● ● ● ● .755" (19 mm) dia. models. Single pole ON-OFF alternate & momentary actions. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. MATERIALS Contacts: Q - Coin silver for power & UL models. B - Gold over nickel over brass for dry circuit models. Bushing & Actuator: Nickel plated brass (std'd) Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass Bush./Act. Config. Body Style 09 19 29 39 49 401 402 Term. Type AV Term. Seal Z Agency Recognition Blank K Blank UL Solder lug terminals - (Z) 29 extended Act. & curved bushing Blank - no sealing (std'd) Sealing E B Q Bushing/Actuator configuration 19 curved Act. & Bushing (standard) Cont. Matl. 39 threaded Act. & curved bushing Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). 49 thd'd Act. with mushroom cap & curved bushing Rear view all models Notes to Order Format: 401 is alternate action. 402 is momentary action. 401 models have .026" (0.7mm) to contact closure, .106" (2.7mm) travel to activate switch and .137" (3.5mm) total travel. UL option available only with Q option. UL rating: 1 A 125 VAC or 0.5 A 250 VAC (75% power factor). UL file E66367. AV19401ZQE/UL (Model shown) K Schematic C98 1 Internal seal & 2 front panel seals meet IP65 Sealing E option is epoxy terminal seal - standard. Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES ! New SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. AV SERIES SNAP-ACTION SECURITY PUSHBUTTON SWITCHES E SPECIFICATIONS FEATURES Contact ratings: Max. resistive loads: Q - 6 A 125 VAC, 3 A 250 VAC or 7 A 30 VDC. B - 0.4 Volt-Amps max at 20 V max. Initial contact resistance: 20 mΩ max. at 3 VDC, 0.1 A Insulation resistance: 200,000 megohms minimum between terminals & case ground. Dielectric strength: 1500 VAC min. between terminals and case ground. Electrical life: 60,000 cycles min. Operating temperature range: -30°C to +85°C For additional specifications: See 800 Series switches ● Series ORDER FORMAT: For complete model no., fill in boxes with selected options shown below. Example of complete model no. AV19810KMZQK/UL 19mm 09 flat Act. & curved Bushing Bush./Act. Config. .755" (19 mm) dia. models. SPDT and DPDT with NO & NC momentary action. Standard - sealing protection per IP547 or IP549. Optional - sealing protection per IP657 or IP659. Extremely rugged and durable. ● ● ● ● MATERIALS Contacts: Q - Coin silver for power & UL models. B - Gold over nickel over brass for dry circuit models. Bushing & Actuator: Nickel plated brass (std'd) Case: Diallyl Phthalate Hex. Mounting Nut: Nickel plated brass Body Style Term. Type AV Cont. Matl. Sealing Agency Recognition Blank K Blank U L Z 09 19 29 39 49 810KM 820KM B Q Bushing/Actuator configuration 19 curved Act. & Bushing (standard) C Solder lug terminals - (Z) 29 extended Act. & curved bushing Blank - no sealing (std'd) 39 threaded Act. & curved bushing Min. dimensions for matrix mounting: .984" (25mm) x .984" (25mm). 49 thd'd Act. with mushroom cap & curved bushing Rear view (820 shown) Notes to Order Format: 810KM is SPDT 820KM is DPDT UL option available only with Q option. UL rating: 6 A 125 VAC or 3 A 250 VAC (75% power factor). UL file E66367. Epoxy terminal seal is standard on all models. AV19820KMZQ/UL (Model shown) K Schematic 1 Internal seal & 2 front panel seals meet IP65 Sealing Mounting Hole APEM, PO BOX 544, WAKEFIELD, MA USA 01880 TEL: (781) 246-1007 FAX: (781) 245-4531 TOLL FREE SALES: (877) 246-7890 C99