5000 series Toggle switches Distinctive features THE WIDEST RANGE IN MINIATURE SWITCHES A ❑ 17 actuators including toggles, paddle levers and locking levers in different lengths. ❑ 5 contact materials from dry circuit to 6A 125VAC and high inrush up to 120A 2 ms. ❑ 8 functions including maintained and momentary versions. ❑ 1 to 4 pole configurations. ❑ 12 terminal types including 9 for PC board mounting. Other types include quick-connect and wire-wrap. ❑ 6 bushing styles from 6 (.236) plain to 11,9 (15/32) threaded. ❑ 3 types of finish including military black. ❑ 4 approvals (UL - CSA - VDE - CECC) and 3 listings. ❑ 4 types of sealing for terminal or front panel requirements. ❑ Numerous accessories available for actuator and bushing options. A-22 www.apem.com APEM 5000 series Toggle switches Specifications ELECTRICAL SPECIFICATIONS • Current/voltage rating with resistive load : Contact Maximum Minimum Level* Silver (A) 3A 250VAC - 6A 125VAC - 4A 30VDC 50mA 10VDC III and IV Silver, gold plated (AD) 3A 250VAC - 6A 125 VAC - 4A 30VDC Gold plating withstands up to 100mA 30VDC 10mA 50mV 10µA 5V I to IV Brass, gold plated (CD) 0,4 VA at 20VAC or DC 10mA 50mV 10µA 5V I and II • For inductive, lamp or capacitive load, consult factory. • Initial contact resistance : 10 mΩ max. • Insulation resistance : 1.000 MΩ min. at 500VDC • Dielectric strength : 1.000 Vrms 50 Hz min. between terminals 1.500 Vrms 50 Hz min. between poles 1.500 Vrms 50 Hz min. between terminals and frame • Contact bounce : 2 ms max. • Electrical life at full load : 50.000 cycles for single and double pole 40.000 cycles for 3 pole 30.000 cycles for 4 pole • Low level or mechanical life : 100.000 cycles * For details, see Technical Information, end of catalogue. MATERIALS • Case : diallylphthalate (DAP) or high temperature plastic material (UL94-V0) • Actuator : brass, chrome plated • Bushing : brass, nickel plated • Housing : stainless steel or steel tin plated • Contacts A : silver AD : silver, gold plated CD : brass, gold plated X814 : for peak currrents, see section G. • Terminal seal : epoxy • Paddles : UL94HB polyamide • Lever caps : vinyl A GENERAL SPECIFICATIONS • Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut • Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut • Operating temperature : -40°C to +85°C AGENCY APPROVALS/PREFERENTIAL LISTS CECC 96201-007 EN 61058-1 For VDE, refer to 55000 series. QPL (Europe only) MUAHAG NATO Availability : consult factory for details of approved models. Marking : to order switches marked UL, CSA or CECC, complete appropriate box of ordering format. Preferential lists do not appear on the switches. APEM www.apem.com A-23 5000 series Toggle switches Overview 5 Number of poles SERIES A 3 4 5 6 Terminals Single pole Double pole Three pole Four pole Solder lugs or straight PC depending on model Solder lugs with Ø 11,9 (15/32) bushing (5600 switches) Wire wrap (for 5200 switches only) Right angle, horizontal mounting (5200 - 5400 switches) Right angle, vertical mounting (5200 - 5400 switches) Blank M MIWR W WW Terminals and bushing 0 1 2 3 4 5 6 7 9 Straight PC terminals, 5,08 (.200) terminal spacing, with Ø 6,35 (1/4) threaded bushing Straight PC or quick-connect terminals, 4,70 (.185) terminal spacing, with Ø 6 (.236) threaded bushing. Straight PC terminals, 4,70 (.185) terminal spacing, right angle, quick-connect or wire wrap terminals, with 6,35 (1/4) threaded bushing Straight PC terminals, 4 (.157) terminal spacing, with Ø 6 (.236) threaded bushing Straight PC terminals, 4 (.157) terminal spacing or right angle terminals , with Ø 6,35 (1/4) threaded bushing Solder lug terminals, with Ø 6 (.236) threaded bushing. Solder lug terminals, with Ø 6,35 (1/4) or Ø 11,9 (15/32) threaded bushing. Solder lug terminals, with Ø 6,35 (1/4) flatted bushing. Straight PC or quick-connect terminals, with Ø 6,35 (1/4) flatted bushing, 4,70 (.185) terminal spacing. Y Y4 Y6 Y7 Z ] ] Bracket mounting (5200 switches) ] ] Quick connect (5200 - 5100 - 5900 switches) Connections for function 4 Momentary for function 4 TH Standard CT Reversed See wiring diagrams end of section B. . For functions 4, 4-1R, 4-2R. Leave blank for all other functions. 1R ON ON MOM 2R MOM ON MOM Electrical functions 6 9 7 8 2 ON ON OFF MOM OFF ON OFF ON - ON ON MOM MOM MOM 4 ON ON ON ON ON MOM ▲ MOM ON MOM ▲ Leave blank for other functions. Function 4 Must not have blank in "connections" box. . ▲ Must not have blank in "momentary" box. ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches with threaded bushing - model structure of switches with plain bushing - options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. A-24 www.apem.com APEM 5000 series Toggle switches Overview Finish Fluorescent tip Blank Bright chrome finish G Matt black finish on bushing, actuator and hardware. Contact materials A AD CD Silver Silver, gold plated Brass, gold plated For peak currents, see X814, under Special Options. Special options Blank None 0.38 White fluorescent tip to lever Blank No special requirement X408 Front panel sealing by two O-rings X404 Horizontal right angle with reduced overall dimensions Other : specific bushing height, PC terminal length, finish, ratings, etc... See following pages. Available with matt black finish (G) only. Sealing Blank No sealing except where standard B Epoxy sealed terminals K Front panel sealing by one O-ring and sealing washer Sealing by two O-rings, see X408 under "Special options". threaded bushing -13 (std) 10,5 (.413) -2 16 (.629) -7 -8 (flat) 21,3 (.838) -9 (flat) 11,4 (.448) -12 (flat) 6,3 (.248) -16 5,5 (.216) -17 7 (.275) -21 (+ U640) 21,3 (.838) insulated -22 21,3 (.838) -23 14 (.551) -24 (large) 17,5 (.688) -25 16,30 (.642) -27 (large) 11,7 (.460) Caps U270 U1710 Length 11 (.433) 7,3 (.287) Paddles U240N U290N U390N 12,4 (.488) 20 (.787) 21,5 (.846) Approvals Levers Length with Caps and paddles plain bushing 13,5 (.531) 19 (.748) 6,6 (.259) 8,5 (.334) 10 (.393) - UL CSA VDE CECC Availability : Consult factory for details of approved models. - -4N 9 (.354) 12 (.472) 4N for use with paddle actuators only. Locking levers 1V 2V 3V 1 locked position 2 locked positions 3 locked positions Other, consult factory. For models with Ø 6,35 (1/4) bushing. Sealing boots are available. They are presented in section H. Mounting accessories : standard hardware supplied with all models with Ø 6,35 (1/4) or Ø 6 (.236) threaded bushing : 2 hex nuts 8 mm (.314) across flats, 1 locking ring and 1 lockwasher. Standard and special hardware available are presented in section I. Packaging unit : 25 pieces or 50 pieces depending on models. APEM www.apem.com A-25 A 5000 series Toggle switches - solder lug terminals Threaded bushing Ø 6,35 (1/4) : 5600 • 1, 2, 3 and 4 pole configurations 3.70 (.145) 1.90 (.074) ➞ Keyway 1.10 (.043) A 1 2 3 1.80 (.070) MODEL STRUCTURE Shown with standard lever (-13) ➞ Keyway I 1-2 I 2 II 1 III 8.00 (.314) 0.80 (.031) 10.50 (.413) Ø6.35-40UNS (1/4-40UNS) ➞ Keyway 1.00 (.039) 12.00 (.472) 12.00 (.472) 6 I 2 5 II 13.20 (.519) 3 III 5646 ON ON 10.50 8.00 (.413) (.314) 5649 ON OFF ON 5647 MOM OFF MOM 5648 ON OFF MOM Ø6.35-40UNS 5642 ON - MOM (1/4-40UNS) 5644* ON ON ON 5644 1R* ON ON MOM 5644 2R* MOM ON MOM * Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. 4 1.80 (.070) Ø3.00 (.118 DIA) 4.70 (.185) 1 3.70 (.145) 4.75 (.187) I 1-2 4-5 0.50 (.019) II 0.80 (.031) III 2-3 5-6 24˚ Double pole ➞ Keyway www.apem.com 3.70 (.145) 9 I 2 8 II 1 7 III 10.50 (.413) Ø6.35-40UNS (1/4-40UNS) 8.00 (.314) 4.75 (.187) 3 16.50 (.649) 13.20 (.519) 0.50 (.019) 13.10 (.516) 0.80 (.031) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 1.00 (.039) 24˚ I 1-2 4-5 7-8 1.80 (.070) 5656 5659 5657 5658 5652 II 4.70 (.185) III 2-3 5-6 8-9 Ø3.00 (.118 DIA) Three pole A-26 7.00 (.275) 3.70 (.145) 13.20 (.519) 3 4.70 (.185) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 12.00 (.472) 0.50 (.019) 1.00 (.039) Ø3.00 (.118 DIA) 5636 5639 5637 5638 5632 II 24˚ III 2-3 1.80 (.070) Single pole APEM 5000 series Toggle switches - solder lug terminals Threaded bushing Ø 6,35 (1/4) : 5600 II 7 10 III Ø6.35-40UNS (1/4-40UNS) 8.00 (.314) A 1.80 (.070) 10.50 (.413) 21.20 (.834) 13.20 (.519) 0.50 (.019) 3.70 (.145) 24˚ I 11 ON ON MOM MOM MOM ON MOM MOM 13.10 (.516) 0.80 (.031) OFF OFF OFF ON ON ON 12 8 Ø3.00 (.118 DIA) ON ON MOM ON ON ON ON MOM 5666 5669 5667 5668 5662 5664* 5664 1R* 5664 2R* 9 4.70 (.185) III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 1.00 (.039) 4.75 (.187) ➞ Keyway Four pole *Function 4 : DP in 4P case - specify CT or TH connections, see end of catalogue. PANEL CUT-OUT Ø2.20 (.086 DIA) Ø6.50 (.255 DIA) Ø6.50 (.255 DIA) 1.10 (.043) Ø6.50 (.255 DIA) 5.20 (.204) Standard APEM 2.70 (.106) With K sealing option 2.70 (.106) With X408 sealing option www.apem.com A-27 5000 series Toggle switches - solder lug terminals 5700 models • Flatted bushing Ø 6,35 mm (1/4) • 1, 2, 3 and 4 pole configurations A Diagram as per 5600 model MODEL STRUCTURE For model structure numbers, refer to 5600 models and replace 6 with 7. PANEL CUT-OUT Ø6.50 (.255 DIA) 2.70 (.106) Standard or with K sealing option 5500 models • Threaded bushing Ø 6 mm (.236) • 1, 2, 3 and 4 pole configurations Diagram as per 5600 model MODEL STRUCTURE For model structure numbers, refer to 5600 models and replace 6 with 5. PANEL CUT-OUT Ø2.20 (.086 DIA) Ø6.20 (.244 DIA) 6.20 (.244) Standard A-28 www.apem.com Ø6.20 (.244 DIA) 2.55 (.100) With X408 sealing option APEM 5000 series Toggle switches - solder lug terminals Threaded bushing Ø 11,9 (15/32) : 5600M • 1, 2, 3 and 4 pole configurations • Supplied with 2 hex nuts and 1 locking ring • Panel thickness up to 6 mm (.236) 3.70 (.145) 1.90 (.074) ➞ Keyway 1.10 (.043) 1 2 1.80 (.070) 3 MODEL STRUCTURE Shown with standard lever (-24) ➞ II 7.00 (.275) I 1-2 3.70 (.145) 11.00 (.433) I 0.50 (.019) III 2-3 2 II 1 3.70 (.145) 5 1 4 ON ON MOM MOM MOM ON MOM MOM II III 17.50 (.688) 0.80 (.031) 2 24˚ 6 0.50 (.019) I 3 11.90 (.468) 1.80 (.070) OFF OFF OFF ON ON ON 11.00 (.433) Ø5.00 (.196 DIA) ON ON MOM ON ON ON ON MOM I 1-2 4-5 Ø11.9-32UNS (15/32-32UNS) 12.00 (.472) 4.70 (.185) 5646M 5649M 5647M 5648M 5642M 5644M* 5644M 1R* 5644M 2R* II 13.20 (.519) III 2-3 5-6 11.90 (.468) 1.80 (.070) 17.50 (.688) 0.80 (.031) III Ø5.00 (.196 DIA) ➞ Keyway Double pole 24˚ ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 4.70 (.185) 5636M 5639M 5637M 5638M 5632M 13.20 (.519) 3 4.75 (.187) Single pole Keyway Ø11.9-32UNS (15/32-32UNS) * Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. ➞ Keyway APEM 12.10 (.476) 16.50 (.649) 8 1 7 www.apem.com III 17.50 (.688) 11.90 (.468) 1.80 (.070) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM II 4.75 (.187) 2 0.80 (.031) 9 0.50 (.019) I 3 3.70 (.145) 24˚ I 1-2 4-5 7-8 Ø5.00 (.196 DIA) 5656M 5659M 5657M 5658M 5652M II 4.70 (.185) III 2-3 5-6 8-9 13.20 (.519) Three pole Ø11.9-32UNS (15/32-32UNS) A-29 A 5000 series Toggle switches - solder lug terminals Threaded bushing Ø 11,9 (15/32) : 5600M ➞ Keyway 10 II ON ON MOM MOM MOM ON MOM MOM 0.50 (.019) 11 1 24˚ 2 III 4.70 (.185) 13.20 (.519) 12 3.70 (.145) 17.50 (.688) 11.90 (.468) 4.75 (.187) 1.80 (.070) A OFF OFF OFF ON ON ON I 3 Ø5.00 (.196 DIA) ON ON MOM ON ON ON ON MOM 5666M 5669M 5667M 5668M 5662M 5664M* 5664M 1R* 5664M 2R* 12.10 (.476) 21.20 (.834) III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 0.80 (.031) Four pole Ø11.9-32UNS (15/32-32UNS) *Function 4 : DP in 4P case - specify CT or TH connections, see end of catalogue. PANEL CUT-OUT Ø12.50 (.492 DIA) Ø12.50 (.492 DIA) 1.70 (.066) Ø3.50 (.137 DIA) 9.60 (.377) Standard 5.10 (.200) With K sealing option OTHER : M bushing can be combined with other types such as : 5200, Z, MIWR... Consult factory. A-30 www.apem.com APEM 5000 series Toggle switches - straight PC terminals Threaded bushing Ø 6,35 (1/4) : 5200 • Terminal spacing 4,7 mm (.185) • 1, 2, 3 and 4 pole configurations • Epoxy sealed terminals standard 1 2 5.30 (.208) For new projects, we recommend switches with support bracket (option Y) which holds the switch securely on the PCB. Other terminal lengths presented under "Special options". Also available with plain bushing, see "Special options" X371 3 4.00 (.157) ➞ Keyway 1.10 (.043) MODEL STRUCTURE Shown with standard lever (-13) I 2 II 1 III 10.50 (.413) 8.00 (.314) 7.00 (.275) 13.20 (.519) 0.50 (.019) 3 4.70 (.185) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 4.00 (.157) Ø6.35-40UNS (1/4-40UNS) Ø1.60 (.063 DIA) 1.10 (.043) I 1-2 Ø3.00 (.118 DIA) 5236 B 5239 B 5237 B 5238 B 5232 B II 13.30 (.523) 24° III 2-3 1.00 (.039) 0.80 (.031) ➞ Single pole Keyway 4.70 (.185) Epoxy Ø3.00 (.118 DIA) ➞ Keyway 5256 B 5259 B 5257 B 5258 B 5252 B ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 1.00 (.039) 14.40 (.567) 4.00 (.157) 0.50 (.019) I 1-2 4-5 7-8 3 9 I 2 8 II 1 7 III 10.50 (.413) Ø6.35-40UNS (1/4-40UNS) 8.00 (.314) Epoxy APEM www.apem.com Ø1.60 (.063 DIA) 4.70 (.185) Epoxy 24° II 4.70 (.185) III 2-3 5-6 8-9 Ø3.00 (.118 DIA) Three pole 4.75 (.187) 8.00 16.50 (.649) 13.20 (.519) 10.50 (.413) (.314) 5246 B ON ON 5249 B ON OFF ON 5247 B MOM OFF MOM Ø6.35-40UNS 5248 B ON OFF MOM (1/4-40UNS) 5242 B ON - MOM 5244 B* ON ON ON 5244 1R B* ON ON MOM 5244 2R B* MOM ON MOM *Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. 13.20 (.519) 0.50 (.019) III 0.80 (.031) 4 4.75 (.187) II 1 4.75 (.187) I 5 1.10 (.043) 6 2 12.00 (.472) 0.80 (.031) 3 1.10 (.043) I 1-2 4-5 4.00 (.157) 24° II 4.70 (.185) III 2-3 5-6 13.30 (.523) 1.00 (.039) 4.75 (.187) ➞ Keyway Double pole Ø1.60 (.063 DIA) 4.70 (.185) A-31 A 5000 series Toggle switches - straight PC terminals Threaded bushing Ø 6,35 (1/4) : 5200 - 5000 ➞ Keyway 10 III 4.70 (.185) 10.50 (.413) Ø6.35-40UNS (1/4-40UNS) Ø1.60 (.063 DIA) 4.75 (.187) 4.75 (.187) ON ON MOM MOM MOM ON MOM MOM 8.00 (.314) 21.20 (.834) 13.20 (.519) II 7 0.50 (.019) I 11 24° 12 8 4.00 (.157) 1.10 (.043) OFF OFF OFF ON ON ON 9 Ø3.00 (.118 DIA) ON ON MOM ON ON ON ON MOM 5266 B 5269 B 5267 B 5268 B 5262 B 5264 B* 5264 1R B* 5264 2R B* A 14.40 (.567) 1.00 (.039) III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 0.80 (.031) Four pole Epoxy 4.70 (.185) *Function 4 : DP in 4P case - specify CT ot TH connections, see end of catalogue. PANEL CUT-OUT 5200 - 5000 - 5400 Ø6.50 (.255 DIA) Ø2.20 (.086 DIA) 1.10 (.043) Ø6.50 (.255 DIA) 2.70 (.106) 5.20 (.204) Standard With K sealing option 5000 models 4.35 (.171) 5.50 (.216) • Terminal spacing 5,08 mm (.200) • Epoxy sealed terminals standard • 1 and 2 pole configurations 0.60 (.023) Diagram as per 5200 model MODEL STRUCTURE Shown with standard lever (-13) II I 1-2 4-5 III II I Ø3.00 (.118 DIA) 24˚ Ø6.35-40UNS (1/4-40UNS) Ø1.10 (.043 DIA) A-32 www.apem.com 5.08 (.200) 13.10 (.515) 4.35 (.171) 1.00 (.039) 8.00 (.314) Single pole Double pole 5036 5046 ON ON 5039 5049 ON OFF ON 5037 5047 MOM OFF MOM EPOXY 5038 5048 ON OFF MOM 0.60 1 0.60 2 3 (.023) (.023) 5.08 5032 5042 ON - MOM (.200) 5044* ON ON ON 12.00 13.20 (.472) (.519) 5044 1R* ON ON MOM 5044 2R* MOM ON MOM *Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. 0.60 (.023) 7.00 (.275) 5.08 (.200) III 2-3 5-6 ➞ Keyway 10.50 (.413) Terminal spacing 5,08 (.200) - single and double pole 5.08 (.200) APEM 5000 series Toggle switches - straight PC terminals 5400 models • Threaded bushing Ø 6,35 mm (1/4) • Terminal spacing 4 mm (.157) • 1, 2, 3 and 4 pole configurations A Diagram, as per 5200 model MODEL STRUCTURE For model structure numbers, refer to 5200 models and replace 2 with 4. Panel cut-out, see 5200. 5900 models ➞ Flat • Flatted bushing Ø 6,35 mm (1/4) • Terminal spacing 4,7 mm (.185) • 1, 2, 3 and 4 pole configurations 1 2 3 MODEL STRUCTURE For model structure numbers, refer to 5200 models and replace 2 with 9. PANEL CUT-OUT Ø6.50 (.255 DIA) 2.70 (.106) Standard or with K sealing option APEM www.apem.com A-33 5000 series Toggle switches - straight PC terminals 5100 models • Threaded bushing Ø 6 mm (.236) • Terminal spacing 4,7 mm (.185) • 1, 2, 3 and 4 pole configurations A Diagram, as per 5200 model MODEL STRUCTURE For model structure numbers, refer to 5200 models and replace 2 with 1. Panel cut-out, see below. 5300 models • Threaded bushing Ø 6 mm (.236) • Terminal spacing 4 mm (.157) • 1, 2, 3 and 4 pole configurations Diagram, as per 5200 model MODEL STRUCTURE For model structure numbers, refer to 5200 models and replace 2 with 3. PANEL CUT-OUT 5100 - 5300 Ø6.20 (.244 DIA) Ø2.20 (.086 DIA) 6.20 (.244) Standard A-34 www.apem.com Ø6.20 (.244 DIA) 2.55 (.100) With X408 sealing option APEM 5000 series Toggle switches - quick-connect terminals Threaded bushing Ø 6,35 (1/4) : 5200Z • Terminal spacing 4,7 mm (.185) • Epoxy sealed terminals standard • 1and 2 pole configurations 1 2 5.30 (.208) 6.50 (.255) ➞ Keyway 1.57 (.061) 3 MODEL STRUCTURE Shown with standard lever (-13) 13.10 (.515) I 1-2 2 24˚ II ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 7.00 (.275) 3 I 1 III 10.50 (.413) 8.00 (.314) EPOXY Ø6.35-40UNS (1/4-40UNS) 1.57 (.061) Ø3.00 (.118 DIA) 5236Z 5239Z 5237Z 5238Z 5232Z 5.30 (.208) 1.00 (.039) 4.70 (.185) II 0.78 (.030) III 2-3 13.20 (.519) ➞ Single pole Keyway ➞ Keyway 13.10 (.515) 4.70 (.185) 2 13.20 (.519) ON ON MOM MOM MOM ON MOM MOM III 1 OFF OFF OFF ON ON ON 10.50 (.413) Ø3.00 (.118 DIA) ON ON MOM ON ON ON ON MOM 12.00 (.472) 3 I II 5246Z 5249Z 5247Z 5248Z 5242Z 5244Z* 5244Z 1R* 5244Z 2R* 5.30 (.208) 1.00 (.039) 8.00 (.314) Ø6.35-40UNS (1/4-40UNS) EPOXY 4.75 (.187) I 1-2 4-5 0.78 (.030) II 1.57 (.061) III 2-3 5-6 24˚ Double pole *Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. PANEL CUT-OUT Ø2.20 (.086 DIA) Ø6.50 (.255 DIA) Ø6.50 (.255 DIA) 1.10 (.043) Ø6.50 (.255 DIA) 5.20 (.204) Standard APEM 2.70 (.106) With K sealing option 2.70 (.106) With X408 sealing option www.apem.com A-35 A 5000 series Toggle switches - quick-connect terminals 5900Z models • Flatted bushing Ø 6,35 mm (1/4) • Terminal spacing 4,7 mm (.185) • Epoxy sealed terminals standard • 1and 2 pole configurations A Diagram, as per 5900 model MODEL STRUCTURE For model structure numbers, refer to 5200Z models and replace 2 with 9. PANEL CUT-OUT Ø6.50 (.255 DIA) 2.70 (.106) Standard or with K sealing option 5100Z models • Threaded bushing Ø 6 mm (.236) • Terminal spacing 4,7 mm (.185) • Epoxy sealed terminals standard • 1and 2 pole configurations Diagram, as per 5200 model MODEL STRUCTURE For model structure numbers, refer to 5200Z models and replace 2 with 1. PANEL CUT-OUT Ø2.20 (.086 DIA) Ø6.20 (.244 DIA) 6.20 (.244) Standard A-36 www.apem.com APEM 5000 series Toggle switches - wire-wrap terminals Threaded bushing Ø 6,35 (1/4) : 5200MIWR 1 2 16.90 (.665) 18.00 (.708) • Terminal spacing 5,08 mm (.200) • Epoxy sealed terminals standard • 1and 2 pole configurations • Can also be used as extended PCB terminals ➞ Keyway 3 0.60 (.023) MODEL STRUCTURE Shown with standard lever (-13) ➞ Keyway I 1-2 2 24˚ II 3 I III ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 10.50 (.413) 8.00 (.314) EPOXY Ø6.35-40UNS (1/4-40UNS) Ø1.10 (.043 DIA) 5.08 (.200) 0.60 (.023) Ø3.00 (.118 DIA) 5236MIWR 5239MIWR 5237MIWR 5238MIWR 5232MIWR 7.00 (.275) 13.20 (.519) II 16.90 (.665) 1.00 (.039) 5.08 (.200) III 2-3 13.10 (.515) 0.60 1 (.023) Terminal spacing 5,08 (.200) - single pole ➞ Keyway ON ON MOM MOM MOM ON MOM MOM 10.50 (.413) 8.00 (.314) Ø6.35-40UNS (1/4-40UNS) EPOXY 13.20 (.519) 5.08 (.200) III Ø3.00 (.118 DIA) OFF OFF OFF ON ON ON 12.00 (.472) 3 I II ON ON MOM ON ON ON ON MOM 5246MIWR 5249MIWR 5247MIWR 5248MIWR 5242MIWR 5244 MIWR* 5244 1R MIWR* 5244 2R MIWR* 16.90 (.665) 1.00 (.039) Ø1.10 (.043 DIA) 5.08 (.200) 5.08 (.200) 13.10 (.515) 2 I 1-2 4-5 0.60 1 (.023) II 0.60 (.023) III 2-3 5-6 24˚ Terminal spacing 5,08 (.200) - double pole *Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. PANEL CUT-OUT Ø2.20 (.086 DIA) Ø6.50 (.255 DIA) Ø6.50 (.255 DIA) 1.10 (.043) Ø6.50 (.255 DIA) 5.20 (.204) Standard APEM 2.70 (.106) With K sealing option 2.70 (.106) With X408 sealing option www.apem.com A-37 A 5000 series Toggle switches - plain bushing Right angle terminals - horizontal : 5200W • Terminal spacing 4,7 mm (.185) • 1, 2 and 3 pole configurations Special switch 5200WX404 with reduced overall dimensions is presented under "Special options". A MODEL STRUCTURE Shown with standard lever (-13) 12.70 (.500) 12.00 (.472) II 24˚ 1.00 (.039) I 3 0.80 (.031) 6 6.00 11.00 (.236) (.433) 5.08 (.200) 13.50 (.531) III 2 5.08 (.200) 1.10 (.043) 7.40 (.291) 12.70 (.500) Ø1.60 (.062 DIA) 3.81 12.70 (.150) (.500) ON ON MOM MOM MOM ON MOM MOM Ø1.60 (.062 DIA) 4.70 (.185) Ø3.00 (.118 DIA) OFF OFF OFF ON ON ON 1 12.70 (.500) (.519) 13.20 4 7.40 (.291) (.019) 0.50 I 1-2 4-5 Ø6.25 (.246 DIA) ON ON MOM ON ON ON ON MOM 5.08 (.200) I 1.00 (.039) II 24˚ 3 1.10 (.043) 4.70 (.185) 5246W 5249W 5247W 5248W 5242W 5244W* 5244W 1R* 5244W 2R* 0.50 (.019) III 2 3.70 (.145) II 7.00 (.275) 5.08 (.200) Double pole III 2-3 5-6 6.00 11.00 (.236) (.433) 0.80 (.031) 1 Ø3.00 (.118 DIA) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 13.50 (.531) 3.70 (.145) I 1-2 Ø6.25 (.246 DIA) 5236W 5239W 5237W 5238W 5232W II 4.70 (.185) III 2-3 13.20 (.519) Single pole (.185) 4.70 3.81 (.150) Three pole A-38 www.apem.com 6.00 (.236) 12.5 (.492) 16.60 (.653) 4 7 5.08 (.196) 1.10 (.043) 7.20 (.283) 14.35 (.564) 3.81 (.150) 1.00 (.039) I 0.80 (.031) 6 II 24˚ 0.50 (.019) 9 13.20 (.519) III 5 3.81 14.35 (.150) (.564) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 13.50 (.531) Ø3.00 (.118 DIA) I 1-2 4-5 7-8 Ø6.25 (.246 DIA) 5256W 5259W 5257W 5258W 5252W II 4.70 (.185) III 2-3 5-6 8-9 3.70 (.145) 5.08 (.200) *Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. Ø1.60 (.062 DIA) (.185) 4.70 APEM 5000 series Toggle switches - plain bushing Right angle terminals - horizontal : 5400W SP 16.60 (.653) 8.30 (.326) 5200W 12.00 (.472) 6.00 (.236) 3.50 (.137) 7.00 (.275) PCB MOUNTING FOR DP A 3P 5400W models • Terminal spacing 4 mm (.157) • 1and 2 pole configurations Diagram, as per 5200W model MODEL STRUCTURE For model structure numbers, refer to 5200W single and double pole and replace 2 with 4. PC LAYOUT 5.08 (.200) 12.70 (.500) Ø1.60 (.062 DIA) 4.00 (.157) SP APEM www.apem.com 3.81 12.70 (.150) (.500) 5.08 (.200) Ø1.60 (.062 DIA) 4.00 (.157) DP A-39 5000 series Toggle switches - plain bushing Right angle terminals - vertical : 5200WW • Pin spacing 3,81 mm (.150) • 1, 2, 3 and 4 pole configurations A MODEL STRUCTURE Shown with standard lever (-13) I 1-2 3 I 2 II 24˚ 1 III 0.80 (.301) 1.00 (.039) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 5.65 (.222) 5.08 (.200) 3.81 (.150) 6 I 2 5 II 24˚ 1 4 III 0.80 (.301) 1.00 (.039) ON ON MOM MOM MOM ON MOM MOM 5.65 (.222) 5.08 (.200) A-40 www.apem.com III 1.00 (.039) 12.70 (.500) 1.10 (.043) 4.75 (.187) 3.81 (.150) 7 16.50 (.649) 13.20 (.519) II 24˚ 1 12.50 (.492) 7.20 (.283) 12.70 (.500) 3.00 (.118) I 8 6.00 (.236) 3.81 (.150) 5.08 (.200) Ø1.60 (.062 DIA) 12.70 (.500) 3.81 (.150) 4.75 (.187) 4.75 (.187) * and ** : see notes next page. 9 2 Ø3.00 (.118 DIA) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM 3 Ø6.25 (.246 DIA) 5256WW 5259WW 5257WW 5258WW** 5252WW** I 1-2 4-5 7-8 Ø1.60 (.062 DIA) 5.08 (.200) 13.10 (.515) II 3.81 (.150) 4.75 (.187) Three pole III 2-3 5-6 8-9 12.70 (.500) 0.80 (.031) OFF OFF OFF ON ON ON Ø3.00 (.118 DIA) ON ON MOM ON ON ON ON MOM Ø6.25 (.246 DIA) 5246WW 5249WW 5247WW 5248WW** 5242WW** 5244WW* 5244WW 1R* 5244WW 2R* 13.20 (.519) 3 12.00 (.472) 6.00 11.00 (.236) (.433) 3.00 (.118) I 1-2 4-5 5.08 (.200) 12.70 (.500) 1.10 (.043) 13.50 (.531) II 3.81 (.150) Ø3.00 (.118 DIA) Double pole III 2-3 5-6 12.70 (.500) Ø1.60 (.062 DIA) Ø6.25 (.246 DIA) 5236WW 5239WW 5237WW 5238WW** 5232WW** II 7.00 (.275) 1.10 (.043) III 2-3 6.00 11.00 (.236) (.433) 13.20 (.519) 13.50 (.531) 3.00 (.118) Single pole 5.08 (.200) APEM 5000 series Toggle switches - plain bushing Right angle terminals - vertical : 5200WW - 5400WW 13.10 (.515) III 13.20 (.519) 10 1.00 (.039) 12.70 (.500) 3.81 (.150) 5.08 (.200) 4.75 (.187) 3.81 (.150) 4.75 (.187) ON ON MOM MOM MOM ON MOM MOM 7.20 (.283) 3.00 (.118) II 24˚ 7 21.20 (.834) Ø1.60 (.062 DIA) 12.70 (.500) I 11 1.10 (.043) OFF OFF OFF ON ON ON 12 8 Ø6.25 (.246 DIA) ON ON MOM ON ON ON ON MOM 5266WW 5269WW 5267WW 5268WW** 5262WW** 5264WW* 5264WW 1R* 5264WW 2R* 9 12.50 (.492) Ø3.00 (.118 DIA) III II I 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 6.00 (.236) 0.80 (.031) Four pole 5.08 (.200) * Function 4 : SP in DP case, DP in 4P case - specify CT or TH connections, see end of catalogue. ** Functions 2 and 8 : reversed connection available, consult factory. 7.00 (.275) 12.00 (.472) SP DP 16.50 (.649) 21.20 (.834) 3P 4P 13.20 (.519) 6.60 (.259) PCB MOUNTING 5400WW models • Pin spacing 2,54 mm (.100) • 1, 2, 3 and 4 pole configurations Diagram as per 5200WW model MODEL STRUCTURE PC LAYOUT 2.54 (.100) Ø1.60 (.062 DIA) 12.70 (.500) 2.54 (.100) 2.54 (.100) 12.70 (.500) 12.70 (.500) APEM Ø1.60 (.062 DIA) Ø1.60 (.062 DIA) 12.70 (.500) Ø1.60 (.062 DIA) 2.54 (.100) For model structure numbers, refer to 5200WW models and replace 2 with 4. 5.08 (.200) 5.08 (.200) 5.08 (.200) 5.08 (.200) SP DP 3P 4P www.apem.com A-41 A 5000 series Toggle switches - plain bushing • Epoxy sealed terminals standard • 1and 2 pole configurations 1.10 (.043) 8.50 (.334) 4.00 (.157) 5.30 (.208) Brackets reduce mechanical stress on solder joints and increase resistance to vibrations. Bracket material : tin plated steel. 9.80 (0.385) Straight PC terminals - bracket mounting : 5200Y 1.10 (.043) Y - Y6 A Y4 - Y7 MODEL STRUCTURE Shown with standard lever (-13) Short bracket - width 15,75 (.620) - single pole : 5230Y I 1-2 II 24˚ Ø6.25 (.246 DIA) I Ø3.00 (.118 DIA) Ø1.60 (.062 DIA) 13.50 (.531) EPOXY 1 4.10 (.161) 3.18 (.125) 2 3 1.17 (.046) 0.40 (.015) 15.75 (.620) 15.75 (.620) 3.18 (.125) 4.70 (.185) ON ON ON OFF ON MOM OFF MOM ON OFF MOM ON - MOM III 5.60 (.220) 5236Y B 5239Y B 5237Y B 5238Y B 5232Y B II 13.00 (.511) III 2-3 7.00 (.275) Short bracket - width 15,75 (.620) - double pole : 5240Y II 24˚ Ø6.25 (.246 DIA) I Ø3.00 (.118 DIA) Ø1.60 (.062 DIA) EPOXY 1 3.18 (.125) 2 15.75 (.620) 3 1.17 (.046) 0.40 (.015) 12.00 (.472) 15.75 (.620) 3.18 (.125) 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM III 13.10 (.515) OFF OFF OFF ON ON ON 8.20 (.322) 6.00 (.236) ON ON MOM ON ON ON ON MOM I 1-2 4-5 13.00 (.511) 5246Y B 5249Y B 5247Y B 5248Y B 5242Y B 5244Y B* 5244Y 1R B* 5244Y 2R B* II 4.70 (.185) III 2-3 5-6 4.75 (.187) * Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. A-42 www.apem.com APEM 5000 series Toggle switches - plain bushing Straight PC terminals - bracket mounting : 5200Y4 - Y6 - Y7 Tall bracket - width 15,75 (.620) : 5200Y4 3 0.40 (.015) 2 15.75 (.620) 3.18 (.125) II 24˚ I Ø3.00 (.118 DIA) Ø1.60 (.062 DIA) EPOXY 1.27 (.050) 1 6.35 (.250) 2 3 0.40 (.015) Tall bracket - width 19,05 (.750) : 5200Y7 ON ON MOM ON ON ON ON MOM OFF OFF OFF ON ON ON ON ON MOM MOM MOM ON MOM MOM II 24˚ I 13.10 (.515) Ø1.60 (.062 DIA) EPOXY 1.27 (.050) 6.35 (.250) 19.05 (.750) 6.35 (.250) Ø6.25 (.246 DIA) Ø3.00 (.118 DIA) 4.70 (.185) III 6.35 (.250) 4.75 (.187) 6.00 (.236) Double pole 5246Y7 B 5249Y7 B 5247Y7 B 5248Y7 B 5242Y7 B 5244Y7 B* 5244Y7 1R B* 5244Y7 2R B* 8.20 (.322) I 1-2 4-5 16.00 (.629) Single pole 5236Y7 B 5239Y7 B 5237Y7 B 5238Y7 B 5232Y7 B II 5.20 (.204) III 2-3 5-6 6.35 (.250) 12.00 (.472) 19.05 (.750) 1 2 3 0.40 (.015) 19.05 (.750) 4.70 (.185) ON ON MOM MOM MOM ON MOM MOM 19.05 (.750) 13.10 (.515) OFF OFF OFF ON ON ON 6.35 (.250) Ø6.25 (.246 DIA) 6.00 (.236) ON ON MOM ON ON ON ON MOM 4.75 (.187) 4.70 (.185) III 3.18 (.125) 12.00 (.472) A 6.35 (.250) 12.00 (.472) 19.05 (.750) 8.20 (.322) 13.00 (.511) Double pole 5246Y6 B 5249Y6 B 5247Y6 B 5248Y6 B 5242Y6 B 5244Y6 B* 5244Y6 1R B* 5244Y6 2R B* I 1-2 4-5 Ø1.60 (.062 DIA) 15.75 (.620) 1 1.17 (.046) 15.75 (.620) 4.70 (.185) 13.10 (.515) EPOXY 4.70 (.185) Single pole 5236Y6 B 5239Y6 B 5237Y6 B 5238Y6 B 5232Y6 B II 3.18 (.125) 3.18 (.125) Short bracket - width 19,05 (.750) : 5200Y6 III 2-3 5-6 Ø6.25 (.246 DIA) Ø3.00 (.118 DIA) 6.35 (.250) 19.05 (.750) ON ON MOM MOM MOM ON MOM MOM I 4.70 (.185) OFF OFF OFF ON ON ON II 24˚ 4.70 (.185) ON ON MOM ON ON ON ON MOM III 6.00 (.236) Double pole 5246Y4 B 5249Y4 B 5247Y4 B 5248Y4 B 5242Y4 B 5244Y4 B* 5244Y4 1R B* 5244Y4 2R B* 8.20 (.322) I 1-2 4-5 16.00 (.629) Single pole 5236Y4 B 5239Y4 B 5237Y4 B 5238Y4 B 5232Y4 B II 5.20 (.204) III 2-3 5-6 4.75 (.187) * Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue. APEM www.apem.com A-43