LMH0001 SMPTE 259M / 344M Serial Digital Cable Driver General Description Features The LMH0001 SMPTE 259M / 344M Serial Digital Cable Driver is designed for use in SMPTE 259M / 344M serial digital video applications. The LMH0001 drives 75Ω transmission lines (Belden 8281, Belden 1694A or equivalent) at data rates up to 540 Mbps. The output voltage swing of the LMH0001 is adjustable via a single external resistor. The LMH0001 is powered from a single 3.3V supply. Power consumption is typically 125mW. The LMH0001 is available in a 16-pin LLP package. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ SMPTE 259M and SMPTE 344M compliant Data rates to 540 Mbps Supports DVB-ASI at 270 Mbps Differential input 75Ω differential output Adjustable output amplitude Single 3.3V supply operation Industrial temperature range: −40°C to +85°C 125mW typical power consumption 16–pin LLP package Footprint compatible with the LMH0002SQ and the GS9078A. Applications ■ ■ ■ ■ ■ ■ ■ ■ SMPTE 259M and SMPTE 344M serial digital interfaces DVB-ASI applications Sonet/SDH and ATM interfaces Digital routers and switches Distribution amplifiers Buffer applications Set top boxes Security cameras Typical Application 30027202 © 2008 National Semiconductor Corporation 300272 www.national.com LMH0001 SMPTE 259M / 344M Serial Digital Cable Driver January 9, 2008 LMH0001 ESD Rating (HBM) ESD Rating (MM) Absolute Maximum Ratings (Note 1) Supply Voltage: Input Voltage (all inputs) Output Current Storage Temperature Range Junction Temperature Lead Temperature (Soldering 4 Sec) Package Thermal Resistance θJA 16-pin LLP θJC 16-pin LLP −0.5V to 3.6V −0.3V to VCC+0.3V 28mA −65°C to +150°C +150°C 5kV 250V Recommended Operating Conditions Supply Voltage (VCC – VEE): Operating Free Air Temperature (TA) +260°C 3.3V ±5% −40°C to +85°C +78.9°C/W +42.7°C/W DC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Notes 2, 3). Symbol Parameter VCMIN Input Common Mode Voltage VSDI Input Voltage Swing VCMOUT Output Common Mode Voltage VSDO Output Voltage Swing ICC Supply Current Conditions Reference SDI, SDI Differential Min Typ 1.6 + VSDI/2 100 SDO, SDO Max Units VCC – VSDI/2 V 2000 mVP−P VCC – VSDO V Single-ended, 75Ω load, RREF = 750Ω 1% 750 800 850 mVP-P Single-ended, 75Ω load, RREF = 590Ω 1% 900 1000 1100 mVP-P 38 43 mA Typ Max Units 540 Mbps (Note 5) AC Electrical Characteristics Over Supply Voltage and Operating Temperature ranges, unless otherwise specified (Note 3). Symbol Parameter Conditions Reference DRSDI Input Data Rate (Note 4) SDI, SDI tjit Additive Jitter 270 Mbps SDO, SDO tr,tf Output Rise Time, Fall Time 20% – 80% Mismatch in Rise/Fall Time Duty Cycle Distortion tOS RLSDO Min psP-P 18 400 800 ps (Note 4) 30 ps (Note 4) 100 ps Output Overshoot (Note 4) 8 % Output Return Loss (Note 6) 15 560 20 dB Note 1: "Absolute Maximum Ratings" are those parameter values beyond which the life and operation of the device cannot be guaranteed. The stating herein of these maximums shall not be construed to imply that the device can or should be operated at or beyond these values. The table of "Electrical Characteristics" specifies acceptable device operating conditions. Note 2: Current flow into device pins is defined as positive. Current flow out of device pins is defined as negative. All voltages are stated referenced to VEE = 0 Volts. Note 3: Typical values are stated for VCC = +3.3V and TA = +25°C. Note 4: Specification is guaranteed by characterization. Note 5: Maximum ICC is measured at VCC = +3.465V and TA = +70°C. Note 6: Output return loss is dependent on board design. The LMH0001 meets this specification on the SD001SQ evaluation board from 5MHz to 1.5GHz. www.national.com 2 LMH0001 Connection Diagram 30027205 16-Pin LLP Order Number LMH0001SQ See NS Package Number SQB16A Pin Descriptions SOIC Pin # LLP Pin # 1 1 SDI Serial data true input. 2 2 SDI Serial data complement input. 3 3 VEE Negative power supply (ground). 4 4 RREF Output driver level control. Connect a resistor to VCC to set output voltage swing. 5 9 VCC Positive power supply (+3.3V). 7 11 SDO Serial data complement output. 8 12 SDO Serial data true output. — — Name 5, 6, 7, 8, NC 10, 13, 14, 15, 16 DAP VEE Description No connect. Connect exposed DAP to negative power supply (ground). 3 www.national.com LMH0001 OUTPUT INTERFACING The LMH0001 uses current mode outputs. Single-ended output levels are 800 mVP-P into 75Ω AC-coupled coaxial cable (with RREF = 750Ω). Output level is controlled by the value of the RREF resistor connected between the RREF pin and VCC. The RREF resistor should be placed as close as possible to the RREF pin. In addition, the copper in the plane layers below the RREF network should be removed to minimize parasitic capacitance. Device Operation INPUT INTERFACING The LMH0001 accepts either differential or single-ended input. The inputs are self-biased, allowing for simple AC or DC coupling. DC-coupled inputs must be kept within the specified common-mode range. SDI and SDI are self-biased at approximately 2.1V with VCC = 3.3V. Figure 1 shows the differential input stage for SDI and SDI. 30027204 FIGURE 1. Differential Input Stage for SDI and SDI. www.national.com 4 LMH0001 Physical Dimensions inches (millimeters) unless otherwise noted 16-Pin LLP Order Number LMH0001SQ NS Package Number SQB16A 5 www.national.com LMH0001 SMPTE 259M / 344M Serial Digital Cable Driver Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: Products Design Support Amplifiers www.national.com/amplifiers WEBENCH www.national.com/webench Audio www.national.com/audio Analog University www.national.com/AU Clock Conditioners www.national.com/timing App Notes www.national.com/appnotes Data Converters www.national.com/adc Distributors www.national.com/contacts Displays www.national.com/displays Green Compliance www.national.com/quality/green Ethernet www.national.com/ethernet Packaging www.national.com/packaging Interface www.national.com/interface Quality and Reliability www.national.com/quality LVDS www.national.com/lvds Reference Designs www.national.com/refdesigns Power Management www.national.com/power Feedback www.national.com/feedback Switching Regulators www.national.com/switchers LDOs www.national.com/ldo LED Lighting www.national.com/led PowerWise www.national.com/powerwise Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors Wireless (PLL/VCO) www.national.com/wireless THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION (“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright© 2008 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: [email protected] Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Technical Support Center Email: [email protected] German Tel: +49 (0) 180 5010 771 English Tel: +44 (0) 870 850 4288 National Semiconductor Asia Pacific Technical Support Center Email: [email protected] National Semiconductor Japan Technical Support Center Email: [email protected]