Transistors with built-in Resistor UNR22XX Series (UN22XX Series) Silicon NPN epitaxial planer transistor Unit: mm 0.40+0.10 –0.05 For digital circuits 0.16+0.10 –0.06 0.4±0.2 2 1 (0.95) (0.95) 1.9±0.1 (0.65) • Costs can be reduced through downsizing of the equipment and reduction of the number of parts. • Mini type package, allowing downsizing of the equipment and automatic insertion through tape packing and magazine packing. 5˚ 1.50+0.25 –0.05 ■ Features 2.8+0.2 –0.3 3 2.90+0.20 –0.05 ■ Resistance by Part Number 1.1+0.3 –0.1 1.1+0.2 –0.1 (R2) 10 kΩ 22 kΩ 47 kΩ 47 kΩ 5.1 kΩ 10 kΩ 10 kΩ 22 kΩ 10 kΩ 4.7 kΩ 4.7 kΩ 47 kΩ 47 kΩ 47 kΩ 2.2 kΩ 22 kΩ 0 to 0.1 • UNR2210 • UNR2211 • UNR2212 • UNR2213 • UNR2214 • UNR2215 • UNR2216 • UNR2217 • UNR2218 • UNR2219 • UNR221D • UNR221E • UNR221F • UNR221K • UNR221L • UNR221M • UNR221N • UNR221T • UNR221V • UNR221Z 10˚ Marking Symbol (R1) (UN2210) 8L 47 kΩ (UN2211) 8A 10 kΩ (UN2212) 8B 22 kΩ (UN2213) 8C 47 kΩ (UN2214) 8D 10 kΩ (UN2215) 8E 10 kΩ (UN2216) 8F 4.7 kΩ (UN2117) 8H 22 kΩ (UN2218) 8I 0.51 kΩ (UN2219) 8K 1 kΩ (UN221D) 8M 47 kΩ (UN221E) 8N 47 kΩ (UN221F) 8O 4.7 kΩ (UN221K) 8P 10 kΩ (UN221L) 8Q 4.7 kΩ (UN221M) EL 2.2 kΩ (UN221N) EX 4.7 kΩ (UN221T) EZ 22 kΩ (UN221V) FD 2.2 kΩ (UN221Z) FF 4.7 kΩ 1: Base 2: Emitter 3: Collector EIAJ: SC-59 Mini3-G1 Package Internal Connection R1 B C R2 E ■ Absolute Maximum Ratings Ta = 25°C Symbol Rating Unit Collector to base voltage Parameter VCBO 50 V Collector to emitter voltage VCEO 50 V Collector current IC 100 mA Total power dissipation PT 200 mW Junction temperature Tj 150 °C Storage temperature Tstg −55 to +150 °C Note) The part numbers in the parenthesis show conventional part number. Publication date: January 2002 SJH00010BED 1 UNR22XX Series ■ Electrical Characteristics Ta = 25°C Parameter Symbol Collector cutoff current Conditions Min Typ Unit µA ICBO VCB = 50 V, IE = 0 0.1 ICEO VCE = 50 V, IB = 0 0.5 IEBO VEB = 6 V, IC = 0 Emitter UNR2211 cutoff current UNR2212/2214/221D/ 221E/221M/221N/221T 0.2 0.5 UNR2213 0.1 UNR2210/2215/2216/2217 0.01 UNR221F/221K 1.0 UNR2219 1.5 UNR2218/221L/221V 2.0 UNR221Z VCBO IC = 10 µA, IE = 0 Collector to emitter voltage VCEO hFE 50 V IC = 2 mA, IB = 0 50 V VCE = 10 V, IC = 5 mA 35 Forward UNR2211 current UNR2212/221E transfer UNR2213/2214/221M 80 ratio UNR2210*/2215*/2216*/2217* 160 UNR2218/221K/221L 20 60 UNR2219/221D/221F 30 UNR221N/221T 80 460 400 UNR221V 6 20 UNR221Z 60 200 VCE(sat) IC = 10 mA, IB = 0.3 mA 0.25 IC = 10 mA, IB = 1.5 mA UNR221V Output voltage high level VOH VCC = 5 V, VB = 0.5 V, RL = 1 kΩ Output voltage low level VOL VCC = 5 V, VB = 2.5 V, RL = 1 kΩ UNR2213/221K VCC = 5 V, VB = 3.5 V, RL = 1 kΩ UNR221D VCC = 5 V, VB = 10 V, RL = 1 kΩ 0.04 V 0.25 4.9 V 0.2 V VCC = 5 V, VB = 6 V, RL = 1 kΩ UNR221E Transition frequency fT Input UNR2218 R1 resis- UNR2219 tance mA 0.4 Collector to base voltage Collector to emitter saturation voltage VCB = 10 V, IE = −2 mA, f = 200 MHz 150 −30% 0.51 1 UNR221M/221V 2.2 UNR2216/221F/221L/221N UNR221Z 4.7 UNR2211/2214/2215/221K 10 UNR2212/2217/221T 22 UNR2210/2213/221D/221E 47 Note) *: hFE rank classification (UNR2210/2215/2216/2217) 2 Max Rank Q R S hFE 160 to 260 210 to 340 290 to 460 SJH00010BED MHz +30% kΩ UNR22XX Series ■ Electrical Characteristics (continued) Ta = 25°C Parameter Symbol Conditions Min Max Resis- UNR2211/2212/2213/221L 0.8 1.0 1.2 tance UNR2214 0.17 0.21 0.25 UNR2218/2219 0.08 0.1 0.12 ratio R1/R2 Typ UNR221D 4.7 UNR221E 2.14 UNR221F/221T 0.47 UNR221K 2.13 UNR221M 0.047 UNR221N 0.1 UNR221V 1.0 UNR221Z 0.21 Unit Common characteristics chart PT T a Total power dissipation PT (mW) 250 200 150 100 50 0 0 20 40 60 80 100 120 140 160 Ambient temperature Ta (°C) Characteristics charts of UNR2210 Ta = 25°C Collector current IC (mA) 50 40 30 0.3 mA 0.4 mA 0.5 mA 0.6 mA 0.7 mA 0.1 mA 20 10 0 0 2 4 6 8 10 12 Collector to emitter voltage VCE (V) 100 hFE IC 400 IC / IB = 10 VCE = 10 V 350 30 Forward current transfer ratio hFE IB = 1.0 mA 0.9 mA 0.8 mA VCE(sat) IC Collector to emitter saturation voltage VCE(sat) (V) IC VCE 60 10 3 1 Ta = 75°C 0.3 25°C 0.1 0.03 −25°C 0.01 0.1 0.3 300 Ta = 75°C 250 25°C 200 −25°C 150 100 50 1 3 10 30 Collector current IC (mA) SJH00010BED 100 0 1 3 10 30 100 300 1 000 Collector current IC (mA) 3 UNR22XX Series Cob VCB IO VIN 4 3 2 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) f = 1 MHz IE = 0 Ta = 25°C 5 VIN IO 10 000 Output current IO (µA) Collector output capacitance Cob (pF) 6 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 30 1 0.4 100 0.03 0.6 0.8 1.0 1.2 0.01 0.1 1.4 Input voltage VIN (V) Collector to base voltage VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR2211 VCE(sat) IC 0.7 mA 0.6 mA 0.5 mA 120 100 0.4 mA 0.3 mA 80 60 0.2 mA 40 20 0.1 mA 0 0 2 4 6 8 10 12 100 IC / IB = 10 10 3 1 0.3 25°C −25˚C Ta = 75°C 200 25°C −25°C 100 0.03 0.01 0.1 0 0.3 1 3 10 30 1 100 3 10 10 000 3 2 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) 4 30 Collector current IC (mA) Collector current IC (mA) Output current IO (µA) Collector output capacitance Cob (pF) 300 IO VIN f = 1 MHz IE = 0 Ta = 25°C 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 30 100 Collector to base voltage VCB (V) 4 Ta = 75°C 0.1 Cob VCB 5 VCE = 10 V 30 Collector to emitter voltage VCE (V) 6 hFE IC 400 Forward current transfer ratio hFE Collector current IC (mA) Ta = 25°C IB = 1.0 mA 0.9 mA 0.8 mA 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 1 0.4 0.03 0.6 0.8 1.0 Input voltage VIN SJH00010BED 1.2 (V) 1.4 0.01 0.1 0.3 1 3 10 30 Output current IO (mA) 100 UNR22XX Series Characteristics charts of UNR2212 VCE(sat) IC Collector current IC (mA) IB = 1.0 mA 0.9 mA 0.8 mA 120 0.7 mA 0.6 mA 0.5 mA 100 0.4 mA 80 0.3 mA 60 0.2 mA 40 20 0.1 mA 0 0 2 4 6 8 10 12 100 IC / IB = 10 10 3 1 0.3 0.1 −25°C 300 Ta = 75°C 200 25°C −25°C 100 0.03 0.01 0.1 0.3 1 3 10 30 0 100 1 Collector current IC (mA) 3 4 3 2 30 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) f = 1 MHz IE = 0 Ta = 25°C 10 Collector current IC (mA) IO VIN 10 000 Output current IO (µA) Collector output capacitance Cob (pF) Ta = 75°C 25°C Cob VCB 5 VCE = 10 V 30 Collector to emitter voltage VCE (V) 6 hFE IC 400 Forward current transfer ratio hFE Ta = 25°C 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 30 1 0.4 100 0.03 0.6 0.8 1.0 1.2 0.01 1.4 0.1 Input voltage VIN (V) Collector to base voltage VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR2213 VCE(sat) IC 0.9 mA 0.8 mA 0.7 mA 0.6 mA 120 0.5 mA 100 0.4 mA 80 0.3 mA 60 0.2 mA 40 20 0.1 mA 0 0 2 4 6 8 10 12 Collector to emitter voltage VCE (V) 100 hFE IC 400 IC / IB = 10 VCE = 10 V 350 30 10 3 1 0.3 Ta = 75°C 25°C 0.1 0.03 0.01 0.1 −25°C 0.3 1 Forward current transfer ratio hFE Collector current IC (mA) Ta = 25°C IB = 1.0 mA 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 Ta = 75°C 300 25°C 250 −25°C 200 150 100 50 3 10 30 Collector current IC (mA) SJH00010BED 100 0 1 3 10 30 100 300 1 000 Collector current IC (mA) 5 UNR22XX Series Cob VCB IO VIN 4 3 2 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) f = 1 MHz IE = 0 Ta = 25°C 5 VIN IO 10 000 Output current IO (µA) Collector output capacitance Cob (pF) 6 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 30 1 0.4 100 0.03 0.6 0.8 1.0 1.2 0.01 0.1 1.4 Input voltage VIN (V) Collector to base voltage VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR2214 VCE(sat) IC Collector current IC (mA) IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 120 100 0.5 mA 80 0.4 mA 60 0.3 mA 40 0.2 mA 20 0.1 mA 0 0 2 4 6 8 10 12 100 10 3 1 0.3 Ta = 75°C 25°C 0.1 0.03 0.01 0.1 Ta = 75°C 200 25°C 150 −25°C 100 0 0.3 1 3 10 30 1 100 3 10 10 000 3 2 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) 4 30 Collector current IC (mA) Collector current IC (mA) Output current IO (µA) Collector output capacitance Cob (pF) 250 IO VIN f = 1 MHz IE = 0 Ta = 25°C 300 100 30 VO = 0.2 V Ta = 25°C 3 1 0.3 10 0.1 3 0.03 1 0 0.1 0.3 1 3 10 30 100 Collector to base voltage VCB (V) 6 300 50 −25°C Cob VCB 5 VCE = 10 V 350 30 Collector to emitter voltage VCE (V) 6 hFE IC 400 IC / IB = 10 Forward current transfer ratio hFE Ta = 25°C 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 1 0.4 0.6 0.8 1.0 1.2 Input voltage VIN (V) SJH00010BED 1.4 0.01 0.1 0.3 1 3 10 30 Output current IO (mA) 100 UNR22XX Series Characteristics charts of UNR2215 VCE(sat) IC 120 0.7 mA 0.6 mA 0.5 mA 100 0.4 mA 80 0.3 mA 60 0.2 mA 40 0.1 mA 20 0 0 2 4 6 8 10 12 100 IC / IB = 10 10 3 1 0.3 Ta = 75°C 25°C 0.1 0.03 −25°C 0.01 0.1 0.3 Ta = 75°C 250 200 25°C 150 −25°C 100 3 10 30 0 100 1 Collector current IC (mA) 3 10 4 3 2 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) f = 1 MHz IE = 0 Ta = 25°C 30 Collector current IC (mA) IO VIN 10 000 Output current IO (µA) Collector output capacitance Cob (pF) 300 50 1 Cob VCB 5 VCE = 10 V 350 30 Collector to emitter voltage VCE (V) 6 hFE IC 400 Forward current transfer ratio hFE Collector current IC (mA) Ta = 25°C IB = 1.0 mA 0.9 mA 0.8 mA 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 300 100 30 VO = 0.2 V Ta = 25°C 3 1 0.3 10 0.1 3 0.03 1 0 0.1 0.3 1 3 10 30 1 0.4 100 0.6 0.8 1.0 1.2 0.01 0.1 1.4 0.3 1 3 10 30 100 Output current IO (mA) Input voltage VIN (V) Collector to base voltage VCB (V) Characteristics charts of UNR2216 VCE(sat) IC Collector current IC (mA) IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 0.5 mA 120 100 0.4 mA 80 0.3 mA 60 0.2 mA 40 20 0.1 mA 0 0 2 4 6 8 10 12 Collector to emitter voltage VCE (V) 100 hFE IC 400 IC / IB = 10 VCE = 10 V 350 30 Forward current transfer ratio hFE Ta = 25°C 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 10 3 1 0.3 Ta = 75°C 25°C 0.1 0.03 0.01 0.1 25°C 250 −25°C 200 150 100 50 −25°C 0.3 Ta = 75°C 300 1 3 10 30 Collector current IC (mA) SJH00010BED 100 0 1 3 10 30 100 300 1 000 Collector current IC (mA) 7 UNR22XX Series Cob VCB IO VIN 4 3 2 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) 5 VIN IO 10 000 f = 1 MHz IE = 0 Ta = 25°C Output current IO (µA) Collector output capacitance Cob (pF) 6 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 30 1 0.4 100 0.03 0.6 0.8 1.0 1.2 0.01 0.1 1.4 Input voltage VIN (V) Collector to base voltage VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR2217 VCE(sat) IC Collector current IC (mA) 100 80 0.4 mA 0.3 mA 0.2 mA 60 40 20 0.1 mA 0 0 2 4 6 8 10 12 100 10 3 1 Ta = 75°C 0.3 25°C 0.1 0.03 0.01 0.1 200 Ta = 75°C 150 25°C 100 −25°C 0 0.3 1 3 10 30 1 100 3 10 000 3 2 30 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) 4 10 Collector current IC (mA) Collector current IC (mA) Output current IO (µA) Collector output capacitance Cob (pF) 250 IO VIN f = 1 MHz IE = 0 Ta = 25°C 300 100 30 VO = 0.2 V Ta = 25°C 3 1 0.3 10 0.1 3 0.03 1 0 0.1 0.3 1 3 10 30 100 Collector to base voltage VCB (V) 8 300 50 −25°C Cob VCB 5 VCE = 10 V 350 30 Collector to emitter voltage VCE (V) 6 hFE IC 400 IC / IB = 10 Forward current transfer ratio hFE T = 25°C a IB =1 .0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 0.5 mA Collector to emitter saturation voltage VCE(sat) (V) IC VCE 120 1 0.4 0.6 0.8 1.0 Input voltage VIN SJH00010BED 1.2 (V) 1.4 0.01 0.1 0.3 1 3 10 30 Output current IO (mA) 100 UNR22XX Series Characteristics charts of UNR2218 VCE(sat) IC Collector current IC (mA) 200 IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 160 120 0.6 mA 0.5 mA 0.4 mA 80 0.3 mA 40 0.2 mA 0.1 mA 0 0 2 4 6 8 10 12 100 IC / IB = 10 10 3 1 Ta = 75°C 0.3 25°C 0.1 Ta = 75°C 80 25°C −25°C 40 −25°C 0.01 0.1 0 0.3 1 3 10 30 100 1 Collector current IC (mA) 3 4 3 2 30 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) f = 1 MHz IE = 0 Ta = 25°C 10 Collector current IC (mA) IO VIN 10 000 Output current IO (µA) Collector output capacitance Cob (pF) 120 0.03 Cob VCB 5 VCE = 10 V 30 Collector to emitter voltage VCE (V) 6 hFE IC 160 Forward current transfer ratio hFE Ta = 25°C Collector to emitter saturation voltage VCE(sat) (V) IC VCE 240 300 100 30 VO = 0.2 V Ta = 25°C 3 1 0.3 10 0.1 3 0.03 1 0 0.1 0.3 1 3 10 30 1 0.4 100 0.6 Collector to base voltage VCB (V) 0.8 1.0 1.2 0.01 0.1 1.4 0.3 1 3 10 30 100 Output current IO (mA) Input voltage VIN (V) Characteristics charts of UNR2219 VCE(sat) IC Collector current IC (mA) 200 IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 160 120 0.5 mA 0.4 mA 0.3 mA 80 40 0.2 mA 0.1 mA 0 0 2 4 6 8 10 12 Collector to emitter voltage VCE (V) 100 hFE IC IC / IB = 10 30 10 3 1 Ta = 75°C 0.3 25°C 0.1 0.03 0.01 0.1 160 VCE = 10 V Forward current transfer ratio hFE Ta = 25°C Collector to emitter saturation voltage VCE(sat) (V) IC VCE 240 120 Ta = 75°C 80 25°C −25°C 40 −25°C 0 0.3 1 3 10 30 Collector current IC (mA) SJH00010BED 100 1 3 10 30 100 300 1 000 Collector current IC (mA) 9 UNR22XX Series Cob VCB IO VIN 10 000 5 4 3 2 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) f = 1 MHz IE = 0 Ta = 25°C Output current IO (µA) Collector output capacitance Cob (pF) 6 300 100 30 0.1 0.3 1 3 10 30 100 1 0.3 0.1 3 0.03 1 0.4 0 3 10 1 0.6 0.8 1.0 1.2 VO = 0.2 V Ta = 25°C 0.01 0.1 1.4 0.3 1 3 10 30 100 Output current IO (mA) Input voltage VIN (V) Collector to base voltage VCB (V) Characteristics charts of UNR221D VCE(sat) IC 20 15 0.2 mA 0.1 mA 10 5 0 0 2 4 6 8 10 12 100 10 3 1 0.3 −25°C 0.03 0.01 0.1 25°C −25°C 80 40 0 1 0.3 3 10 30 1 100 3 4 3 2 30 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) 5 10 000 10 Collector current IC (mA) IO VIN f = 1 MHz IE = 0 Ta = 25°C Ta = 75°C 120 Collector current IC (mA) Output current IO (µA) Collector output capacitance Cob (pF) Ta = 75°C 25°C 0.1 Cob VCB 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 30 Collector to base voltage VCB 10 VCE = 10 V 30 Collector to emitter voltage VCE (V) 6 hFE IC 160 IC / IB = 10 Forward current transfer ratio hFE Collector current IC (mA) Ta = 25°C 0.9 mA 0.8 mA 0.5 mA 0.7 mA 0.4 mA 25 0.6 mA 0.3 mA IB = 1.0 mA Collector to emitter saturation voltage VCE(sat) (V) IC VCE 30 100 (V) 1 1.5 0.03 2.0 2.5 3.0 3.5 Input voltage VIN (V) SJH00010BED 4.0 0.01 0.1 0.3 1 3 10 30 Output current IO (mA) 100 UNR22XX Series Characteristics charts of UNR221E VCE(sat) IC Collector current IC (mA) 50 40 0.3 mA 0.2 mA 0.4 mA 0.5 mA 0.1 mA 30 20 10 0 0 2 4 6 8 10 12 100 IC / IB = 10 10 3 1 Ta = 75°C 0.3 25°C 0.1 0.03 0.01 0.1 25°C −25°C 80 40 0.3 1 3 10 30 0 100 1 Collector current IC (mA) 3 4 3 2 30 100 300 1 000 VIN IO 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) f = 1MHz IE = 0 Ta = 25°C 10 Collector current IC (mA) IO VIN 10 000 Output current IO (µA) Collector output capacitance Cob (pF) Ta = 75°C 120 −25°C Cob VCB 5 VCE = 10 V 30 Collector to emitter voltage VCE (V) 6 hFE IC 160 Forward current transfer ratio hFE IB = 1.0 mA 0.7 mA Ta = 25°C 0.9 mA 0.6 mA 0.8 mA Collector to emitter saturation voltage VCE(sat) (V) IC VCE 60 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 0.3 1 3 10 30 1 1.5 100 0.03 2.0 2.5 3.0 3.5 0.01 0.1 4.0 Input voltage VIN (V) Collector to base voltage VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR221F VCE(sat) IC Collector current IC (mA) 200 0.9 mA 0.8 mA 0.7 mA 0.6 mA 160 120 IB = 1.0 mA 0.5 mA 80 0.4 mA 0.3 mA 40 0.2 mA 0.1 mA 0 0 2 4 6 8 10 12 Collector to emitter voltage VCE (V) 100 hFE IC 160 IC / IB = 10 VCE = 10 V 30 Forward current transfer ratio hFE Ta = 25°C Collector to emitter saturation voltage VCE(sat) (V) IC VCE 240 10 3 Ta = 75°C 1 0.3 25°C 0.1 0.03 0.01 0.1 120 Ta = 75°C 80 25°C −25°C 40 −25°C 0.3 1 3 10 30 Collector current IC (mA) SJH00010BED 100 0 1 3 10 30 100 300 1 000 Collector current IC (mA) 11 UNR22XX Series Cob VCB IO VIN 4 3 2 100 VO = 5 V Ta = 25°C 3 000 30 1 000 10 Input voltage VIN (V) 5 VIN IO 10 000 f = 1 MHz IE = 0 Ta = 25°C Output current IO (µA) Collector output capacitance Cob (pF) 6 300 100 30 10 VO = 0.2 V Ta = 25°C 3 1 0.3 0.1 1 3 0 0.1 1 0.3 3 10 30 0.03 1 0.4 100 0.6 Collector to base voltage VCB (V) 0.8 1.0 1.2 0.01 0.1 1.4 0.3 Input voltage VIN (V) 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR221K VCE(sat) IC Collector current IC (mA) 200 160 IB = 1.2 mA 120 1.0 mA 0.8 mA 80 0.6 mA 0.4 mA 40 0.2 mA 0 0 2 4 6 8 10 100 10 1 25°C −25°C 0.01 12 1 10 3 300 1 000 f = 1 MHz IE = 0 Ta = 25°C VO = 0.2 V Ta = 25°C 30 4 3 2 10 3 1 0.3 0.1 1 0.03 1 3 10 30 100 Collector to base voltage VCB (V) 0.01 0.1 0.3 1 3 10 30 Output current IO (mA) SJH00010BED VCE = 10 V 200 160 Ta = 75°C 120 25°C 80 −25°C 40 0 1 3 10 30 100 300 Collector current IC (mA) VIN IO Input voltage VIN (V) Collector output capacitance Cob (pF) 100 100 0 12 30 Collector current IC (mA) Cob VCB 5 Ta = 75°C 0.1 Collector to emitter voltage VCE (V) 6 hFE IC 240 IC / IB = 10 Forward current transfer ratio hFE Ta = 25°C Collector to emitter saturation voltage VCE(sat) (V) IC VCE 240 100 1 000 UNR22XX Series Characteristics charts of UNR221L VCE(sat) IC Collector current IC (mA) 200 160 IB = 1.0 mA 0.8 mA 120 0.6 mA 80 0.4 mA 40 0.2 mA 0 0 2 4 6 8 10 100 IC / IB = 10 10 1 Ta = 75°C 25°C 0.1 −25°C 0.01 1 12 3 Cob VCB 100 300 200 Ta = 75°C 160 25°C 120 −25°C 80 40 0 1 000 1 3 10 30 100 300 1 000 Collector current IC (mA) VIN IO Input voltage VIN (V) Collector output capacitance Cob (pF) 30 100 f = 1 MHz IE = 0 Ta = 25°C 5 10 VCE = 10 V Collector current IC (mA) Collector to emitter voltage VCE (V) 6 hFE IC 240 Forward current transfer ratio hFE Ta = 25°C Collector to emitter saturation voltage VCE(sat) (V) IC VCE 240 4 3 2 VO = 0.2 V Ta = 25°C 10 1 0.1 1 0.01 0.1 0 3 1 10 30 100 Collector to base voltage VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR221M IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 160 0.5 mA 0.4 mA 0.3 mA 120 80 0.2 mA 40 0.1 mA 10 hFE IC 500 IC / IB = 10 3 Forward current transfer ratio hFE Ta = 25°C 200 Collector current IC (mA) VCE(sat) IC Collector to emitter saturation voltage VCE(sat) (V) IC VCE 240 1 0.3 Ta = 75°C 25°C 0.1 0.03 −25˚C 0.01 VCE = 10 V 400 300 Ta = 75°C 25°C 200 −25°C 100 0.003 0 0 2 4 6 8 10 12 Collector to emitter voltage VCE (V) 0 0.001 1 3 10 30 100 300 Collector current IC (mA) SJH00010BED 1 000 1 3 10 30 100 300 1 000 Collector current IC (mA) 13 UNR22XX Series Cob VCB VIN IO 100 VO = 5 V Ta = 25°C f = 1 MHz IE = 0 Ta = 25°C VO = 0.2 V Ta = 25°C 30 4 3 2 Input voltage VIN (V) 103 Output current IO (µA) Collector output capacitance Cob (pF) IO VIN 104 5 2 10 10 10 3 1 0.3 0.1 1 0.03 0 0.1 1 0.3 1 3 10 30 0.4 100 0.6 0.8 1.0 1.2 0.01 1.4 0.1 Input voltage VIN (V) Collector to base voltage VCB (V) 0.3 1 3 10 30 100 Output current IO (mA) Characteristics charts of UNR221N VCE(sat) IC Collector current IC (mA) IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 0.5 mA 0.4 mA 120 100 80 0.3 mA 60 0.2 mA 40 0.1 mA 20 0 0 2 4 6 8 10 12 10 1 Ta = 75°C 0.1 25°C −25°C 0.01 10 1 Collector to emitter voltage VCE (V) f = 1 MHz IE = 0 Ta = 25°C Ta = 75°C 320 25°C 240 −25°C 160 80 0 1 000 1 10 100 1 000 Collector current IC (mA) VIN IO 100 VO = 5 V Ta = 25°C VO = 0.2 V Ta = 25°C 5 4 3 2 Input voltage VIN (V) 1 000 Output current IO (µA) Collector output capacitance Cob (pF) 400 IO VIN 10 000 100 10 1 0.1 10 1 0 1 10 100 Collector to base voltage VCB (V) 14 100 VCE = 10 V Collector current IC (mA) Cob VCB 6 hFE IC 480 IC / IB = 10 Forward current transfer ratio hFE Ta = 25°C 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 1 0.4 0.6 0.8 1 1.2 Input voltage VIN (V) SJH00010BED 1.4 0.01 0.1 1 10 Output current IO (mA) 100 UNR22XX Series Characteristics charts of UNR221T VCE(sat) IC Collector current IC (mA) IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 0.5 mA 0.4 mA 120 100 80 0.3 mA 60 0.2 mA 40 0.1 mA 20 0 0 2 4 6 8 10 10 1 Ta = 75°C 0.1 25°C −25°C 0.01 10 1 12 Cob VCB Ta = 75°C 320 25°C 240 −25°C 160 80 0 1 000 1 3 2 100 1 000 VIN IO 100 VO = 5 V Ta = 25°C Input voltage VIN (V) 4 10 Collector current IC (mA) 1 000 Output current IO (µA) Collector output capacitance Cob (pF) 400 IO VIN 10 000 f = 1 MHz IE = 0 Ta = 25°C 5 100 VCE = 10 V Collector current IC (mA) Collector to emitter voltage VCE (V) 6 hFE IC 480 IC / IB = 10 Forward current transfer ratio hFE Ta = 25°C 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 100 VO = 0.2 V Ta = 25°C 10 1 0.1 10 1 0 10 1 1 0.4 100 Collector to base voltage VCB (V) 0.6 0.8 1 1.2 0.01 0.1 1.4 1 10 100 Output current IO (mA) Input voltage VIN (V) Characteristics charts of UNR221V VCE(sat) IC Collector current IC (mA) 120 IB = 1.0 mA 100 0.9 mA 0.8 mA 0.7 mA 80 0.6 mA 60 0.5 mA 40 0.4 mA 20 0 0 2 4 6 8 0.3 mA 0.2 mA 10 12 Collector to emitter voltage VCE (V) 10 hFE IC 240 IC / IB = 10 Forward current transfer ratio hFE Ta = 25°C 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 1 Ta = 75°C 0.1 25°C −25°C VCE = 10 V 200 160 Ta = 75°C 120 25°C 80 −25°C 40 0 0.01 1 10 100 Collector current IC (mA) SJH00010BED 1 000 1 10 100 1 000 Collector current IC (mA) 15 UNR22XX Series Cob VCB IO VIN VIN IO 10 000 f = 1 MHz IE = 0 Ta = 25°C 100 VO = 5 V Ta = 25°C VO = 0.2 V Ta = 25°C 5 4 3 2 Input voltage VIN (V) 1 000 Output current IO (µA) Collector output capacitance Cob (pF) 6 100 10 10 1 0.1 1 1 0.4 0 10 1 100 0.6 0.8 1 1.2 0.01 0.1 1.4 Input voltage VIN (V) Collector to base voltage VCB (V) 1 10 100 Output current IO (mA) Characteristics charts of UNR221Z VCE(sat) IC Collector current IC (mA) IB = 1.0 mA 0.9 mA 0.8 mA 0.7 mA 0.6 mA 0.5 mA 0.4 mA 120 100 80 0.3 mA 60 0.2 mA 40 0.1 mA 20 0 0 2 4 6 8 10 12 10 1 Ta = 75°C 0.1 25°C −25°C 10 1 Ta = 75°C 320 240 25°C −25°C 160 80 1 1 000 f = 1 MHz IE = 0 Ta = 25°C 2 100 VO = 5 V Ta = 25°C Input voltage VIN (V) 3 100 1 000 VIN IO 1 000 4 10 Collector current IC (mA) IO VIN Output current IO (µA) Collector output capacitance Cob (pF) 100 10 000 100 VO = 0.2 V Ta = 25°C 10 1 0.1 10 1 0 1 10 100 Collector to base voltage VCB (V) 16 400 Collector current IC (mA) Cob VCB 5 VCE = 10 V 0 0.01 Collector to emitter voltage VCE (V) 6 hFE IC 480 IC / IB = 10 Forward current transfer ratio hFE Ta = 25°C 140 Collector to emitter saturation voltage VCE(sat) (V) IC VCE 160 1 0.4 0.6 0.8 1 1.2 Input voltage VIN (V) SJH00010BED 1.4 0.01 0.1 1 10 Output current IO (mA) 100 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR