Bussmann® HRCI-Misc Type K CIH, CIK, CIL Ceramic Body Fuses Dimensional Data K F A D J E G B L C H G (The CIL14 has a rejection hole, not a slot as shown above.) Motor Branch Circuit Application Guide CATALOG SYMBOL: CIH, CIK AND CIL HRI CERAMIC BODY FUSES 30, 60, AND 100 AMPERES 600V AGENCY APPROVALS: CSA C22.2 NO. 106 M92 • 2000,000A Interrupting capacity at 600V to CSA C22.2 No. 106 M92. • Offset blades for bolt down mounting. • Provides both overload and short circuit protection. Buss Full Voltage Starting Reduced Voltage HRCI-MISC Normal Duty Starting Heavy Duty Fuse Rating Maximum Full Load Current of Motor 3CIH07B 6CIH07B 10CIH07B 15CIH07B 20CIH07B 25CIH07B 30CIH07B 0.75 1.6 2.5 5.0 7.3 10.0 12.0 0.64 1.3 2.1 4.0 5.9 8.0 9.9 1.3 2.6 4.0 7.7 11.0 15.0 19.0 35CIK07B 40CIK07B 45CIK07B 50CIK07B 60CIK07B 14.0 16.0 18.0 22.0 27.0 11.0 13.0 14.0 17.0 21.0 21.0 25.0 27.0 31.0 39.0 70CIL14B 80CIL14B 90CIL14B 100CIL14B 32.0 40.0 44.0 53.0 26.0 31.0 35.0 41.0 49.0 60.0 66.0 77.0 Ratings, Categories and Dimensions Current Dimensions in Inches and (mm) Ratings (Amps) Catalog Number A MAX B MAX C MAX D NOM E NOM F NOM G NOM H NOM J MAX K NOM L MAX 1 3 6 10 15 20 25 30 1CIH07B 3CIH07B 6CIH07B 10CIH07B 15CIH07B 20CIH07B 25CIH07B 30CIH07B 2.25 (57) .94 (24) 3.38 (86) .38 (9.2) .04 (1.0) 2.88 (73) .21 (5.2) .31 (8) 1 (25.4) .10 (2.6) 2.38 (60) 35 40 50 60 35CIK07B 40CIK07B 50CIK07B 60CIK07B 2.28 (58) 1.06 (27) 3.56 (91) .5 (12.7) .05 (1.2) 2.88 (73) .21 (5.2) .41 (10.5) 1.09 (28) .13 (3.2) 2.38 (61) 80 90 100 80CIL14B 90CIL14B 100CIL14B 2.75 (70) 1.44 (37) 4.38 (111) .75 (19) .09 (2.5) 3.69 (94) .34 (8.7) .41 (10.5) 1.5 (38.5) – – 2.91 (74) 12-21-98 SB98107 Rev. A Form No.HRCI-MISC Page 1 of 2 BIF Doc #4130 Bussmann® HRI-Misc Type K CIH, CIK, CIL Ceramic Body Fuses Energy Let-Through Curves 1,000 AMPERE RATING 60 100 30 Time/Current-Curves 100,000 AMPERE2 SECONDS (I2t) TIME IN SECONDS 100 10 10,000 1,000 Total I2t at 600V 1 Total I2t at 460V Pre-Arcing I2t 100 100 60 10 30 .1 FUSE RATING (AMPERES) CURRENT IN AMPERES 10,000 1,000 100 1 10 .01 Peak Let-Through Curves 100 100 60 30 AMPERE RATING PEAK CURRENT (KA) 10 1 .1 100 10 1 .1 .01 PROSPECTIVE CURRENT (SYM. RMS KA) The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-21-98 SB98107 Rev. A Form No. HRCI-MISC Page 2 of 2 BIF Doc #4130