Digital Caliper 16 EX with marconnect Digital Caliper 16 EX and marconnect – the innovative and efficient connection for data processing. marconnect transmits your data directly and reliably via the electronic standard interfaces OPTORS-232C and Digimatic to a PC or printer. Just as required. http://www.mahr.com Calipers Digital Caliper 16 EX Features • Functions: ON/OFF RESET (Zero setting) mm/inch DATA (in connection with data connecting cable) • Capacitive measuring system, life of battery approx. 2 years • Slide and beam made of stainless steel, hardened • Locking screw • Measuring blades for inside measurement • Measuring speed 1,5 m/s (60”/s) • Scope of delivery: Case and battery • Depth measuring rod • High contrast 7,5 mm liquid crystal display • Step measuring function Technical data Measuring range mm (inch) 150 (6“) 150 (6“) Resolution Order no. Remarks mm / inch Error limit (DIN 862) mm (inch) 0,01 / .0005“ 0,01 / .0005“ 0,03 (.0015“) 0,03 (.0015“) 4102401 4102400 without data output data output Opto RS232C/Digimatic Accessories 234 16 EXr 4102410 16 EXd 4102411 0 ON OFF ø1,5 4102020 4102520 16 EX 10 16 Em 40 mm in Depth measuring bridge Battery 3V, type CR 2032 Data connecting cable RS232C (2 m), SUB-D-jack 9-pin Data connecting cable Digimatic (2 m), flat-plug 10-pin Accessories for data processing see General Catalogue „Dimensional Metrology - Hand Measuring Instruments“, chapter 9 Data connecting cable 16 EXr/16 EXd with data button Depth measuring bridge 16 Em 75 x 7 16 x 3 16 Order no.